FEELWORLD 2600nits 6 Inch HDMI Touchscreen Monitor User Manual

: October 30, 2023
: FEELWORLD

FEELWORLD 2600nits 6 Inch HDMI Touchscreen Monitor User Manual

Product Overview

Thank you for using our 6 inch ultra bright touch screen monitor. This monitor has HDMI input and output, auxiliary power output, touch screen menu operation, HDR monitoring and support user 3D LUT upload and other features. Advanced features include Parade, Vector, Histogram, Audio Meter, Focus Assist, False Color, Zebra Exposure, Pixel to Pixel, Center Marker, Safety Marker, Marker Mat, Monochrome, Image Freeze, Zoom, Anamorphicetc. It is an ideal, portable and lightweight viewfinder and video monitor. The monitor is equipped with a battery plate; you canuse the power adapter supply or use the external battery for power supply.

To insure the best use of the unit, please readtheuser ’s manual carefully

CAUTION

Please avoid the heavy impact and drop onto the groundwhenmove the product.
The screen of this product is made of glass. Keep away from injury if the screen is broken.
Keep the product away from the heat source, and avoidtheprolonged exposures to the sun as the LCD screen will be damaged.
Please do NOT use chemical solutions to clean this product. Please wipe the monitor with a clean soft cloth to maintainthe brightness of the surface.
No adjustable components are in the monitor. Please do not take apart or repair the unit by yourself, to avoid the damage of the product.

FEATURES

Touch screen menu operation
Support HDR monitoring
User custom 3D LUT import by SD card
1920×1080 full HD IPS screen, 2600nits daylight viewable
All Waves display, Parade, Vector, RGB Histogramfunctions
Histogram is a quantitative tool to inspect the image brightness, to guide the exposure control
Focus Assist (red, green, blue, white, yellow five peakingcolorsoptional)
Audio Meter
Zebra and False Color function, convenient to guide theusinglight when shooting and the post production
Monochrome (gray, red, green, blue)
Image Zoom-in function
Anamorphic Mode
Image Flip H and Flip V, Auto Mirror
Image Freeze
Pixel to Pixel
Marker Mat, Center Marker and Safety Marker
Brightness, Contrast, Sharpness, Hue, Saturation and Color Temp Adjustment.
Stereo Earphone output
DC 8.4V power out to power your DSLR camera or mirrorlesscamera

Product Description

Front Panel
Back Panel

Button Instructions

: Long press to turn on and off the power; short pressto turn on and off the screen touch function
MENU: Long press to open the main menu and short press toopenthe shortcut menu. Rotate the wheel to select a menu item, pressit again to open the corresponding menu function. (See details: 2. Menu Operation Instruction)

Port Instructions (Bottom)

$Port Instructions $Bottom$$

3.5mm earphone port output
DC IN 12V: DC power input, polarity as the input power
DC OUT 8.4V: DC power output, polarity as the output power

Barrel output for powering your camera with a separately availableDC coupler via adaptor (like NP-FW50 Sony & LP-E6 Canon&DMW-BLF19 Panasonic).

SD Card: SD card slot, 3DLUT upload via SD card and for firmwareupgrade

Port Instructions (Left)

$Port Instructions $Left$$

Power Supply Way

The rear cover of the monitor is equipped with a F970 batteryplate, which is applicable to F970 series of batteries. Sony F970 battery plate for battery of Sony DV: Sony F970 F960 F950 F930 F770 F750 F730 F570 F550F530series
Remark: It is recommended to use standard original F970batteries. Different specifications of the battery have different capability. The working time for the monitor will be different. Higher capability (working time) will be longer. Pleasetakeoff the battery from the monitor if you don’t use the monitor inalong time.
DC IN 12V: DC power input, polarity as the input power
, Barrel (5.5mm outer, 2.1mm inner) at the bottomof themonitor, DC 7~24V Input.

Installation Way

Mount Points

There are (2) ¼-20 thread points (bottom & right side) canbeeasily connected to the hot shoe mount, tripod fixed installation.
Mount Points

Tilt Arm Mounting
The monitor secures to your camera using the included Tilt Armviashoe mount or 1/4″-20 thread. The Tilt Arm enables 180°of tilt for convenient monitoring at nearly any angle. A cold shoe ontheTilt Arm lets you secure equipment (like a microphone, LEDlight, or wireless receiver) that would otherwise be displaced fromthecamera’s accessory shoe.
Tilt Arm Mounting

Menu Operation Instructions
After the monitor is properly connected to the power supply, the indicator light is on (red). Long press button toturnonthe monitor, the indicator light turns yellow. After the signal is connected, the indicator light turns green. After startup, short press to select to turn the screen touch function on or off.

Double-click on the screen to open the main menu (on the left side of the screen) and click on the corresponding menu to display the secondary menu. You can enter the corresponding function option to select or set with the “<” or “>” key of the option. To exit the menu, click the mainmenumenu or click the touch screen outside the menu.
When the menu is not displayed, swipe up from the bottomof the screentoopen the shortcut menu, and click the shortcut menu function to openor set the function. Double-click the shortcut menu function, through the menu box “<” or “>” button, you can customize the function settings. Clickthe touch screen outside the shortcut menu to exit the shortcut menudisplay.
When the menu is not displayed, on the left side of the screen (1/2 split screen), you can directly adjust the brightness of the screen backlight; onthe right side of the screen (1/2 split screen), you can directly adjust thevolume.

