RICE LAKE 682 Synergy Plus Indicator Configuring Second Generation CPU Boards User Guide
- June 17, 2024
- RICE LAKE
Table of Contents
RICE LAKE 682 Synergy Plus Indicator Configuring Second-Generation CPU
Boards
Product Information
The 682 Synergy Plus Indicator is a weighing scale indicator manufactured by Rice Lake Weighing Systems. It is designed to display weight measurements accurately and efficiently. The indicator features second-generation CPU boards that require configuring through the installation of jumper wires for 4-wire load cell connections.
Specifications
- Model : 682 Synergy Plus Indicator
- Manufacturer : Rice Lake Weighing Systems
- Generation : Second Generation
- Configuration Method: Jumper wires
Product Usage Instructions
Configuring Second-Generation CPU Boards
To configure a second-generation CPU board for a 4-wire connection, follow these steps:
- Locate the revision sticker on the CPU board. It is typically found near the Mac Address Label and the Option Card.
- Identify the generation of the CPU board using Table 1.
- If it is determined that the CPU board is a second-generation board, proceed to the next step.
- Install a jumper wire between Exc+ and Sen+ on the CPU board.
- Install another jumper wire between Exc- and Sen- on the CPU board.
Table 1: Generation Identification
| Generation | Revision Configuration Method |
|---|---|
| First Generation | Menu configuration |
| Second Generation | Jumper wires |
Obtaining Manuals and Warranty Information
For detailed manuals and warranty information, visit the Rice Lake Weighing Systems website:
- Manuals: www.ricelake.com/manuals
- Warranty Information: www.ricelake.com/warranties
FAQ
- Q: How can I identify the generation of my CPU board?
- A: You can identify the generation of your CPU board by locating the revision sticker on the board. Refer to Figure 1 and Table 1 for more information.
- Q: What should I do if the scale does not display weight due to a reference error with the 4-wire load cell connection?
- A: If you encounter this issue, follow the solution provided in the user manual. Install jumper wires for the 4-wire load cell connection as described in the product usage instructions section.
Configuring Second-Generation CPU Boards
issue : The scale will not display weight due to a reference error with a
4-wire load cell connection
Solution : Install jumper wires for 4-wire load cell connection
First-generation CPU boards have sense switches and are configured through the
indicator menu while the second generation does not have sense switches and
requires installing jumper wires in 4-wire configuration to avoid errors.
Manuals are available from Rice Lake Weighing Systems at
www.ricelake.com/manuals
Warranty information is available at
www.ricelake.com/warranties
Locate the revision sticker on the CPU board as shown in Figure 1.
See Table 1 to identify the CPU board generation.
IMPORTANT: To configure a second-generation CPU board for a 4-wire connection, install a jumper wire between Exc+ and Sen+ and another jumper wire between Exc- and Sen-.
- © Rice Lake Weighing Systems
- Content is subject to change without notice
- 230 W. Coleman St.
- Rice Lake, WI 54868
- USA USA : 800-472-6703
- International: +1-715-234-9171
- www.ricelake.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>