Beurer HS100 Hair Straightener Instruction Manual

: June 1, 2024
: Beurer

Table of Contents

Beurer HS100 Hair Straightener
Product Information
Product Usage Instructions
Included in delivery
IMPORTANT SAFETY NOTES
SIGNS AND SYMBOLS
DEVICE DESCRIPTION
USAGE
CLEANING AND MAINTENANCE
DISPOSAL
TECHNICAL DATA
WARRANTY
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Beurer HS100 Hair Straightener

Beurer-HS100-Hair-Straightener-Product

Product Information

Specifications:

Weight: Approximately 425 g
Protection Class: II
Power Supply: 220-240 V~, 50-60 Hz
Power Consumption: 45W

Product Usage Instructions

Important Safety Notes
Do not use the device near bathtubs, shower trays, or containers with water. Follow all safety instructions provided.
Signs and Symbols
Refer to the symbols used on the device, in the instructions, packaging, and type plate for guidance.
Device Description
- Coated hot plates
- Ion outlet
- LED display
- ON/OFF button
- Temperature switch
- Plate locking system
- Mains cable
- Button lock button
Usage
Ensure the device is only held by the handle when switched on.
Avoid direct contact with the hot plates.
Position on a dry surface with dry hands.
Clean and prepare hair before use.
Open the device using the plate locking system.
Switch on the device and set the desired temperature using the temperature switch.
The device has an automatic switch-off function after 30 minutes for safety. Activate the button lock to prevent accidental shutdown.
Cleaning and Maintenance
Follow the cleaning instructions provided in the manual to maintain the device’s performance and longevity.
Disposal
Properly dispose of the device following local regulations and guidelines.
Technical Data
Refer to the specifications mentioned above for technical details of the product.
Warrants
Refer to the warranty information provided for details on coverage and terms.

FAQ (Frequently Asked Questions)

Q: How do I activate the button lock feature?
A: Press and hold the button lock button for 2 seconds until indicated on the LED display to activate it.
Q: How do I know when the device switches off automatically?
A: The device will automatically switch off after 30 minutes for safety reasons.

Read these instructions for use carefully. Observe the warnings and safety notes. Keep these instructions for use for future reference. Make the instruc- tions for use accessible to other users. If the device is passed on, provide the in-structions for use to the next user as well.

Included in delivery

Check that the exterior of the cardboard delivery packaging is intact and make sure that all contents are present. Before use, ensure that there is no visible damage to the device or acces-sories and that all packaging material has been removed. If you have any doubts, do not use the device and contact your retailer or the speciﬁed Customer Service address

1 Hair straightener
1 storage box
1 set of these instructions for use

IMPORTANT SAFETY NOTES

The device must be used for the purpose for which it was designed and in the manner speciﬁed in these instructions for use. Any form of improper use can be dangerous.
This device may be used by children over the age of 8 and by people with reduced physical, sensory or mental skills or a lack of experience or knowl-edge, provided that they are supervised or have been instructed on how to use the device safely, and are fully aware of the consequent risks of use.
Children must not play with the device.
The danger of suffocation! Keep packaging materials away from children.
Cleaning and user maintenance must not be performed by children unless supervised.
Do not use this device near bathtubs, shower trays or other containers which have water in them.
Risk of electric shock! Never submerge the device in water or other liquids. If the device falls into the water, do not reach into the water! First, switch off the fuse at the fuse box and then pull the mains plug out of the socket.
When using the device in the bathroom, unplug the plug after use as water in the vicinity constitutes a danger, even when the device is switched off.
As an additional safety measure, the installation in the bathroom circuit of a residual current device (FI/RCD) with a rated tripping current not exceeding 30 mA is recommended. Ask your installer for advice.
If the mains connection cable of this device is damaged, it must be replaced by the manufacturer, its customer service department or a similarly qualiﬁed person to avoid any risk. Do not use the device if it is damaged or not functioning correctly.
This device is not designed for use in commercial areas.
Do not pull, twist or bend the mains cable 9! Untangle the mains cable 9 if it is twisted. Do not wind the mains cable 9 around the device!
Under no circumstances should you open or repair the device your seas The correct functioning of the device can no longer be guaranteed should you do so. Failure to observe this will invalidate the warranty.
The Hair straightener must only be used for private use to straighten and style your hair.

