FEELWORLD F970 5.5 Inch HDMI High Bright Field Monitor User Manual

FEELWORLD F970 5.5 Inch HDMI High Bright Field Monitor

Product Information

Specifications:

• Resolution: 1920×1080 full HD IPS screen
• Brightness: Ultra-bright 1600nit
• Features: Touch screen menu operation, support HDR monitoring, support 3D LUT Log to REC.709, Waveform, Vector scope, RGB Histogram, Focus Assist, Monochrome functions
• Power: DC 8V power out for DSLR or mirrorless camera
• Ports: HDMI IN, HDMI OUT, 3.5mm earphone port, SD card slot

Product Usage Instructions

1. Power On/Off and Indicator Light:
   To power it on, press the power button. The indicator light will turn yellow when the monitor is on and green when a signal is connected.

2. Touch Screen Operation:
   Short press the screen to turn on/off the touch function for menu operation.

3. Menu Operation:
   To access the main menu, press the MENU button. Use the wheel to navigate and select menu items. Press to confirm.

4. External Equipment Installation:
   Use the F970 Install and Power Kit to install external equipment like wireless transmitters, LED lights, or video converters powered by a Sony F970 battery.

5. Battery Handling:
   Ensure to press the PUSH lock before removing the battery from the Battery Slot. Use NP-F series batteries for power.

FAQ:

• Q: Can I clean the screen with chemical solutions?
  A: No, please use a clean soft cloth to wipe the monitor surface to maintain brightness.

• Q: How do I adjust the backlight brightness?
  A: The backlight brightness can be adjusted automatically by the light sensor located on the top panel.

Product Overview

Thank you for using our 5.5-inch high bright touchscreen monitor. This monitor is visible in sunlight, a full HD LCD touch screen for easy operation. Supports HDMI signal up to 4K@30Hz, HDR monitoring, custom 3D LUT and other professional auxiliary composition tools.

The rear monitor comes with an F970 external install and power kit, which can be installed such as wireless transmission, LED light, etc. It combines the monitor with wireless transmission to get rid of unnecessary cables, which is perfect for director monitoring, 1st AC to focus pulling in the film crew. The compact size and lightweight can be used with a gimbal to move quickly on set.

To ensure the best use of the unit, please read the user’s manual carefully

CAUTION

1. Please avoid heavy impact and drop onto the ground when moving the product.
2. The screen of this product is made of glass. Keep away from injury if the screen is broken.
3. Keep the product away from the heat source, and avoid prolonged exposure to the sun as the LCD screen will be damaged.
4. Please do NOT use chemical solutions to clean this product. Please wipe the monitor with a clean soft cloth to maintain the brightness of the surface.
5. No adjustable components are in the monitor. Please do not take apart or repair the unit by yourself, to avoid the damage of the product.

FEATURES

• 1920×1080 full HD IPS screen
• Touch screen menu operation， improve shooting efficiency
• Ultra-bright 1600nit, clearly visible in the sun
• Light sensor auto-dimming
• Support HDR monitoring, what you see is what you get
• Support 3D LUT Log to REC.709 and user 3D LUT upload
• Sony F970 external install and power kit design can be used to install and supply power to external equipment, easy to install and disassemble, simplifying your photography equipment.
• With Waveform, Vector scope, RGB Histogram, Focus Assist, Monochrome etc. functions, can help you accurately exposure and focus every shot.
• Stereo Earphone output
• DC 8V power out to power your DSLR camera or mirrorless camera

Product Description

Front Panel Instruction

Indicator Light:
After connecting the power, the indicator light is on (red). Long Press the button to turn on the monitor, and it turns yellow. After the signal is connected, it turns green.

Rear Panel Instruction

• Battery Lock: The PUSH lock will lock after the battery is installed, please press PUSH first before removing the battery.
• F970 Battery Slot: It is applicable to install the NP-F series of batteries.
• F970 Install and Power Kit: Installing external equipment, like wireless transmitter, LED light, video converter and others which can be powered by a Sony F970 battery. (The details see: 1.7 Sony F970 Install and Power Kit)

Top Button Instruction

• Touch: Long press to turn on and off the power; short press to turn on and off the screen touch function
• Light Sensor: The backlight mode under the icon is set to Auto, and the brightness of the backlight can be adjusted automatically by the light sensor.
• MENU: Long press to open the main menu and short press to open the shortcut menu. Rotate the wheel to select a menu item, and press it again to open the corresponding menu function. (The details see: 2. Menu Operation Instruction)

Bottom Port Instruction

• DC IN 12V: DC power input, polarity as the input power
• DC OUT 8V: DC power output, polarity as the output power Barrel output for powering your camera with a separately available DC coupler via an adaptor (like NP-FW50 Sony & LP-E6 Canon&DMW-BLF19 Panasonic).
• SD Card: SD card slot, 3DLUT upload via SD card and for firmware upgrade

Left Port Instruction

• HDMI IN: HDMI signal input, up to 4K@30Hz
• HDMI OUT: HDMI signal output, up to 4K@30Hz
• : 3.5mm earphone port output

Power Supply Way

1. The rear cover of the monitor is equipped with an F970 battery plate, which applies to the NP-F series of batteries.

   • Sony F970 battery plate for a battery of Sony DV:
     Sony F970 F960 F950 F930 F770 F750 F730 F570 F550 F530 series

   • Remark: It is recommended to use standard original F970 batteries. Different specifications of the battery have different capabilities. The working time for the monitor will be different. Higher capability (working time) will be longer. Please take off the battery from the monitor if you don’t use the monitor for a long time.

