INFINITY Palisade Pro 4D Massage Chair User Guide
- September 3, 2024
- Infinity
Table of Contents
INFINITY Palisade Pro 4D Massage Chair
In-Use Screen
After a Massage program is selected, you will be taken to the Body Scanning
screen. Here you can use the arrows to adjust the back
mechanism up and down to match your specific shoulder height. After the
countdown timer has elapsed, your massage will start.
- Zero Gravity Recline
- Speakers Active
- Active Airbags
- Active Rollers
- Indicators
- Time Remaining
- Back Roller Position
- Main Menu Navigation
After adjusting your shoulder height, you will be taken to the In-use screen where you can observe all current settings and session information. To personalize your massage to your exact needs, swipe left on the touch screen to be taken to the Custom Selections screen.
The Custom Selections screen can be used to tailor your message exactly to
your needs. Here you will have complete control over the duration, airbag
settings/intensity, foot rollers, and back/leg heat.
To return to the In-use screen, simply swipe right or tap the arrow on the
Tablet Remote screen, which will take you to the home page, and then tap
‘massage running screen’ at the top center of your screen. If you slide on
the Control Panel Lock (top right corner of screen), this screen will not
revert back to the In-Use screen so you can make continuous adjustments. Slide
off to unlock again.
My Massage™ Memory
Your chair has the ability to save your favorite customized massage programs to memory. To do this, create a manual massage program (see page 19 of User Manual for instructions) with all of your desired air, heat, speed, and intensity settings.
Storing a memory program:
After creating your custom massage in manual mode, select AUTO from the Home display and scroll to the bottom of the page. Here you will see My Massage 1 and My Massage 2. Press OK button to select either 1 or 2 then select “Save”. If you save over the top of an existing memory program, the existing program will be erased and replaced by the most recent save.
Loading a memory program
Select AUTO from Home display and scroll to the bottom of the page. Select
My Massage 1 or
My Massage 2 and then select “Run”. The chair will now run the program
you created.
Product Description
Infinity Control – Have a particular spot that needs more work? Take the power of massage into your own hands with Infinity Control. Use this screen to fully customize your own massage and find the perfect treatment for you.
If you slide on the Control Panel Lock (top right corner of screen), this screen will not revert back to the In-Use screen so you can make continuous adjustments. Slide off to unlock again.
After you have set up the perfect selections you can tap MyMemory and Save the program to 1 of 3 Memory slots for recall later.
Technique – controls the massage technique of the back mechanism.
Focus Zone – controls the range of motion of the back mechanism, Whole travels the entire length of the track, Partial travels a short distance and reverses direction for focused relief, Point stops on the track for targeted relief.
Adjust – Partial and Point location can be fine tuned using the arrow up or arrow down buttons.
Width – increase or decrease width of back mechanism. (Width can’t be adjusted when in Kneading, or Sync modes).
Maximum 4D level – increase or decrease intensity of 4D back mechanism.
Speed – increase or decrease speed of back mechanism (massage speed can’t be adjusted when in Shiatsu Manual mode).
Air Settings – select your desired airbag region
Max Air Intensity – set the maximum airbag intensity for your desired airbag settings.
Back Heat – turn on back heat and control intensity.
Foot Rollers & Oscillation – turn on total sole foot reflexology rollers and calf rollers and control the speed.
CUSTOMER SUPPORT
Alternatively, scan the QR code to watch a remote tutorial video.
Share a photo
and tag us
72 Stard Road, Seabrook, NH 03874 |
603-910-5000
www.infinitymassagechairs.com
@infinity_chairs
@Infinitymassagechairs
@Infinitymassagechairs