FeelWorld DH101 10.1 Inch Portable Monitor User Manual
- June 3, 2024
- FEELWORLD
Table of Contents
10.1” PORTABLE MONITOR
Full Function TYPE-C
USER MANUAL
Foreword
Thank you for purchasing our 10.1-inch portable monitor. Please read this manual carefully before using the unit. Have a great experience!
Caution
-
Do not use a damaged or loose plug.This may cause an electric shock or fire.
-
Do not pull the plug out by the wire or touch the plug with wet hands.
This may cause an electric shock or fire. -
Do not excessively bend the plug and wire nor place heavy objects upon them, which could cause damage.
-
Disconnect the plug from the outlet during storms or lightening or if it is not used for a long period of time. Failure to do so may cause an electric shock or fire.
-
Put your monitor in a location with low humidity and a minimum of dust. An electric shock or fire could result inside the monitor.
-
Do not drop the monitor when moving it.This may cause damage to the product or human body.
-
When cleaning the monitor case or the surface of the IPS screen, wipe with a slightly moistened, soft fabric.
-
If your monitor does not operate normally – in particular,if there are any unusual sounds or smells coming from it – unplug it immediately and contact after sales or the professional technical staff.
-
For each hour of looking at the monitor, you should let your eyes rest for 5 minutes.This will reduce eye fatigue.
Key Feature
- 1280×800 HD IPS , 280cd/㎡
- Slim design and lightweight, easy to carry on-the-go
- OSD button operation, simple and intuitive
- Full function of Type-C1 and Type-C2 ports for power supply, display and touch
- Widely compatible with Smart Phone, PC, Mac Book, Switch, etc.
- Type-C3 port can connect to keyboard or mouse to the monitor.
- Plug and play. No additional installation or software necessary.
- Built-in dual stereo speakers
Product Structure and Instruction
Number | Function Instruction |
---|---|
1 | 3.5mm audio input |
2 | Type-C1 Video/Audio input, power supply |
3 | Type-C 2 |
Video/Audio input, power supply
4| Mini HDMI
Video/Audio input
5| MENU
Setting, Confirm
6| >
Backlight shortcut press(OSD w/o
display); Increase, Next
7| <
Volume shortcut press (OSD w/o
display; Decrease, PREV
8| EXIT
Return/exit the menu
9| Long press to Turn ON/ OFF power
10| Indicator Light Green color : detected input signal Red color: w/o input
signal
11| Type-C 3
Connect with keyboard/ Mouse
12| Speaker
13| Speaker
Ports Connection
Note: Phone for IOS system, MAC notebooks (without HDMI interface) need to use adapter devices, such as Lightning to HDMI cable
Supported Phone Model
HUAWEI| Mate10, Mate10 Pro, Mate20, Mate20 Pro, Mate20 X, Mate30, Mate30 Pro,
P20, P20 Pro, P30, P30 Pro, P40, P40 Pro
---|---
HONOR| Honor Note10, V20
SUMSUNG| S8, S8+, S9, S9+, S10e, S10, S10+, S20, S20+, Note8, Note9, Note10,
Note10+, A90 5G, Galaxy Fold, Galaxy Fold2 5G, Tab S4, Tab S5e, Tab S6
RAZER| Razer Phone, Razer Phone2
LG| G5
OPPO| R17 PRO
ASUS| ROG Phone
HTC| U Ultra
SMARTISAN| R1, Pro2S
Tips: the smartphone can be compatible which equipped with USB-C port and supports DP output function , not limited to the listed models.
Button Shortcut Operation Instructions
Press > key to bring up the backlight adjustment item, press the </ > key to adjust the analog value, after the adjustment, press EXIT key to exit.
Press < key to bring up the volume adjustment item, press the </> key to adjust the analog value, after the adjustment, press EXIT key to exit.
