BEABA Simply Zen Baby Monitor Instruction Manual

BEABA Simply Zen Baby Monitor

WELCOME
Thank you for purchasing our SIMPLY ZEN Baby Audio Monitor, you will soon be able to listen to your baby from a distance. To use our product in the best possible conditions, we invite you to carefully read this instruction manual and to keep it for further reference.

WARNINGS AND PRECAUTIONS FOR USE

Read and keep these instructions. Heed to the warnings.
WARNINGS
TO AVOID ANY RISK OF STRANGULATION, IT IS ESSENTIAL TO CHECK THAT THE ADAPTOR CABLE IS NEVER WITHIN A CHILD’S REACH. PLACE THE ADAPTOR AT LEAST 1 METRE FROM THE CHILD.
WARNING: to avoid any risks of explosion, electrical shock, short-circuit or overheating:

• Never immerse the Parental Unit or Baby Unit or the charger in water or clean under running water.
• Keep the battery away from any excessive heat source, such as radiators, heating, ovens, cooking surfaces or other appliances producing heat.
• To avoid overheating, never cover the Baby Monitor with a towel, blanket, or any other object.

Do not touch the contacts of the plug with pointed or metallic objects. When in constant use, the adaptor of the Baby Unit may become warm to the touch. This is a common effect and not a defect.

Precautions for use

• This appliance must only be used for the purpose described in this manual.
• Place the Baby Unit beyond a child’s reach, on a flat surface
• For the best performance of your Audio Baby Monitor and to reduce interferences, it is not recommended to plug other electrical appliances into the same electrical socket as your Baby Monitor. (Do not use a multi-socket).
• Before plugging the Baby Monitor into the mains, check that the voltage indicated on the Baby Monitor adaptors is consistent with the mains voltage.
• If the appliance is not in use, turn it off using the OFF button.
• The product must be installed by adults. Keep small components away from children during assembly.

Adult supervision

• The Baby Monitor provides assistance and added peace of mind. It should not be used as a medical appliance nor as a substitute for adult supervision. In no circumstances can it replace responsible and appropriate supervision on behalf of an adult: it is strongly recommended that an adult supervises baby regularly as well as through the Video Baby Monitor.
• Never leave the home if your child is alone, even for a short time.
• Never place the Baby Unit inside the cot, bed or playpen.
• For their safety, never let children play with the Baby Monitor.

Storing precautions

• Use and store the Baby Monitor in a place where the temperature is between 10°C and35°C
• Keep the Baby Monitor away from direct sunlight.
• If you think that the battery is damaged, remove it from the battery well and stop using the product. Contact BEABA Consumer Services. Never use a damaged battery.
• Never put the adaptor cable in a place where it could be damaged (humidity/ heat etc.).

Replacement parts

• Use the supplied batteries for the Parental Unit. Only use the accessories supplied by the

Manufacturer: if the battery is damaged, it must be replaced by the manufacturer via Consumer Services:
You can contact the BABA Consumer Services for technical assistance and avoid any risks.

• If needed, you can use the same type of adaptor as the one supplied.FR

PRODUCT OVERVIEW

Transmitter (Baby Unit)

Receiver (Parental Unit)

BEFORE USE

1. Baby Unit
   Plug the Baby Unit into the mains and place the Baby Unit at least 1 metre from baby’s head and up to 2.5 metres from baby for a good audio quality The Baby Unit must remain plugged into the mains to operate as it does not have a battery.

2. Parental Unit
   When the Parental Unit is switched on for the first time, it must be plugged into the mains for 8 hours to recharge the supplied adapter (5V DC /0.55 A). If the Parental Unit is already recharged, you can switch it on and use it directly without plugging it in thanks to the Lithium battery which provides an autonomy of 15 hours.

Connection between the two units and distance of use
When the Parental Unit and the Baby Unit are switched on, the connection is automatic and both units are immediately paired.
Range
walls50 m inside and 300 m outside – range inside depends on the thickness of the *adaptor only available for the EU version

INSTALLATION AND CONFIGURATION OF THE BABY MONITOR

The Parental Unit and the Baby Unit are paired by default. If for any reason the two units no longer communicate, it is possible to re-pair them by following the steps below.

• Turn off the Parental Unit and the Baby Unit
• Press and hold the ON/OFF button on the Baby Unit, release when the green light indicator flashes.
• Press and hold the ON/OFF button on the Parental Unit, release when the light indicated on the Baby Unit stops flashing.

How to pair a second Parental Unit to a Baby Unit?

• Turn the Baby Unit off and the second Parental Unit off
• Press and hold the ON/OFF button on the Baby Unit, release when the green light goes from flashing quickly to flashing slowly.
• Press and hold the ON/OFF button on the Parental Unit, release when the light indicator on the Baby Units stops flashing.

PARENTAL UNIT MENU
Use of the PARENTAL UNIT function buttons

Parental Unit functions

• Night mode – 0 waves: once activated, it cuts all wave emissions when the Baby Unit does not detect noise. In «night» mode the signal loss alarm does not work. The night mode is activated when the light indicator on the Parental Unit is orange
• WALKIE-TALKIE FUNCTION: press and hold this button to communicate with the Baby Unit. The Baby Unit volume can be adjusted by using the +/- buttons while holding the talk back button
• Night-light function: the night light can be turned off and on from the Parental Unit (quick press on the ON/OFF button) or from the Baby Unit (3 quick presses on the ON/OFF button). When the night light is on, the light indicator on the Parental Unit is stronger.

