GOLDEN LIGHTING 3124-BA2 Clemence 2 Light Dark Rust Vanity Light Installation Guide
- June 10, 2024
- GOLDEN LIGHTING
Table of Contents
GOLDEN LIGHTING 3124-BA2 Clemence 2 Light Dark Rust Vanity Light
Product Information
The Golden Lighting product provides lighting solutions for various spaces like kitchen islands, dining rooms, and open areas. The product includes pendants, linear pendants, and chandeliers that can be coordinated with other fixtures like sconces and flush mounts to create layered lighting. The product can be installed with dimmers to control the level of light output. The product arrives assembled and ready for installation.
Product Usage Instructions
Pendants & Linear Pendants Above a Kitchen Island
To center a linear pendant over the island or to hang pendants, use one
pendant for every 24 inches of the island. The fixtures should hang at least
30 inches above the countertop.
Pendants & Chandeliers Above a Dining Room Table
Fixtures should stay at least 30 inches above the table. Use a fixture that
is 12 inches narrower than the width of the table.
Pendants and Chandeliers in Open Areas
The bottom of the fixture should hang at least 7.5 feet from the floor.
Allow clearance for any opening doors. Before installation, identify the
fixture’s wires as per the instructions given in the manual. Connect the wires
as per the instructions. Once connected, finish the installation. Remember to
contact the place of purchase for replacement parts if needed. To get help,
quick tips, and explore curated content, visit
GoldenLighting.com. Follow Golden Lighting on
social media to share pictures of your new light.
Thank You for Choosing Golden Lighting for Your Lighting Needs!
Dimensions
Pendants & Linear Pendants Above a Kitchen Island
Center a linear pendant over the island. If hanging pendants, use one pendant
for every 24″ of island. Fixtures should hang at least 30″ above the
countertop.
Pendants & Chandeliers Above a Dining Room Table
Fixtures should stay at least 30″ above the table. Use a fixture that is 12″
narrower than the width of the table.
Pendants and Chandeliers in Open Areas
The bottom should hang at least 7.5 feet from the floor. Allow clearance for
any opening doors.
We appreciate your business and hope you love your new light!
Great lighting can add value and enhance the look of your home. To ensure the
best lighting in your space, remember to layer your lighting. This ensures
that your space will have both task and ambient lighting. Coordinating
fixtures like sconces, flush mounts, and pendants can help you meet your
layered lighting needs and reinforce your desired aesthetic. Install the
lights with dimmers that allow you to control the level of light output at any
given moment.
Get function and style! Browse our site for coordinating lights and expert
lighting advice. To help create the perfect look, visit
www.GoldenLighting.com.
Love your light and want to show it off?
Follow us, share a picture, and tag us on Social…
Wiring
How to Identify the Fixture’s Wires
- ThreadHot: Smooth, Black, or Transparent with Black Inner Thread
- WiresNeutral: Ribbed, White or Transparent with White Inner Thread
- Ground: Copper, Bare Metal, Green, or Transparent Inner Thread
Assembly Instructions
Get help, quick tips, and explore curated content
For Customer Service, contact the place of purchase to arrange for replacement parts.
IMPORTANT:
- All installation work should be done by accredited professional.
- Shut off power supply at fuse or circuit breaker!
- Use only the specified bulbs. Do not exceed the maximum wattage!
PREPARING FOR INSTALLATION
Carefully remove the new fixture from the carton as well as the yellow bag that holds all of the parts. See the important notes above. Shut off power at the circuit breaker and remove old fixture from wall, including the old mounting strap. THIS FIXTURE CAN BE INSTALLED ON THE WALL OR CEILING. PLEASE REVIEW THESE INSTRUCTIONS FULYLY BEFORE PROCEEDING. 1. Mounting strap (A) may be attached to backplate (F). If the mounting strap is attached, remove small screws (B) to detach. Mounting strap (A) contains several pairs of threaded holes. Find the pair of holes that matches the spacing of the holes on the junction box and your fixture’s backplate. Test backplate (F) on mounting strap (A) to ensure that the backplate will hang straight. Place the fixture aside for future use. 2. Pull the house wires through the center of mounting strap (A). Place mounting strap (A) over the junction box so that mounting screws (D) may be inserted. Secure mounting strap (A) to the junction box with mounting screws (D) and a screwdriver. Tighten the screws (D) securely.
ASSEMBLING THE FIXTURE
No Assembly Required – This item arrives assembled and ready for installation.
Please proceed to the next step.
CONNECTING THE WIRES
3. Have an assistant support the fixture’s weight while completing the
wiring. Refer to the wiring diagram and attach the fixture’s wires to the
power supply wires from the junction box. Attach the fixture’s wires to the
power supply wires from the junction box. Connect Hot to Hot (transparent wire
with black inner thread, black, or smooth wire) Neutral to Neutral
(transparent wire with white inner thread, white, or ribbed wire), and Ground
to Ground (transparent wire with green inner thread, green wire, or copper).
Twist the ends of the wire pairs together, and then twist on a wire connector.
Make sure all twists are in the same direction. If there is no house ground
wire coming from the junction box, locate ground screw (E) on the mounting
bracket/mounting strap and wrap the fixture’s ground wire around the ground
screw. Use a screwdriver to tighten the top of ground screw (E) onto the wires
and into the mounting bracket/mounting strap. Tuck the wires into the junction
box.
FINISHING THE INSTALLATION
IF INSTALLING FIXTURE ON THE WALL REFER TO THE DIAGRAM LABELED “(1)”. 4. Place
the fixture’s backplate (F) over mounting strap (A) so that the holes in the
top of mounting strap (A) line up with the holes in backplate (F). Use a
screwdriver to thread screws (B) into backplate (F) until backplate (F) is
snug against the wall. 5. Slide shades (H) over sockets (J) and secure in
place with socket rings (I). Adjust arms by loosening thumbscrews (C) and
positioning the arms to the desired placement. Retighten thumbscrews (C) to
secure arms in place. Install light bulbs (not included) in accordance with
the fixture’s specifications. Do not exceed the maximum recommended wattage.
Your installation is complete. Turn on the power and test the fixture. IF
INSTALLING FIXTURE ON THE CEILING REFER TO THE DIAGRAM LABELED “(2)”. 4. Place
the fixture’s canopy (F) over mounting strap (A) so that the holes in the top
of mounting strap (A) line up with the holes in canopy (F). Use a screwdriver
to thread screws (B) into the holes found on the side of the canopy (F) until
canopy (F) is snug against the ceiling. 5. Slide shades (H) over sockets (J)
and secure in place with socket ring (I). Adjust arms by loosening thumbscrews
(C) and positioning the arms to the desired placement. Retighten thumbscrews
(C) to secure arms in place. Install a light bulb (not included) in accordance
with the fixture’s specifications. Do not exceed the maximum recommended
wattage. Your installation is complete. Turn on the power and test the
fixture.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>