renkforce RF-HS-360 On Ear Headset User Manual

**renkforce RF-HS-360 On Ear Headset User Manual

**

Installation Instruction

Intended use

The product is a wired stereo headset with microphone.

The product can connect directly via 3.5 mm jack or through a USB-A adaptor with in-line
controls.

Examples of use include online chats, conference calls, and gaming.

The product is designed for private and commercial use.

In commercial institutions, the accident prevention regulations of the Employer’s Liability Insurance Association for Electrical Systems and Operating Materials are to be observed.
The product is designed for private use only.
The product can be used in schools and training centres. The use must be supervised by
trained personnel.

If you use the product for purposes other than those described, the product may be damaged.

Improper use can result in short circuits, fires, electric shocks or other hazards.
The product complies with the statutory national and European requirements.
For safety and approval purposes, you must not rebuild and/or modify the product.
Read the operating instructions carefully and store them in a safe place. Make this product available to third parties only together with the operating instructions.

All company names and product names are trademarks of their respective owners. All rights
reserved.

The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI Trade Dress and the
HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. Android™ is a trademark of Google LLC.
Google Play and the Google Play logo are trademarks of Google LLC.
USB4®, USB Type-C® and USB-C® are registered trademarks of USB Implementers Forum.

Delivery contents

• Headset
• USB-A adaptor with in-line controls
• Operating instructions

Operating Instructions for download

Use the link www.conrad.com/downloads (alternatively scan the QR code) to download the complete operating instructions (or new/current versions if available). Follow the instructions on the web page.

Description of symbols

The symbol with the exclamation mark in the triangle is used to indicate important
information in this document. Always read this information carefully.

To prevent possible hearing damage, do not listen to high volume levels for long
periods

Safety instructions

Read the operating instructions carefully and especially observe the safety information. If you do not follow the safety instructions and information on proper handling, we assume no liability for any resulting personal injury or damage to property. Such cases will invalidate the warranty/guarantee.

General

This device is not intended to be used by persons (including children) with reduced physical, sensory or mental abilities or lack of experience and / or lack of knowledge unless they are supervised by a person responsible for their safety or have received instructions on how to use the device.

• Children shall not play with the appliance.
• The product is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become dangerous playing material for children.
• If you have questions which remain unanswered by this information product, contact our technical support service or other technical personnel.
• Maintenance, modifications and repairs must only be completed by a technician or an authorised repair centre.

Handling

• If it is no longer possible to operate the product safely, take it out of operation and protect it from any accidental use. Safe operation can no longer be guaranteed if the
  product:

  • is visibly damaged,
  • is no longer working properly,
  • has been stored for extended periods in poor ambient conditions or
  • has been subjected to any serious transport-related stresses.

• Handle the product carefully. Jolts, impacts or a fall even from a low height can damage the product.

• Consult an expert when in doubt about the operation, safety or connection of the appliance.

Operating environment

• Do not place the product under any mechanical stress.
• Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam and solvents.
• Protect the product from high humidity and moisture.
• Protect the product from direct sunlight.

Connected devices

• Also observe the safety and operating instructions of any other devices which are connected to the product.

Product overview

To prevent possible hearing damage, do not listen to high volume levels for long periods.

1. Adjustable headband
2. Microphone
3. 3 3.5 mm AUX jack
4. Volume: increase (+)/decrease (-)
5. Mute: sound
6. Mute: microphone
7. Status indicator
8. USB-A connector

Connection

Notes :

• The product is plug and play.
• Refer to the “Troubleshooting” section if it does not function correctly.
  
  3.5 mm AUX
  Use the 3.5 mm AUX connection when connecting to a mobile device.
  The microphone will be available for use when making calls.
  
  USB-A
  Use the USB-A adaptor with in-line controls when connecting to a computer.

Operation

status indicator will light red when muted.

Troubleshooting

cable/cable to device connections.
Microphone and speaker have screeching sound and/or echo.| ■  Lower the volume.■  Move microphone further away from the mouth.■  Check the computer microphone is not too close to the headset.
When connected to a computer via USB-A:■  Computer does not recog- nize the product.■  Product stops working.| ■  Try a different USB port on the computer.■  Disconnect the product, restart the computer, recon- nect.■  Check your computer sound settings. “ USB Audio Device ” should be selected as the (input / output) device. Refer to your computer operating system in- structions for information about how to do this.

Cleaning and care

Important:

• Do not use aggressive cleaning agents, rubbing alcohol or other chemical solutions.
  They damage the housing and can cause the product to malfunction.

• Do not immerse the product in water.

Clean the product with a dry, fibre-free cloth.

Disposal

This symbol must appear on any electrical and electronic equipment placed on the EU market. This symbol indicates that this device should not be disposed of as unsorted municipal waste at the end of its service life.

Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose of it separately from unsorted municipal waste. Spent batteries and accumulators, which are not enclosed by the WEEE, as well as lamps that can be removed from the WEEE in a non-destructive manner, must be removed by end users from the WEEE in a non-destructive manner before it is handed over to a collection point.

Distributors of electrical and electronic equipment are legally obliged to provide free takeback of waste. Conrad provides the following return options free of charge (more details on our website).

• in our Conrad offices
• at the Conrad collection points
• at the collection points of public waste management authorities or the collection points set up by manufacturers or distributors within the meaning of the ElektroG End users are responsible for deleting personal data from the WEEE to be disposed of.

It should be noted that different obligations about the return or recycling of WEEE may apply in countries outside of Germany.

References

• Conrad Electronic » All parts of success
• Download center

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>