Misolant MI300 Drafting Office Chair Standing Desk Instruction Manual

Misolant MI300 Drafting Office Chair Standing Desk Instruction Manual

We appreciate your favor of Misolant Product, welcome to join the Misolant family.
Please read

1. Do not discard any of the packaging until you are certain that you have all the necessary parts for the assembly.
2. Please ensure that the packaging is disposed of in a safe and environmentally responsible way.
3. During assembly, tighten screws by hand only. Once all screws are In place, you may tighten all screws completely.

Caution

1. Never use this chair as a step ladder.

2. Check that screws have not become loosened every 6months.
   Retighten if necessary.

3. Do not allow children to play with or operate the mechanism.

4. Keep hands and feet clear of mechanism.

5. Only the occupant should operate mechanism.

Accessories List

(A) Backrest x1
| (B) Seat Cushion x1
| (C) Armrest x2

---|---|---
(D) Base Plate x1
| (E) Gas Lift x1
| (F) Footrest x1

(G) Chair Base x5
| (H) Casters x5
| (I) Connector x1

(K) Screws x4
| (L) Screws x4
| (M) Screws x4

(N) Screws x5
| (O) Side Caps x4
| (P) Allen Wrench x1

Step1

1. Insert the Chair Base(G) into the Connector(l).
2. Use the Allen Wrench(P) to tighten the Chair Base(G) and the Connector(l) through the Screws M6X20mm(N).
3. Insert Casters(H) into the Chair Base(G).

Step2

1. Insert the Gas Lift(E) into the center of the Connector(l).
2. Insert Footrest(F) into the Gas Lift(E).

Kind tips: If the footrest can’t be inserted into the gas lift, By turning the footrest knob so that it can be inserted into the gas lift.

Step3
Tighten the Screws M6X25mm(M) with Allen Wrench(P) to fix 2 Armrest(C) to the back of Backrest(A) firmly.

Step4
Cover the Side Caps(O) on the corresponding Armrest(C).

Step 5

1. Fix the bottom of Armrest(C) to the back of Seat Cushion(B).
2. Tighten the Screws M6X30mm(L) with Allen Wrench(P) firmly.
3. First tighten hole site 1, but don’t tighten firmly, then tighten hole site 2.
4. Finally tighten hole site 1 and hole site 2 firmly.5.1 Fix the bottom of Armrest(C) to the back of Seat Cushion(B).

Caution: Please pay attention to hole site  the installation sequence of this step(5.3- 5.4), otherwise the gap between the left and right armrests and the cushion will be uneven.

Step 6
Fix Base Plate(D) to the bottom of Seat Cushion(B).
Tighten the Screws M6X25mm(K) With Allen Wrench(P) firmly.
Caution: There is a “FRONT” mark on the top of the Seat Cushion(B) and the Base Plate(D). Please install In this direction.

Step7

1. Carefully place the assembled Chair Frame onto the Gas Lift(l).
2. Aligning the hole into the Base Plate(H) on the Seat Cushion(C) with the Gas Lift(l).

HOW TO USE THE TILT FUNCTION?

1. Loose the tilting tension by the knob.
2. You can use the tilt function by adjusting the lever in the direction of the arrow.
3. When pulling out the adjustment lever, the tilt function works normally.
4. when the adjustment lever is inserted, the tilt function is closed.

1. You can adjust the tilting tension by the knob.
2. Viewing from the bottom of the chair, turn clockwise to loosen, counterclockwise to tighten.

HOW TO ADJUST CUSHION AND FOOTREST HEIGHT?

You can adjust the height of the chair by adjusting the lever in the direction of the arrow.
You can adjust the footrest by the knob.

HOW TO ADJUST LUMBAR SUPPORT?

Find the best position for you by adjusting the waist support up and down.

Subscribe
@Misolant @Misolant @Misolant @Misolant
Please feel free to contact us by Amazon message, or send email to us vip@misolant.net, if you need any help.
If any part is missing, please contact us by Amazon message or our customer service email : vip@misolant.net.
Customer Service: vip@misolant.net

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>