FeelWorld F970 5.5 Inch Full HD Touchscreen Monitor User Manual

: June 3, 2024
: FEELWORLD

F970 5.5 Inch Full HD Touchscreen Monitor

5.5″ Touch screen Monitor

F970 Install and Power Kit

User Manual

Product Overview

Thank you for purchasing our 5.5 inch Full HD touch screen monitor. This monitor has HDMI input and output, auxiliary power output, touch screen menu operation, support user 3D LUT upload, etc. It has small size, simple operation, portable convenience and wide application range. Advanced features include Histogram, Embedded Audio, Focus Assist, False Colors, Over Exposure, Center Marker, Safe Frames, Ratio Marker, Check Field, Image Freeze, Zoom, Anamorphic etc. It is an ideal, portable and lightweight viewfinder and video monitor.

A Sony F970 external install and power kit design is added to the back of the monitor. The external kit can be used to install and install the external equipment, like wireless transmitter, LED light, video converter and others which can be powered by Sony F970 battery. The monitor is equipped with a battery plate; you can use the power adapter supply or use the external battery for power supply.

To insure the best use of the unit, please read the user’s manual carefully

CAUTION

Please avoid the heavy impact and drop onto the ground when move the product.
The screen of this product is made of glass. Please do not drop the screen towards the ground. Keep away from injury if the screen is broken.
Keep the product away from the heat source, and avoid the prolonged exposures to the sun as the LCD screen will be damaged.
To avoid damaging the product, please do not take apart or repair the unit by yourself without the adjustable components in the unit.
In order to better maintain the LCD screen and protect the cover, please follow the following ways to avoid damages.

1. Please refrain from using the hard objects to hit the screen.

2. Please do not force to wipe the screen.

3. Please do not use the chemical solutions to clean the screen.

4. Please do not spray any detergent on the screen.

5. Please do not write on the screen directly.

6. Please do not stick on the screen.

7. Please simply wipe with a clean soft cloth and make sure no water on the screen.

Features

Touch screen menu operation
IPS Full HD 1920×1152 LCD panel
Support 4K HDMI input and output
User custom 3D LUT import by Type-C to USB
All waves
Histogram is a quantitative tool to inspect the image brightness, to guide the exposure control
Focus Assist (Focus edge can be Red, Green, Blue)
Embedded Audio
Zebra and False Color function, convenient to guide the using light when shooting and the post production
Check Field (Red, Green, Blue, Mono)
Image Zoom-in function
Anamorphic Mode
Image Flip (H, V, H/V)
Image Freeze
Image Nine Grid, zoom one of the images to realize the full screen
Pixel to Pixel
Ratio Marker, Safe Frames and Center Marker
Brightness, Contrast, Sharpness, Tint, Saturation and Color Temp Adjustment.
3.5mm earphone output
DC 8.4V power out to power your DSLR camera or mirrorless camera
External sunshade, sunlight readable

1. Product Description

● Front Panel

● Back Panel

1.1 Button Instruction

1.2 Port Instruction (Bottom)

DC OUT 8.4V: DC power output interface, polarity as the output power Barrel output for powering your camera with a separately available DC coupler via adaptor (NP-FW50 Sony&

LP-E6 Canon&DMW-BLF19 Panasonic). More adapters coming soon.

: 3.5mm earphone port output

DC IN 5V (Type-C): Type-C power input. It is recommended to be used for local power supply only. It is not recommended to connect other devices to provide loop-out power.

1.3 Port Instruction (Left)

HDMI IN: V1.4, HDMI signal input, up to 4K@30Hz.

HDMI OUT : V1.4, HDMI signal output, up to 4K@30Hz. DC IN 12V: DC power input, polarity as the input power

1.4 Power Supply Way

(1) The rear cover of the monitor is equipped with a F970 battery plate, which is applicable to F970 series of batteries.

● Sony F970 battery plate for battery of Sony DV: Sony F970 F960 F950 F930 F770 F750 F730 F570 F550F530 series.

It is recommended to use standard original F970 battery. When using battery power supply: two power output interfaces (DCOUT8.4V interface and external install and power kit) can be connected toother device. When powering other device, it is recommended to choose a battery with a larger capacity, so the longer the use time.

Remark: Please take off the battery from the monitor if you don’t use the monitor in a long time.