Press EXIT key to bring up the Input , press the</> key to select the signal input, press Exit key to exit
Menu Operation Instructions
- Use the USB-A to USB-C cable to connect the monitor to the power supply. After the power is turned on, the indicator light turns red, the indicator lights up green after connected the signal.
- Press the MENU key to enter the menu bar, use the < or >key to select the menu item, and press the MENU key confirm to enter the secondary menu.
- After entering the secondary menu, use the < or > key to select the adjustment item. Press the MENU key to confirm and enter the adjustment item, use the < or > key to adjust the parameter value. After adjustment, press the EXIT key to return to the previous menu, and then enter the next step of selection and adjustment.
Note: The menu can only be operated when a signal is connected.
Menu Function Instructions
Backlight | 0~100 |
---|---|
Brightness | 0~100 |
Contrast | 0~100 |
Sharpness | 0~4 |
Temperature| 9300, 7500, 6500, 5800, sRGB, User Under the User, the Red, Green
and Blue of the image can be adjusted. Red (0~255), Green (0 ~255), Blue
(0~255) (Use the </ > key to select the User, and then press the MENU key to
enter the User .)
---|---
Color Effect| Standard, Game, Movie, Photo
HUE| 0~100
Saturation| 100
Aspect Ratio | Full, 16:9, 4:3, 5:4, 1:1 |
---|---|
Over Drive | ON , OFF , OD Gain 0 ~100 |
DCR | ON , OFF |
Input | Auto Select, D1: TYPE C , D2: TYPE C, D3: HDMI |
---|
Volume | 0~100 |
---|---|
Mute | ON , OFF |
Language | English, |
---|---|
Menu Time | 10~60s |
OSD Transparency | 0~255 |
Reset | Press the MENU button to reset, it will restore the factory default |
parameter settings.
Information| View the corresponding screen input source information.
(Press the MENU key to enter the Information menu to view.)
---|---
Product Parameters
Panel Size | 10.1” |
---|---|
Whether Touch | Type-C full-featured ports support touch operation |
Resolution | 1280×800 pixels |
Aspect Ratio | 16:10 |
Pixel Pitch | 0.1692(W) x 0.1692(H) (mm) |
Brightness | 280cd/m² |
Contrast | 900:01:00 |
Viewing Angle | 80°/80°(L/R) 80°/80°(U/D) |
Backlight | LED |
Input | Type-C, Mini HDMI |
Note: please use 5V/3A TYPE-C power supply at least
Audio| 3.5mm Stereo Headphone, Speaker
Refresh Rate| 60Hz
Power Consumption Unit Size| ≦6W
(W/O Bracket/ Suitcase)| 242Lx152Wx18.8H (mm)
(W/O Bracket/ Suitcase)| 650g
Working Temperature| -10 ℃ ~ 50℃
Storage Temperature| -15 ℃ ~55℃
Q&A
1. Why does the DH101 connected the power, but the screen showing no signal,power saving and off?****
– Answer: Please make sure input signal and the smartphone model is in
supporting range . (the smartphone must with USB-C port and support DP output
function )
– PS: If the smartphone’s USB-C power supply cannot support DH101 running.
– Try connecting the DH101 to an independent power supply.
2. If you intend to use DH101 for watching movies or gaming with 16:9 aspect ratio, but why by default it stretch your video game to fill the screen?****
– Answer: The screen ratio of DH101 is 16:10, when you input other ratio signal, the screen will stretch. You can set the aspect ratio to 16:9 via menu setting (MENU–Advance–Aspect Ratio).
3. Connected the power, but why the menu can’t be set?****
– Answer: The menu set only can be operated after the signal input.
4.How to set the portrait mode?****
– Answer:The screen of DH101 can’t rotate automatically.But you can set the
portrait mode via PC or laptop.Take Windows 7 as an example:
– Start–Control Panel–Appearance and Individuation–Display–Adjust Screen
Resolution–Direction
Remark:
★ As we are improving product features and product performance, so if there is
any change on the specification without prior notice.