2. DC IN 12V: DC power input, polarity as the input power Barrel (5.5mm outer, 2.1mm inner) at the bottom of the monitor, DC 7~24V Input.

Sony F970 Install and Power Kit
A Sony F970 external install and power kit design is added to the back of the monitor. The external kit can be used to install and install external equipment, like a wireless transmitter, LED light, video converter and others which can be powered by a Sony F970 battery. The kit has two cross grooves, you can adjust the position of the external device by loosening 2 screws up and down / left or right, or installing the kit upside down.

Installation Way

Mount Points
There are (2) ¼-20 thread points (bottom & right side) that can be easily connected to the hot shoe mount, and tripod fixed installation.

Menu Operation Instruction

• After the monitor is properly connected to the power supply, the indicator light is on (red). Long press TOUCH the button to turn on the monitor, and the indicator light turns yellow. After the signal is connected, the indicator light turns green.
• After startup, short press TOUCH to select to turn the screen touch function on or off.

Touch screen menu operation (default touch screen is on)

1. Double-click on the screen to open the main menu (on the left side of the screen) and click on the corresponding menu to display the secondary menu. You can enter the corresponding function option to select or set with the “<” or “>” key of the option. To exit the menu, click the main menu menu or click the touch screen outside the menu.
2. When the menu is not displayed, swipe up from the bottom of the screen to open the shortcut menu, and click the shortcut menu function to open or set the function. Double-click the shortcut menu function, and through the menu box “<” or “>” button, you can customize the function settings. Click the touch screen outside the shortcut menu to exit the shortcut menu display.
3. When the menu is not displayed, on the left side of the screen (1/2 split screen), you can directly adjust the brightness of the screen backlight; on the right side of the screen (1/2 split screen), you can directly adjust the volume.

Figure:

MENU Wheel Menu Operation

1. When the menu is not displayed, directly rotate the wheel to backlight or volume adjustment. The wheel option can be set to backlight or volume in the menu .
2. Long press the MENU wheel to open the main menu (left side of the screenand ), rotate the wheel to select the secondary menu. After selection, press the wheel to enter the secondary menu, and then rotate the wheel to select the secondary menu function. After selection, press the wheel to enter the secondary menu function, and rotate the wheel to adjust the parameters. After the adjustment, press the wheel to confirm and exit the secondary menu function, rand otate the wheel to enter the next adjustment. When finished, long press the MENU wheel to exit the main menu.
3. Short press the MENU wheel to open the shortcut menu (below the screen), rotate the wheel to select the shortcut menu option, and press the wheel to directly turn on/off the function, if you press the parameter selection, repeat the above operation. When finished, long press the MENU wheel to exit the shortcut menu.

Menu Function Instruction

All Waves

| OFF, ON

After turning on, waveform, vector, histogram and embedded audio will be shown.

---|---

Parade

| OFF, RGB, YUV, Y

This essential feature assists with the calibration of professional video cameras. It shows the overall brightness of the image assisting the video professional in correcting exposure. The waveform feature also checks the evenness of the lighting when lighting a chromakey or background.

Vector

| OFF, ON

Shows how saturated the image is and where the pixels in the image land on the colour spectrum.

Histogram| OFF, ON

Focus Assist

| OFF, ON

After the Focus Assist is turned on, the Focus Level (1 ～ 10) and Focus Color (yellow, red, green, blue, white) can be adjusted.

Audio Meter| OFF, ON

Zebra

| OFF, ON

After the Zebra is turned on, the Zebra Value (1% ～ 100%)

can be adjusted.

Monochrome| OFF, grey, red, green, blue
False Color| OFF, type 1, type2
Return

| Back to the previous OSD menu
---|---

Safety Marker

| OFF, 70%, 80%, 90%, 16:9, 16:10, 4:3, 5:4, 1:1,

1.91:1.1, 4:5, 9:16, 1.85:1, 2.35:1

Center Marker| OFF, ON
Marker Mat| OFF, 16:9, 16:10, 4:3, 1.85:1, 2.35:1, 2.41:1, 1.9 ：

1, 5:4, 1:1.9

After the Marker Mat is turned on, the Marker Mat Alpha (0%, 25%, 50%, 75%) can be adjusted.

