GOLDEN LIGHTING 6080-OWS NB-SD Ezra 1 Light 10 Inch Natural Black Outdoor Wall Light Instruction Manual
- June 10, 2024
- GOLDEN LIGHTING
Table of Contents
6080-OWS NB-SD Ezra 1 Light 10 Inch Natural Black Outdoor Wall Light
Instruction Manual
6080-OWS NB-SD Ezra 1 Light 10 Inch Natural Black Outdoor Wall Light
Pendants & Linear Pendants Above a Kitchen Island
Center a linear pendant over the island. If hanging pendants, use one pendant
for every 24″ of island. Fixtures should hang at least 30″ above the
countertop.| Pendants & Chandeliers Above a Dining Room Table
Fixtures should stay at least 30″ above the table. Use a fixture that is 12″
narrower than the width of the table.| Pendants and Chandeliers in Open
Areas
The bottom should hang at least 7.5 feet from the floor. Allow clearance for
any opening doors.
We appreciate your business and hope you love your new light!
Great lighting can add value and enhance the look of your home. To ensure
the best lighting in your space, remember to layer your lighting. This ensures
that your space will have both task and ambient lighting. Coordinating
fixtures like sconces, flush mounts, and pendants can help you meet your
layered lighting needs and reinforce your desired aesthetic. Install the
lights with dimmers that allow you to control the level of light output at any
given moment.
Get function and style! Browse our site for coordinating lights and expert
lighting advice. To help create the perfect look, visit
www.GoldenLighting.com.
Love your light and want to show it off?
Follow us, share a picture, and tag us on Social…
How to Identify the Fixture’s Wires
Hot: Smooth, Black, or Transparent with Black Inner Thread
Neutral: Ribbed, White or Transparent with White Inner Thread
Ground: Copper, Bare Metal, Green, or Transparent Inner Thread
Get help, quick tips, and explore curated content
Assembly Instructions: 6080-OWS
For Customer Service, contact the place of purchase to arrange for replacement
parts.
IMPORTANT:
- All installation work should be done by accredited professional.
- Shut off power supply at fuse or circuit breaker!
- Use only the specified bulbs. Do not exceed the maximum wattage!
Assembly Instructions
PREPARING FOR INSTALLATION
Carefully remove the new fixture from the carton as well as the yellow bag
that holds all of the parts. See the important notes above. Shut off power at
the circuit breaker and remove old fixture from wall, including the old
mounting strap. 1. Mounting strap (A) may be attached to backplate (F). If the
mounting strap is attached, remove small screws (B) to detach. Mounting strap
(A) contains several pairs of threaded holes. Find the pair of holes that
matches the spacing of the holes on the junction box and your fixture’s
backplate. Test backplate (F) on mounting strap (A) to ensure that the
backplate will hang straight. Place the fixture aside for future use. Pull the
house wires through the center of mounting strap (A). Place mounting strap (A)
over the junction box so that mounting screws (D) may be inserted. Secure
mounting strap (A) to the junction box with mounting screws (D) and a
screwdriver. Tighten the mounting screws (D) securely.
ASSEMBLING THE FIXTURE
No Assembly Required – This item arrives assembled and ready for installation.
Please proceed to the next step.
CONNECTING THE WIRES
Have an assistant support the fixture’s weight while completing the wiring.
Refer to the wiring diagram and attach the fixture’s wires to the power supply
wires from the junction box. Attach the fixture’s wires to the power supply
wires from the junction box. Connect Hot to Hot (transparent wire with black
inner thread, black, or smooth wire) Neutral to Neutral (transparent wire with
white inner thread, white, or ribbed wire), and Ground to Ground (transparent
wire with green inner thread, green wire, or copper). Twist the ends of the
wirpairs together, and then twist on a wire connector. Make sure all twists
are in the same direction. If there is no house ground wire coming from the
junction box, locate ground screw (E) on the mounting bracket/mounting strap
and wrap the fixture’s ground wire around the ground screw. Use a screwdriver
to tighten the top of ground screw (E) onto the wires and into the mounting
bracket/mounting strap. Tuck the wires into the junction box.
FINISHING THE INSTALLATION
Place the fixture’s backplate (F) over mounting strap (A) so that the holes in
the side of mounting strap (A) line up with the holes in backplate (F). Use a
screwdriver to thread screws (B) and waterproof rubber washers into backplate
(F) until backplate (F) is snug against the wall. Install a light bulb (not
included) in accordance with the fixture’s specifications. Do not exceed the
maximum recommended wattage. Put the glass shade (G) into the lamp cup (H) and
tighten the glass to secure. 5. After installing the fixture, apply a silicone
sealant caulking to seal the gap between the enclosure and the mounting
surface. Leave a gap unsealed for drainage of any water that might leak into
the enclosure on the bottom. Turn on the power and test the fixture.
@GoldenLighting
@GLFixtures
@GoldenLighting1
@GoldenLighting