goobay 61667 Electric Air Duster User Manual

goobay 61667 Electric Air Duster User Manual

Specifications

Symbols used

1. Safety instructions

The user manual is part of the product and contains important information for correct use.
• Read the user manual completely and carefully before use.

The user manual must be available for uncertainties and passing the product.
• Keep this user manual.

Risk of injury from wind and noise

• Never point the dust blower into people‘s eyes or ears.
• Never point the dust blower at animals.

Fire hazard

• Never point the dust blower at naked flames or glowing objects.
• Do not use the product to blow out candles.

Risk of entry

• Keep your hair away from the air vents.

Hair can be sucked in by the air stream and pulled out.

• Do not use the product if the protective grille is damaged.
• Do not insert objects into air vents or sockets!
• Keep the air vents free.
• Do not open the housing.
• Do not modify product and accessories.
• Do not short-circuit connectors and circuits.

Do not operate a device if it is not in working order. In such cases, it must be secured against unintentional further use.

• Use product, product parts and accessories only in perfect condition.
• Avoid stresses such as heat and cold, moisture and direct sunlight, microwaves, vibrations and mechanical pressure.
• In case of questions, defects, mechanical damage, trouble and other problems, non-recoverable by the documentation, contact your dealer or producer.

Not meant for children. The product is not a toy!

• Secure the product against accidental use.
• Secure packaging, small parts and insulation against accidental use.

Battery hazards
The batteries are not replaceable.
Batteries may be damaged and leak if not used for the intended purpose.

• Leave leaked, deformed or corroded batteries inside the product and dispose it by appropriate protectives.
• Never throw batteries into a fire.

Extreme heat can lead to explosion and/or leakage of corrosive liquid.

• Do not deform or disassemble the battery.
  Mechanical damage can cause gaseous substances to escape, which can be highly irritating, flammable or toxic.

• Do not immerse the battery in liquids.
  There is a danger of: Explosion, fire, heat, smoke and/or gas.

• Do not operate the product in an explosive environment.

2 Description and function

2.1 Product
The product is an electric dust blower including 5 attachments and a charging cable for contactless cleaning of e.g. PC accessories and for inflating objects such as air mattresses. It has an integrated LED display and a rechargeable 18650 Li-Ion battery. The dust blower can be operated in 3 power levels.

2.2 Scope of delivery
Electric Air Duster, 5 Attachments, Charging cable, User Manual

2.3 Operating Elements

1. Air outlet
2. Long attachment
3. Brush attachment
4. Short attachment
5. Pump attachment
6. Wide attachment
7. Function button
8. Air vents
9. LED display
10. USB-C™ socket
11. USB-C™ plug
12. USB-A plug

3. Intended use

This product is intended exclusively for private use and its intended purpose. This product is not intended for commercial use. We do not permit using the device in other ways like described in chapter „Description and Function“ or in the „Safety Instructions“. Use the product only in dry interior rooms. Not attending to these regulations and safety instructions might cause fatal accidents, injuries, and damages to persons and property.

4. Preparation

1. Check the scope of delivery for completeness and integrity.
2. Compare the specifications of all used devices and ensure compatibility.

5. Operation

5.1 Charging the battery
Fully charge the dust blower before using it for the first time. The dust blower cannot be used while it is charging.

1. Place the dust blower on a firm and non-slip surface and make sure it is switched off.

2. Connect the USB-A plug (12) of the charging cable to a suitable charging adapter.
   For the best charging results, the charging adapter should have an output of 5.0 V , 2.0 A.

3. Connect the USB-C™ plug (11) of the charging cable to the USB-C™ socket (10) of the dust blower.
   During charging, the USB-C™ socket of the dust blower lights up red. When the battery is fully charged, the socket lights up green.

4. Disconnect the cable connection after charging.

5.2 Switching on, selecting the power level and switching off

1. Press the function button (7) for about 4 seconds to switch on the dust blower.
   After switching on, the dust blower is in power level 1. The power level as well as the battery status as a percentage and in the form of a coloured ring are shown in the LED display (9). During use, the USB-C™ socket (10) lights up blue.

2. Press the function button briefly to switch between power levels 0 to 3.
   In power level 0, the dust blower does not generate any wind. In power level 1, the dust blower generates wind with 50 % power. In power level 2, the dust blower generates wind with 70 % power. In power level 3, the dust blower generates wind with 100 % power.

3. Press the function button again for about 4 seconds to switch off the dust blower.
   When the dust blower is in power level 0 for about 5 minutes, it switches off automatically.

5.3 Use as a dust blower

1. Plug the desired attachment (2, 3, 4, 5 or 6) onto the air outlet (1) of the dust blower. Alternatively, you can use the dust blower without the attachment.

2. Switch on the dust blower and set the desired power level.

3. Point the dust blower at the area to be cleaned.
   Dirt and dust will be blown away.

4. Switch off the dust blower after use.

5.4 Use as an air pump

1. Put the pump attachment (5) on the air outlet (1) of the dust blower.

2. Insert the pump attachment into the valve of the object to be inflated.
   Make sure that the pump attachment goes deep enough into the valve.

3. Switch on the dust blower and set the desired power level.
   The object will now be inflated.

4. When you feel that the object is sufficiently filled with air, pull the dust blower out of the valve and switch it off.

6 Maintenance, Care, Storage and Transportation

NOTICE! Material damage

• Only use a dry and soft cloth for cleaning.
• Do not use detergents or chemicals.
• Store the product out the reach of children and in a dry and dust-protected ambience when not in use.
• Charge the batteries every three months to ensure they maintain capacity when not in use for an extended period of time.
• Store cool and dry.
• Keep and use the original packaging for transport.

7. Disposal instructions

7.1 Product

According to the European WEEE directive, electrical and electronic equipment must not be disposed with consumers waste. Its components must be recycled or disposed apart from each other. Otherwise contaminative and hazardous substances can damage the health and pollute the environment.

As a consumer, you are committed by law to dispose electrical and electronic devices to the producer, the dealer, or public collecting points at the end of the devices lifetime for free.

Particulars are regulated in national right. The symbol on the product, in the user manual, or at the packaging alludes to these terms. With this kind of waste separation, application, and waste disposal of used devices you achieve an important share to environmental protection. WEEE No: 82898622

7.2 Packaging

Packaging can be disposed of free of charge at the suitable collection points – paper belongs in paper bins, plastics belong in yellow sacks and glass belongs in used glass bins.

DE4535302615620

8. EU Declaration of conformity

With the CE sign Goobay®, a registered trademark of the Wentronic GmbH ensures, that the product is conformed to the basic European standards and directives.

Goobay®
by Wentronic GmbH | Pillmannstraße 12
38112 Braunschweig | Germany

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>