spokeo Smart Mic Wireless Headset User Guide

spokeo Smart Mic Wireless Headset

PARTS AND CONTROLS

Sound Boost (headset)

1. Power indicator LED light

2. Reset button

3. Bluetooth /Microphone mode switch

4. ON/OFF switch – Volume OFF/1/2 switch

5. Microphone magnetic charging pogo pin socket female

6. Type C USB charging port

7. 3.5 mm Jack line audio input

8. Charging indicator LED light
   Smart Mic (microphone)

9. ON/OFF switch

10. Microphone LED light indicator

11. Microphone magnetic charging pogo pin male

12. Microphone sound input

13. Clip

INITIAL USE OF SPOKEO

Initial charge :

Spokeo Smart Mic (microphone) and Spokeo Sound Boost (headset) have been engineered to be charged together seamlessly.

• First, attach Smart Mic to Sound Boost’s pogo pin socket. (see 5 and 11 on page 2)
• Once properly inserted, plug the USB C cable to the headset charging port and to a power source on the other end (wall charger blocks or any other power source). (see 6 on page 2)
• While charging, a red indicator light will be visible, which will turn green once fully charged. (see 8 on page 2)
• Perform a full charging cycle before initial use for both Smart Mic (microphone) and Sound Boost (headset).

Using Spokeo in microphone mode  3 easy steps

• Powering ON Smart Mic (microphone)
  Press and hold the orange button for 3 seconds until the blue LED light turns on. (see 9 on page 2).

• Switching the headset to microphone mode
  Slide the headset’s orange button to the microphone setting (see 3 on page 2).

• Powering ON Sound Boost (headset)
  Slide the black button from OFF to the desired volume preset 1 or 2. (see 4 on page 2).
  Once powered ON, Sound Boost notifies Power ON and  System connected once connected to the Smart Mic.

Using Spokeo in Bluetooth mode 3 easy steps

• Switching the headset to Bluetooth mode
  Slide the headset’s orange button to the Bluetooth setting (see 3 on page 2).

• Powering ON Sound Boost (headset)
  Slide the black button from OFF to the desired volume preset 1 or 2. (see 10 on page 2). Once powered ON, Sound Boost  notifies Power ON.

• Connecting to an external device:
  Turn on Bluetooth on the external device and search for new device to connect to. Select «Spokeo» from the list of available devices and press “Pair”. Once connected to the external Bluetooth device, Sound Boost (headset) notifies System connected

Customer Support

If you require additional assistance, please visit our dedicated troubleshooting page at : myspokeo.com/pages/sav.

www.myspokeo.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>