Figure

When the menu is not displayed, directly rotate the wheel to backlight or volume adjustment. The wheel option can be set to backlight or volumein the menu .
Long press the MENU wheel to open the main menu (left side of thescreen), rotate the wheel to select the secondary menu. After selection, press the wheel to enter the secondary menu, and then rotate the wheel toselect the secondary menu function. After selection, press the wheel toenter the secondary menu function, rotate the wheel to adjust the parameters. After the adjustment, press the wheel to confirm and exit the secondary menu function, rotate the wheel to enter the next adjustment. When finished, long press the MENU wheel to exit the main menu.
Short press the MENU wheel to open the shortcut menu (belowthe screen), rotate the wheel to select the shortcut menu option, press the wheel todirectly turn on/off the function, if you press the parameter selection, repeat the above operation. When finished, long press the MENU wheel to exit the shortcut menu.

All Waves	OFF, ON
Parade	OFF, RGB, YUV, Y
Vector	OFF, ON
Y Histogram	OFF, ON
RGB Histogram	OFF, ON
Focus Assist	OFF, ONThe focus level and focus color items are

Nine Grid	OFF, ON
Safety Marker	OFF, 70%, 80%, 90%, 16:9, 16:10, 4:3, 5:4,

1:1,1.91:1.1, 4:5, 9:16, 1.85:1, 2.35:1
Center Marker| OFF, ON
**Marker Mat| OFF, 16:9, 16:10, 4:3, 1.85:1, 2.35:1, 2.41:1,1.9:1, 5:4, 1:1.9The Marker Mat Alpha item is displayed after the Marker Mat is turned on.
Marker Mat Alpha| 0%, 25%, 50%, 75%
Marker Color| yellow, red, green, blue, white, black
Return**| Back to the previous OSD menu

Scan Mode	Under Scan, Over Scan
Video Aspect	auto, 16:9, 16:10, 4:3, 5:4, 1.85:1,

HDR	OFF, HLG 2020, HLG 709, HLG P3
Lut Switch	OFF, ONThe Lut item is displayed after the Lut Switch is

turned on.
Lut| SLOG2, SLOG3, LOGC, VLOG
**Lut Import (SD)| After copying the 3D LUT file to the SD card and inserting it into the SD card slot, you can click the “<” or “>” key in the Lut (SD) option, or rotate the wheel to import the 3D LUT file. Note: the chip should be faced up when inserting the SD card, and press it after inserting to ensurethat the SD card is fully inserted.
****Colortemp| 5600K, 6500K, 9300K, userUnder the “user” item, the red, green, and blue values of the image can be adjusted.
Backlight| 1～100
Brightness| 0～100
Contrast| 0～100
Saturation| 0～100
Hue| 0～100
Sharpness| 0～100
Return**| Back to the previous OSD menu

**Wheel| Backlight, VolumeAfter selecting the wheel option, you can click the “<” or “>” button in the wheel option, or rotate the wheel to select one of the shortcut keys to set it to the rotary wheel adjustment (when the menu is not displayed).
---|---
Language| English, 中文, 繁體中文 , 日本語, Deutsch, Français, Italiano, Español, 한국, Pусский
Transparency| OFF, low, middle, high
OSD Time| 5s, 10s, 15s, 20s, 25s, always
****Auto Mirror| OFF, ONAfter turning on, the image will automatically adjust upside down.
Volume| 0～100
****Reset| After selecting the reset option, you can click the “<” or “>” key in the reset option or rotate the wheel to restore the factory settings.
****Firmware Update| After copying the update file to the SD card and inserting it into the SD card slot, you can click the
**| “<” or “>” key in the firmware update option or rotate the wheel to update.Note: the chip should be faced up when inserting the SD card, and press it after inserting to ensurethat the SD card is fully inserted.
Return| Back to the previous OSD menu

****	**** Exit the menu

How to Load LUT

SD card format

Support FAT32 or NTFS. For MAC system, the SD card should be formatted in MS- DOS (FAT)

Max Files Limit Maximum 50 Lut files

File requirements

The LUT file format suffix should be .cube
Single file not exceeded to 7.9Mb
Support LUT-3D-Size 16,17,32,33,64,65

Remark: LUT file name must be English or Arabic numerals

Steps for loading
Make sure the SD card correctly inse

Enter main menu –Lut Import (SD)– click “<” or “>” to load the monitor will auto detect the SD card

A. There is no SD Card, the screen will show failed,can try once more,if not work, restart the monitor and try again
B. There is SD Card, the monitor will erase the exits user’s lut fill and show“Initializing” , If there is no valid lut file in SD card, the lut will not load.Themonitor will show “clean up”
C. If there is valid lut file in SD card, the monitor will load lut files and show“[n] name. The [n] shows the quantity number. The “name” should in lut files’ name. If load successful, the screen will show “complete[n]”. [n] Stands for the quantity number for lut files should under 50.

Support Formats

HDMI Input/ Output Support Format| 480i/480p/576i/576p720p (60/59.94/50/30/29.97/25/24/23.98)1080i (60/59.94/50)1080p (60/59.94/50/30/29.97/25/24/23.98)3840x2160p (30/29.97/25/24/23.98)4096×2160p (24Hz)
---|---

Technical Parameters

Panel Size	6” touch screen
Resolution	1920 x 1080 pixels
Dot Pitch	0.069(L) x 0.069(W) (mm)
Aspect Ratio	16:9
Brightness	2600cd/m2
Contrast	1000:1
Viewing Angle	80°/80°(L/R) 80°/80°(U/D)
Backlight	LED
Input	HDMI
Output	HDMI
Audio	3.5mm Stereo Headphone
Power Out	DC OUT 8.4V, Barrel (5.5mm outer, 2.1mm inner; PowerDSLR

Trouble Shooting

Only black and white or monochrome picture

please check saturation, brightness & contrast adjustment.
Please check “Monochrome” is in black, white or monochrome image or other condition.

NO Image after put on the power

Check if signal cable connecting is in good condition.
Check signal cable connecting, and make sure to use the standard adapter to connect the monitor. If power is supplied by battery, please check if the battery is fully charged