(2) The left side of the monitor has a DC 12V input power port (5.5mm outer, 2.1mm inner) and supports 7 ~ 24Vwidevoltage. The DC power adapter needs to be purchased separately. When using external adapter input: two power output interfaces (DCOUT8.4V interface and external install and power kit) can be connected to other devices. When powering other equipment, it is recommended to equip at least 3A power adapter.

(3) The bottom of the monitor has a Type-C 5V input power port. This port can be connected to the power bank for power supply and is not used for data transmission; it is recommended to be used only for local power supply, and it is not recommended to connect other devices to provide loop-out power.

1.5 Sony F970 Install and Power Kit

A Sony F970 external install and power kit design is added to the back of the monitor. The external kit can be used to install and install the external equipment, like wireless transmitter, LED light, video converter and others which can be powered by Sony F970battery.

The kit has two cross grooves, you can adjust the position of the external device by loosening 2 screws up and down / left or right, or install the kit upside down. When you don’t need the kit, you can loosen the screws and remove the kit.

Note: Before disassembling the kit, make sure that the monitor is turned off, and then remove the battery or power adapter.

(1) Just move the kit: Loosen 2 screws, and then adjust up / down / left / right.

(2) Remove the external device: After the plug-in device is installed on the kit, if your plug-in device has a locking button, and it is more difficult to press it to remove it by hand, then you can use our assisting tool to disassemble.

(3) Steps to remove the kit:

①. Loosen the 2 screws.

②. Use both hands to move the kit up.

③. Move the round holes to the corresponding 2 screws. (You can also install the kit upside down.)

④. Then gently lift the kit upwards and carefully disassemble the 2Ppower cord. ⑤. Then remove the 2 screws.

(4) Install back to the kit: first screw the 2 screws back to the screw hole used to install the kit on the back of the monitor, install the 2P power cable to the cutout, then align the round hole of the kit with the screw, and then push the kit to the screw at the center of the kit cross, then tighten the screws.

1.6 Mount Points

(1) ¼-20 Thread Points

There are (4) ¼-20 thread points (top, bottom, right side & Back center) can be easily connected to the hot shoe mount, tripod fixed installation.

(2) Tilt Arm Mounting

The monitor secures to your camera using the included Tilt Arvia shoe mount or 1/4″-20 thread. The Tilt Arm enables 180° of tilt for convenient monitor in gat nearly any angle. A cold shoe on the Tilt Arm lets you secure equipment (like microphone, LED light, or wireless receiver) that would otherwise be displaced from the camera’s accessory shoe.

1.7 Sunshade

First lock the Sunshade Frame ②with the monitor tight ③. Open the sunshade ①, and match the sticker on the sun shade inside to the marked part of the sunshade frame ②, smoot hand press 3 sides on the sunshade, and then complete the sunshade installation ④.

After the monitor is correctly connected to the power supply, the indicator light is on (red), long press , turn on the monitor, the indicator light turns yellow, and after the HDMI signal is input, the indicator light turns green.

(1). Touch screen menu operation (default touch screen is on) ①．Double-click on the screen to open the main menu (on the left side of the screen) and click on the corresponding menu to display the secondary menu. You can enter the corresponding function option to select or set with the “<” or “>” key of the option. To exit the menu, click out side the menu to exit.

②．Swipe up from the bottom of the screen to open the shortcut menu and click on the corresponding menu to open or set the corresponding function. Double- click the shortcut menu function and select the function setting with the “<” or “>” key.

③．On the left side of the screen (1/2 split screen), you can directly adjust the brightness of the screen backlight; on the right side of the screen (1/2split screen), you can directly adjust the volume.

Figure:

screen

①．When the menu is not displayed, directly press the “<” or “>” button to

adjust the volume or backlight. You can set the left and right buttons in the menu Left Right Key Set to set the volume or backlight.

②．Press the “MENU” button to open the main menu (on the left side of the screen), press “∨” or “∧” to select the secondary menu, press “>” to enter the secondary menu, and then press “∨” or “∧” to select the secondary menu Menu options. After selecting the secondary menu option, press “<” or “>” to adjust the parameter value. After adjusting to the preset parameters, press the “∨” or “∧” button to enter the next adjustment. After adjustment, press “MENU” to exit.

③．After booting, you can choose to turn on or off the screen touch function in the Touch Switch in the (the touch screen is turned on by default).

