SPORTOP FS3550 Twister Stepper User Manual
- October 30, 2023
- SPORTOP
Table of Contents
SPORTOP FS3550 Twister Stepper
HOW TO REPLACE BATTERY
- Step1. To pull up the meter(A29) from the housing of front side cover(A31 )& rear side cover(A32).
- Step2. Take out the battery from the meter and put the new one into the meter(A29). |
- Step3. Pay attention to the positive/negative pole of the battery while assembling the new battery.
- Step4. Equip the meter(A29) onto the housing of front side cover(A31 )& rear cover(A32).
P .S. There is no exact positive or negative side of this model, so the console position can be changed according to your body e)<ercise direction. FUNCTIONS
FUNCTIONS
- TIME 0:00 – 99:59
- COUNT 0 -9999
- STRIDES/MIN 0 – 480
- CALORIES 0 9999
DESCRIPTION
AUTO ON/OFF
- The system turns on when any key is pressed, any signal input, or starting to exercise.
- Without any signal for 6 seconds The LCD display will shows “STOP”.
- Without any signal for 4 minutes, The LCD will off automatically.
SCAN
- Scan automatically through each function in sequence so that you can monitor your progress without pressing the SELECT button.
- When the exercise computer during SCAN function the LCD display will show ” ◄ “
- Display repeatedly as the following order: STRIDES/MIN-TIME-CAL
BATTERIES
- BUM4 “AAA” battery one piece.
- Replace the batteries through the backside of the unit.
KEY FUNCTIONS
MODE
- Press SCAN or LOCK to stop repeatedly displaying functions. Tei press MODE to fix the function which you have chosen. The pointer will show what function is displayed.
- Press the MODE key once the pointer stops blinking and lo,ck on the function which you have chosen
NOTE
- Do not expose to sunlight for a long time.
- To avoid wet, humid o,r moist, to avoid any impact intensely.
MODEL: FS3550
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>