• Function Vox – 2 available modes: Adiust the sensitivity of the VOX mode according to your needs. The 2 available modes regulate the sensitivity of the VOX (50-60 dB) to adapt it to the baby’s environment. In a very calm environment, favor the Hi (H) setting, if the Baby Unit emits background noises when the baby sleeps, use the Low (L) setting
• Parental Unit ‘find’ function: when the BABY Unit is turned on, briefly press the ON/OFF button once to make the PARENTAL Unit ring (the PARENTAL Unit must also be tumed on)
• Volume control: use the +/- buttons to adiust the volume of the Parental Unit. On the minimum level the Parental Unit will be on silent mode: the light-emitting diodes show the intensity of the detected sounds.
• Out-of-range alert: the BABY Unit is switched off or if the PARENTAL Unit is out of range, the PARENTAL Unit will beep every two seconds.
• This mode is not active in night mode Low battery alert: when the battery is nearly flat, the Parental Unit will beep every 30 seconds and the warning light will be red.

CLEANING AND MAINTENANCE

Warning
Never use chemical detergent, sprays or liquid detergent.

• Before cleaning, all the adaptors must be unplugged
• Hands must be dry before inserting or replacing the battery
• Clean the Baby Audio Monitor with a damp cloth only.

ENVIRONMENT AND RECYCLING

• This appliance has been designed and made with materials and components of high quality such as Lithium batteries which are recyclable and reusable.
• Do not throw this product away with ordinary household waste. Enquire about the rules in effect in your region concerning the selective collection of electric and electronic appliances Take this product to a collection point for the recycling of electrical and electronic appliances

GUARANTEE
The ZEN+ Baby Video Monitor from BEABA is guaranteed for 24 months from the date of purchase. During this period, we guarantee that any defects resulting from materials or construction will be repaired free of charge. This guarantee is submitted for final evaluation from the importer. If you need assistance or further information, please consult the Baba Website or contact the Beaba Consumer Services. If you find a defect, first consult the instruction manual.

• Failing a clear response in the instruction manual, contact the supplier of the Baby Audio Monitor via the website www.beaba.com.

INVALIDITY OF THE GUARANTEE

• In the case of inappropriate use, plugging in error and/or bad positioning of the battery, use of non-original parts or accessories, negligence as well as defects caused by humidity, fire, flood, lightening or natural catastrophes;
• In the case of modifications and/or repairs carried out by non-authorized third parties;
• In the case of inappropriate transport without adequate packaging as well as in the case of the absence of the present guarantee card and proof of purchase.
• The guarantee does not cover connecting cables, plugs and batteries. All other responsibility, notably in terms of indirect damage is excluded.

TECHNICAL CHARACTERISTICS:

Parental Unit

• Battery: 3.7V / 750mA
• USB micro port for Baby Unit (5V DC) Baby Unit
• Wireless connection with 2.4 Ghz frequency
• USB micro port for Baby Unit (5V DC)
• Adaptor Only available for the European version

PROBLEM-SOLVING – TROUBLESHOOTING – FAQ

The status LED does not light up

• Make sure that both units are switched on.
• Check the connection of the mains adapter to the wall power socket and the unit.
• Exchange the batteries and/or check the polarity The status LED flashes green
• The parent unit receives sounds. Turn up the volume on the parent unit to make sure that you hear the sounds from your baby. The status LED flashes red
• Long flashin: Batteries are flat. Replace the batteries or connect the unit to the power supply.
• Short flashing: the maximum range is exceeded. Reduce the distance between the baby and the parent unit. No sound transmission despite the established connection
• The volume is set too low. Press the + button to increase the volume.

EU DECLARATION OF CONFORMITY

We,:

• Business Name: BEABA
• Address: 37 rue de Liege, 75008 PARIS
• Country: FRANCE declare under our sole responsibility for the equipment:
• Equipment name: Simply Zen
• Model or type: Simply Zen – 930325 – 930326

Object:

To which this declaration relates is in conformity with the following harmonized standards
EN 300 328 V2.2.2 (2019-07) // EN 301 489-1 V2.2.3 (2019-11) // EN 301 489-17 V3.1.1 (2017-02)

• EN 55032: 2015
• EN 55035: 2017
• EN 50663: 2017
• EN 62368-1:2014 + A11:2017
• EN S5032:2015+A11:2020
• EN 55035: 2017
• EN61000-3-2:2019
• EN61000-3-3:20134A1:2019

Following the provisions of

• Directive 2014/53/EU
• EMC Directive 2014/30/EU
• Place and date of issue (of this DoC): Bellignat, 13th October 2020
• Name: Alicia Ganeval
• Function: Product Certification Manager

BEABA

• 21 rue du Mouin
• 6$100 BELLIGNAT
• Tel : 04 74 12 09 10 – Fax: 04 74 12 09 11
• ACS # 352 684 377 – Code NPE S18M
• Code TVA FR 30 352 65

www.beoba.com. 37, Run de Lage – 75000 PIRK. – france – M4 +13804 74 10 09 10 / Rax +33 /84 74 12 06 10 SAS ou coprol de 2 058 750 -€ – SPEN: B 352 604 377 RAJ5 – Code TWA FRO5 352 484 377

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>