In the closed state, you need to select the Touch Switch option according to the ② step of the Button Menu Operation, and then press the “<” or “>” button to turn on the touch function.

All Waves|

Off, On
After turning on, waveform, vector, histogram and
embedded audio will be shown.

---|---
Waveform|

Off, RGB, Y, YUV
This essential feature assists with the calibration of
professional video cameras. It shows the overall
brightness of the image assisting the video professional
in correcting exposure. The waveform feature also
checks the evenness of the lighting when lighting a
chromakey or background.

Vector|

Off, On
shows how saturated the image is and where the pixels
in the image land on the color spectrum.

Histogram|

Off, RGB1, Y, RGB2

Waves Trans.| Off, 25, 50, 75
Focus Assist|

Off, On
By sharpening the edge of images to help photography
for focusing operation.

Peaking Color|

Red, Green, Blue
Due to the image color is colorful when shooting in
natural light, so the user may react to the edge of the
single line not too sensitive, at this time to change the
auxiliary focal edge line color will improve the sensitivity
of the image contour. It is convenient during filming

|

tracking in focus. The edge line color can be chosen
according to the site situation to select red, green and
blue.

Embedded Audio|

Off, On
The Audio Level Meters provide numerical indicators
and headroom levels. The audio meter is green, and will
turn yellow when exceeds -20dB, and turn red when
exceeds -9dB.

Nine Grid	Off, On
Safe Frames

Off, 80%, 85%, 90%, 93%, 96%, 2.35:1
To select the screen marker.

Center Marker| Off, On
Ratio Marker|

Off, 4:3, 13:9, 14:9, 15:9, 16:9, 1.85:1, 2.35:1
Image display ratio marker.

Mark Color|

Red, Green, Blue, Black, White
To select the above high contrast mark color according
to different image.

Mark Width|

1～7
To select the above mark color display width.

Modified Mark|

0～5
Adjust the brightness of the image outside tag line to
highlight the inside tag line of image.

scan mode

setting

F1/F2|

Safe Frames, Check Field, Focus Assist, Aspect
Ratio, Image Flip, Image Freeze, Histogram, False
Colors, Over Exposure, Embedded Audio, Nine
Grid, Zoom, Anamorphic, Waveform, Vector, Center
Marker
To set the 2 shortcut custom button F1, F2 on the panel.
e.g. Tap the menu “ ”, select F1, then tap “＜” or “＞”
to pop-up function items to select one of them, such as
“Focus Assist”. So when you exit menu, you could press
F1 directly on the front of panel to turn on “Focus Assist”
function.
Same setting for F2

---|---

4. Technical Parameters

Panel Size|

5.5” touch screen

---|---
Resolution|

1920 × 1152 pixels

Dot Pitch|

0.0639 (H) × 0.0213 (W) mm

80°/80°(L/R) 80°/80°(U/D)

Backlight| LED
Adjustable Backlight| Yes
Input| HDMI V1.4
---|---
Output|

HDMI V1.4, 3.5mm stereo headphone jack

Power In|

DC IN 12V, Barrel (5.5mm outer, 2.1mm inner)
DC IN 5V (Type-C)
Note: please use 5V/2A or more than 2A Type-C power
supply

Power Out|

DC OUT 8.4V, Barrel (5.5mm outer, 2.1mm inner）

HDMI Input/ Output
Support Format|

DSLR or mirrorless 720p (60/59.94/50/30/29.97/25/24/23.98)
1080i (60/59.94/50)
1080p (60/59.94/50/30/29.97/25/24/23.98)
3840×2160p (30/29.97/25/24/23.98)
4096×2160p (24Hz)

Power Input Voltage| 7～24V
Power Consumption| ≦9W
Unit Size (mm)|

148Lx93Hx20D (mm)

Unit Weight|

245g (with F970 install and power kit)

Mount Points|

¼-20 thread points

Working Temperature| -20℃～50℃

5. Trouble Shooting

5.1 Only black and white or monochrome picture:

① please check saturation, brightness & contrast adjustment.
② Please check “Check Field” is in black, white or monochrome
image or other condition.

5.2 NO Image after put on the power
① Check if signal cable connecting is in good condition.
② Check signal cable connecting, and make sure to use the
standard adapter to connect the monitor. If power is supplied by
battery, please check if the battery is fully charged.