enbrighten 63171 Vanity Light User Guide

June 6, 2024
enbrighten

enbrighten logo

enbrighten 63171 Vanity Light

enbrighten 63171 Vanity Light image

Congratulations on your new Vanity Light by Enbrighten! Blending old-world décor with a clean and modern style, this lamp will enhance your space with premium illumination. Before installing, read through these instructions and take note of any safety warnings.
You don’t need special tools to install this fixture. Be sure to follow the steps in the order given. Under no circumstances should a fixture be hung on house electrical wires, nor should a swag type fixture be installed on a ceiling, which contains a radiant type heating system. If you are unclear how to proceed, consult a qualified electrician. NOTE: Proper wiring is essential for the safe operation of this fixture.

INSTALLATION

Carefully remove the fixture from the packaging and check that all parts are included as shown in the figure. Be careful not to misplace any of the included screws or parts that are needed to install this fixture.

  1. Turn power OFF
    Ensure power is turned OFF at the circuit breaker or fuse box.

  2. Install mounting bracket
    Secure the mounting bracket (C) onto your wall’s junction box with the included mounting screws (F).

  3. Neutral and live wires
    Using the wire nuts (B), connect the white fixture wire to the white (neutral) supply wire from the junction box. Then connect the black fixture wire to the black (live) supply wire from the junction box.

  4. Ground wire
    Connect the ground wire from the junction box and ground wire from the fixture with a wire nut or the ground screw (E) on the mounting bracket (C).

  5. Secure wiring
    Wrap electrical tape (not included) around the wire nuts (B) to ensure they are secured. Then, gently arrange all wiring inside the junction box, making sure there are no exposed connections.

  6. Attach canopy
    Align the canopy (G) with the pre-installed screws (D) on mounting bracket (C) and fasten it into place using the two cylinder nuts (H).

  7. Install glass shades
    Unscrew the socket rings (J) and hold the glass shades (I) in place with the larger openings facing upwards. Then, carefully screw each socket ring back into place — ensure the rounded ends are facing away from the fixture and not contacting glass.

  8. Insert bulbs
    Thread the included T bulbs into the sockets. NOTE: Use medium base 60W MAX incandescent bulbs or 60W equivalent SBCFL or SBLED bulbs as an alternative.

  9. Restore power
    With the fixture properly installed, restore power at the circuit breaker or fuse box and turn the light on using the associated in-wall switch.

COMPONENTS LEGEND

enbrighten 63171 Vanity Light
fig1

FOR YOUR SAFETY
WARNING: BE SURE THAT ELECTRICAL POWER TO THE WIRES YOU ARE WORKING ON IS SHUT OFF AT THE CIRCUIT BREAKER OR FUSE BOX.

CLEANING
To clean this fixture, wipe it with a soft and dry cloth. Do not use abrasive materials such as scouring pads or powders, steel wool or abrasive paper.

WARNING

RISK OF ELECTRIC SHOCK

  • DO NOT USE IN WET LOCATIONS
  • USE INDOORS ONLY
  • TURN POWER OFF BEFORE SERVICING
  • SEE INSTRUCTIONS
  • PROPERLY GROUND FIXTURE
  • ENSURE THAT NO BARE WIRES ARE EXPOSED OUTSIDE THE ELECTRICAL CONNECTIONS

RISK OF INJURY

  • SOME METAL PARTS IN THE FIXTURE MAY HAVE SHARP EDGES. TO PREVENT CUTS AND SCRAPES, WEAR GLOVES WHEN HANDLING THE PARTS.
  • DO NOT OPERATE THE UNIT WITH A MISSING OR DAMAGED LENS
  • ACCOUNT FOR SMALL PARTS AND DESTROY PACKAGING MATERIAL AS THESE MAY BE HAZARDOUS TO CHILDREN

THANK YOU FOR YOUR PURCHASE!

Instructions made easy
Read instructions or watch easy-to-follow video.enbrighten 63171 Vanity
Light fig2
Scan code or visit byjasco.com/63171i

exclusive deal

For deals, to register your purchase and to tell us how we’re doing, simply scan the code or visit byjasco.com/deals

Discover more innovative lighting at byjasco.com/lighting

Like our product?
Leave a review on your favorite retailer website or amazon.com
Having problems?
Let us know how we can help. Call 1-800-654-8483 between 7AM-8PM, M-F, Central Time.

MADE IN CHINA
Distributed by Jasco Products Company LLC,
10 E. Memorial Rd., Oklahoma City, OK 73114.
This Jasco product comes with a 2-year limited warranty. Visit www.byjasco.com for warranty details.
Questions? Contact our U.S.-based Consumer Care at 1-800-654-8483 between 7AM-8PM, M-F, Central Time.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

enbrighten User Manuals

Related Manuals