BURTON SAFE Companion Fingerprint Safe Instructions
- June 12, 2024
- BURTON SAFE
Table of Contents
BURTON SAFE Companion Fingerprint
Product Information
The COMPANION Fingerprint Safe is a secure storage solution for your valuables. It comes with a USB-C cable, bolts, and a backup battery case. The safe features a fingerprint sensor and a keypad for access. It has a storage grid and partition for organization. The safe also has an internal button and LED for easy operation.
Specifications
- Type: Fingerprint Safe
- Fingerprint Capacity: 50
- Password Capacity: 50
- Power: 4 x AA Batteries (not included
THE IDEAL COMPANION SAFE
- Access the safe using a fingerprint or PIN code
- Up to 50 fingerprints and PIN codes can be programmed
- User programable 6 digit PIN code
- Anti-bump motorised locking bolts
- Faux leather lined door in grey
- Faux-leather lined with diamond stiching
- Comes with a fixed height shelf
- Low battery warning
- Emergency opening using a USB-C cable
- Features an internal LED, key hooks and a document holder
- Back and base fixing
Diagram Of Companion – Fingerprint Safe
Thank you for purchasing a Burton Safe
Unboxing
The safe is under factory setting, put your finger on the sensor or enter
123456 then press #, you will hear “Under factory setting, open”, the door
will be opened, then put your finger on the sensor, you will hear “Closed”,
the door will be closed.
WARNING
- Please add your password and fingerprint as soon as possible when you get your new safe.
- Always test your new code or fingerprint with the door in the open position.
Fingerprint Or Password Registration
- Opening the door, press the internal button, you will hear “Please put your finger on scan sensor or enter your user code”.
- Enter your 6 digits password
- Press # or put your finger on scanner，you will hear “Please do again”, do the operation and follow the prompt voice, finally you will hear “Registration complete”.
Note: Opening the door and press the button within 15 seconds, otherwise you will hear Operation Failed. Note: Only one fingerprint or one password can be set at a time, the safe can store 50 fingerprints and passwords in total.
-
Open The Door
Placing your registered finger on the sensor or enter your password then press #, you will hear Verification complete, the door will be opened. -
Close The Door
Put your finger on the sensor or press # you will hear Closed, the door will be closed. -
Reset
Opening the door, press the internal button within 15 seconds and hold on for 8 seconds, you will hear Di, release your finger, you will hear reset complete. -
Voice On/Off
Entering 6665554 and press #, the voice will be shut off, then when you touch the keypad, there will be a flash on the numbers. Enter 6665554 and press # again, you will hear Operation complete, voice will now be set to on. -
Battery Low
When you open the door, if you hear battery low, please replace the batteries asap. If the battery is low and you cannot open the door, please use a power bank or mobile charger to power on the safe through the Type-C port. Please change your battery every year.
WARNING: Please change your battery every year.
Warranty
Your new product carries a parts and labour 2 year warranty in respect of defects in materials and workmanship. In order to register your warranty you will need the serial number from your product, this can be found on the product itself. You can activate your warranty by visiting our website. www.burtonsafes.co.uk/warranty
www.burtonsafes.co.uk | +44 (0) 1484 663388 | enquiries@burtonsecurity.com Brockholes Business Park, Rock Mill Road, Holmfirth, HD9 7BN