SPORTOP B800P Plus Home Trainer Instruction Manual
- October 30, 2023
- SPORTOP
Table of Contents
SPORTOP B800P Plus Home Trainer
PARTS LIST
ASSEMBLY
BUTTON FUNCTION
OPERATING PROCEDURE
-
POWER ON
When power on, the buzzer sound for a second. At the same time, LCD full display 2 seconds and then the wheel diameter. After that, enter into normal training mode to select. -
USER PROFILE SETTING
When selecting USER Ul—U4, SEX will flash to be set. Press UP or DOWN to choose and ENTER to confirm Press ENTER again , AGE/HEIGHT/WEIGHT will display in tum. Press UP or DOWN button to choose a value. (Note: If press UP or DOWN key for I .5s, the value will increase/decrease 8 levels.) -
SELECT TRAINING MODE
When enter into training mode, Press UP or DOWN to choose: the program—+ Press ENTER/MODE to enter the mode. If press START without selection, directly enter into MANUAL MODE and start. -
WORKOUT SELECTING
-
MANUAL MODE In START mode, the user can press UP or DOWN button to adjust the LOAD level. And LOAD will be displayed in the window, no press for 3s, it quit to WATT. Press UP or DOWN button one time, the value will increase/decrease
-
PROGRAM MODE In PROGRAM mode, user could press UP or DOWN button to choose Programl—Program12. After select the program, the LOAD window will flash in the window. No press for 3s, it quit to WATT. Choose the LOAD level by pressing UP or DOWN button(UP to max. 16, DOWN to min. I
-
User Program User can press UP or DC)VVNT button to create a personal program profile with 20 segments and confinn by pressing ENTER. When coming to the 9d1 step, it scroll and shift to left and so on. Then press START/ STOP to start the exercise. To pause the workout halfway, hold ENTER for 2s. The unset timer shift will save last time value.
-
H.R.C. MODE In H.R.C mode, need set age first and confinn by ENTER. It will display the preset value in the PULSE area according to age. If select TARGET, it will display 100 and flash in PULSE area. Use UP and DOWN button to adjust the target value and it can be circulated.
-
WATT MODE When entering, the WATT value is flashing to be set(preset value=120). User press UP or DOWN to set WATT value. After Starting, it will adjust automatically according to the WATT value user inserted and exercise status.
-
RECOVERY MODE
After exercising for a period of time, keep holding on handgrips and press the “RECOVERY” button. All fiction displays will stop except “TIME” which will start counting down from 00:60 to 00:00. Screen will display your heart rate recovery status with the Fl, F2….to F6.Fl is the best, F6 is the worst.
Remarks:
- During MANUAL mode, user can press UP and DOWN buttons to adjust the TIMEDISTANCE/ CALORIES/PULSE value.
- In PROGRAWUser ProgrmwH.R.C]WATT mode, user can only set TIME value.
- Every time press UP or DOWN button, the value will increase/decrease I level; If hold for I .5s, the value will inclease/declease 8 levels per second and stop when releasing.
- No signal(SENSOR, KEYBOARD, PULSE value display) input over 4 minutes, system will enter SLEEP MODE. All set and calculated value will be saved. When power on and start next time, it will go on with the calculated value.
- LCD display E-2: Inspect the console and connecting cable for peeling off and poor contact.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>