SIGNS AND SYMBOLS

The following symbols are used on the device, in these instructions for use, on the packaging and the type plate for the device:

Beurer-HS100-Hair-Straightener-Fig-2

DEVICE DESCRIPTION

The associated drawings

Coated hot plates
Ion outlet
LED display
ON/OFF button
Button lock button
Temperature switch
Plate locking system
360° swivel joint with anti-kink protection
Mains cable

Beurer-HS100-Hair-Straightener-Fig-1

USAGE

Risk of burns and fire!
The device becomes very hot. When the device is switched on, it must only be held using the handle. Do not touch the coated hot plates 1 . Do not clamp objects between the coated hot plates 1.

Position yourself on a dry, non-conductive surface. Make sure that your hands are dry!
Hair should be clean and free from styling products. The exception to this is special products designed to help straight-en hair.
Comb your hair with a large-toothed comb to get rid of any tangles.
Open the device using the plate locking system 7.
Brieﬂy holds down the ON/OFF button 4 to switch on the device.
Use the temperature switch 6 to set your desired temperature. The current set temperature setting is shown in the LED display 3. You can use the temperature switch 6 to increase or decrease the temperature in 10°C increments. We recom-mend the following temperature settings:
120 °C to 140 °C for fine, brittle, coloured or bleached

hair

160 °C to 180 °C for normal hair
200 °C to 220 °C for thick and resistant hair
7. The LED display 3 ﬂashes during the heat-up phase. As soon as the device is heated up, an acoustic signal sounds and the LED display 3 lights up continuously. The device is now ready for use. 8. Part the hair into individual sections of approximately 3 to 4 cm. 9. Place the individual sections between the coated hot plates 1 close to the root. 10. Slowly move the device from the roots to the tips in a ﬂuid motion. Never hold the device in one place for more than two seconds. This will achieve the best results without subjecting your hair to excess stress or damage. 11. To shape the tips, turn the device outwards or inwards before moving it over the tips. 12. Press the ON/OFF button 4 to switch off the device. Place the device on a non-ﬂammable surface. 13. After each use, pull the mains plug out of the socket. Leave the device to completely cool down. 14. Store the device in a dry place out of the reach of children. The fully cooled device can be stored and transported in a heat-resistant storage box.

Note
The device has an automatic switch-off function and switches off automatically after 30 minutes for safety reasons.

Note
The device has a button lock so that the device does not switch off if you press the ON/OFF button 4 unintentionally during use.

To activate the button lock, press and hold the button lock button 5 for 2 seconds. The LED display 3 shows .
To deactivate the button lock, press and hold the button lock button 5 for 2 seconds. The LED display 3 no longer shows .

CLEANING AND MAINTENANCE

Risk of electric shock! Always pull the mains plug out of the socket before cleaning the device. Make sure that the device has cooled down completely.
Only clean the housing of the device and the coated hot plates 1 with a soft cloth dampened with warm water. Ensure that no water gets inside the device.
Protect the device from dust, dirt and humidity.
Risk of ﬁre! Do not clean the device with highly ﬂammable liquids.
Do not clean the device in the dishwasher. Do not use any aggressive, caustic, abrasive or corrosive cleaning products or hard brushes.

DISPOSAL

For environmental reasons, do not dispose of the de-vice in the household waste at the end of its service life. Dispose of the device at a suitable collection point in your country. Observe the local regulations for material disposal. Dispose of the device by EC Directive – WEEE (Waste Electrical and Electronic Equipment). If you have any questions, please contact the local authorities responsible for waste disposal. You can obtain the location of collection points for old devices from the local or municipal authorities, local waste disposal company or your dealer, for example.