HORIZON 30 Inch Tug Boat Owner’s Manual
- October 30, 2023
- Horizon
Table of Contents
HORIZON 30 Inch Tug Boat
Horizon Harbor Optional Cannon Pump
The Horizon Harbor Optional Cannon Pump is a water pump that can be
installed into the hull of your boat to create a water cannon feature. The
installation process is simple and can be done using the existing mount in the
hull.
Installation Instructions
- Remove the water inlet cap from the water pickup silicone tube.
- Place the water pump and bracket into the hull, lining up the two screw holes inside with the motor facing forward.
- Tighten the two screws that hold the water pump in place, and install the rear-facing silicone line to the water pickup.
- Plug the long main cabin waterline into the outlet on the left side of the pump.
- Attach the water pump controller to the side of the ballast box using the included double-sided foam tape.
- Plug the controller servo wire into the 2-in-1 receiver/ESC third channel port.
- Install the Y power harness into the ESC power wires. This powers the boat and water pump from your selected battery.
Usage Instructions
To operate the water pump, press the CH 3 button on the transmitter. The pump will shut off when you release the button.
Optional Water Cannon Pump
Use the existing mount to install the water cannon pump into the hull.
-
Remove the water inlet cap from the water pickup silicone tube.
-
Place the water pump and bracket into the hull, lining up the two screw holes inside with the motor facing forward.
-
Tighten the two screws that hold the water pump in place, and install the rear facing silicone line to the water pickup.
-
Plug the long main cabin waterline into the outlet on the left side of the pump.
To operate the water pump, press the CH 3 button on the transmitter. The pump shuts off when you release the button.
-
Attach the water pump controller to the side of the ballast box using the included double-sided foam tape.
-
Plug the controller servo wire into the 2-in-1 receiver/ESC third channel port.
-
Install the Y power harness into the ESC power wires. This powers the boat and water pump from your selected battery.
63675 | Created: 03/2020 | PRB380001 ©2020 Horizon Hobby, LLC. Pro Boat, the Pro Boat logo, Horizon Harbor, and the Horizon Hobby logo are trademarks or registered trademarks of Horizon Hobby, LLC. All other trademarks, service marks and logos are property of their respective owners.