Marker Color| yellow, red, green, blue, white, black
Return

| Back to the previous OSD menu

stretch, user
Under the “ user ”, you can customize the Video Width (100% ~ 200%) and video Height (100% ~ 200%).
Anamorphic Mode| OFF, 1.25x, 1.33x, 1.5x, 1.6x, 1.8x, 2.0x, 2.0x

mag

Auto Mirror| OFF, ON
After turning it on, the image will automatically adjust upside down.
Flip H| OFF, ON
---|---
Flip V| OFF, ON
Zoom Times| OFF, 100% ～ 500%
Freeze| OFF, ON
Pixel to Pixel| OFF, ON
Return| Back to the previous OSD menu

After the LUT Switch is turned on, you can use the Lut (SLOG2, SLOG3, LOGC, VLOG).
Lut Import (SD)**| After copying the 3D LUT file to the SD card and inserting it into the SD card slot, you can click the “<” or “>” key in the Lut (SD) option, or rotate the wheel to import the 3D LUT file. (details see 4. How to load LUT)

Note: the chip should be faced up when inserting the SD card, and press it after inserting to ensure that the SD card

is fully inserted.

Colortemp

| 5600K, 6500K, 9300K, user

Under the “ user ”, the red , green , and blue values of the image can be adjusted.

Backlight Mode| auto, manual When selecting auto mode, the device will adjust the backlight automatically according to the environment
Backlight| 0 ～ 100
Brightness| 0 ～ 100
---|---
Contrast| 0 ～ 100
Saturation| 0 ～ 100
Hue| 0 ～ 100
Sharpness| 0 ～ 100
Return| Back to the previous OSD menu

Wheel| Backlight, Volume

After selecting the wheel option, you can click the “<” or “>” button in the wheel option, or rotate the wheel to select one of the shortcut keys to set it to the rotary wheel adjustment (when the menu is not displayed).

---|---
Language| 中文 , 繁體中文 , 日本語 , Deutsch, Français, Italiano, Español, 한국 , Pусский, English
Transparency| OFF, low, middle, high
OSD Time| 5s, 10s, 15s, 20s, 25s, always
Volume| 0 ～ 100
Mute| OFF, ON
Reset| OFF, ON

After selecting the reset option, you can click the “<” or “>” key in the reset option or rotate the wheel to restore the factory settings.

Firmware Update| After copying the update file to the SD card and inserting it into the SD card slot, you can click the “<” or “>” key in the firmware update option or rotate the wheel to update.
| Note: the chip should be faced up when inserting the SD card, and press it after inserting to ensure that the SD card is fully inserted.
---|---
Return| Back to the previous OSD menu

How to Load LUT

1. SD card format
   Support FAT32 or NTFS. For MAC system, the SD card should be formatted in MS- DOS (FAT)

2. Max Files Limit Maximum 50 Lut files

3. File requirements

4. The LUT file format suffix should be .cube

5. Single file not exceeding 7.9Mb

6. Support LUT-3D-Size 16,17,32,33,64,65
   Remark: LUT file name must be English or Arabic numerals

7. Steps for loading

8. Make sure the SD card is correctly inserted

9. Enter the main menu –Lut Import (SD)– click “<” or “>” to load the monitor will auto-detect the SD card

• There is no SD Card, the screen will show failed, can try once more, if not work, restart the monitor and try again
• There is an SD Card, and the monitor will erase the exit user’s fill and show “Initializing” If thelotis no valid lut file in the SD card, the lot will not load. The monitor will show “clean up”
• If there is a valid lut file in the sd card, the monitor will load lut files and show “[n] name. The [n] shows the quantity number. The “name” should be in the lut files’ name. If load successfully, the screen will show “complete[n]”. [n] Stands for the quantity number for lut files should be under 50.

Support Formats

| 480i/480p/576i/576p
---|---
HDMI Input/ Output Support Format| 720p (60/59.94/50/30/29.97/25/24/23.98)

1080i (60/59.94/50)

1080p (60/59.94/50/30/29.97/25/24/23.98)

3840x2160p (30/29.97/25/24/23.98)

| 4096×2160p (24Hz)

Technical Parameters

Power Out

| DC OUT 8V, Barrel (5.5mm outer, 2.1mm inner; Power

DSLR or mirrorless camera)

Input Voltage| 7～24V
Power Consumption| ≦9W
Unit Size| 142Lx86Hx28D (mm)
Unit Weight| 270g
Mount Points| (2) ¼-20 thread points (right, bottom)
Working Temperature| -20℃～70℃
Storage Temperature| -30℃～80℃

Trouble Shooting

Only black and white or monochrome pictures:

1. Please check saturation, brightness & contrast adjustment.
2. Please check that “Monochrome” is in the black, white monochrome image or other condition.

NO Image after putting on the power

1. Check if the signal cable connecting is in good condition.
2. Check the signal cable connecting, and make sure to use the standard adapter to connect the monitor. If power is supplied by a battery, please check if the battery is fully charged.

Earphone No sound
Check if the Volume control does not open, press the volume button, and try to increase the volume.

• If there are still other problems, please contact our related technologists.
  • As we are improving product features and product performance if there is any change in the specification without prior notice.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>