Feelworld 6 Inches 3D LUT TouchscreenMonitor User Manual

6″ 3D LUT Touchscreen Monitor
2600nits Daylight Viewable

User Manual

6 Inches 3D LUT TouchscreenMonitor

Product Overview
Thank you for using our 6 inch ultra bright touch screen monitor.
This monitor has SDI (optional), HDMI input and output, auxiliary power output, touch screen menu operation, HDR monitoring and support user 3D LUT upload and other features. Advanced features include Parade, Vector, Histogram, Audio Meter, Focus Assist, False Color, Zebra Exposure, Pixel to Pixel, Center Marker, Safety Marker, Marker Mat, Monochrome, Image Freeze, Zoom, Anamorphic etc. It is an ideal, portable and lightweight viewfinder and video monitor.
The monitor is equipped with a battery plate; you can use the power adapter supply or use the external battery for power supply.

To insure the best use of the unit, please read the user’s manual carefully

CAUTION

1. Please avoid the heavy impact and drop onto the ground when move the product.
2. The screen of this product is made of glass.Keep away from injury if the screen is broken.
3. Keep the product away from the heat source, and avoid the prolonged exposures to the sun as the LCD screen will be damaged.
4. Please do NOT use chemical solutions to clean this product. Please wipe the monitor with a clean soft cloth to maintain the brightness of the surface.
5. No adjustable components are in the monitor. Please do not take apart or repair the unit by yourself, to avoid the damage of the product.

FEATURES

• Touch screen menu operation
• Support HDR monitoring
• User custom 3D LUT import by SD card
• 1920×1080 full HD IPS screen, 2600nits daylight viewable
• All Waves display, Parada, Vector, RGB Histogram functions
• Histogram is a quantitative tool to inspect the image brightness, to guide the exposure control
• Focus Assist (red, green, blue, white, yellow five peaking colors optional)
• Audio Meter
• Zebra and False Color function, convenient to guide the using light when shooting and the post production
• Monochrome (gray, red, green, blue)
• Image Zoom-in function
• Anamorphic Mode
• Image Flip H and Flip V, Auto Mirror
• Image Freeze
• Pixel to Pixel
• Marker Mat, Center Marker and Safety Marker
• Brightness, Contrast, Sharpness, Hue, Saturation and Color Temp Adjustment.
• Stereo Earphone output
• DC 8.4V power out to power your DSLR camera or mirrorless camera

Product Description

• Front Panel

• Back Panel

1.1 Button Instructions

**** /TOUCH: Long press to turn on and off the power; short press to turn on and off the screen touch function MENU: Long press to open the main menu and short press to open the shortcut menu. Rotate the wheel to select a menu item, press it again to open the corresponding menu function.
(See details: 2. Menu Operation Instruction)

1.2 Port Instructions (Bottom)

: 3.5mm earphone port output
DC IN 12V: DC power input, polarity as the input power DC OUT 8.4V: DC power output, polarity as the output power ****Barrel output for powering your camera with a separately available DC coupler via adaptor (like NP-FW50 Sony & LP-E6 Canon&DMW-BLF19 Panasonic).
SD Card: SD card slot, 3DLUT upload via SD card and for firmware upgrade

1.3 Port Instructions (Left)

1.4 Power Supply Way

1. The rear cover of the monitor is equipped with a F970 battery plate, which is applicable to F970 series of batteries.
   Sony F970 battery plate for battery of Sony DV: Sony F970 F960 F950 F930 F770 F750 F730 F570 F550 F530 series
   Remark: It is recommended to use standard original F970 batteries. Different specifications of the battery have different capability. The working time for the monitor will be different.
   Higher capability (working time) will be longer. Please take off the battery from the monitor if you don’t use the monitor in a long time.

2. DC IN 12V: DC power input, polarity as the input power ****, Barrel (5.5mm outer, 2.1mm inner) at the bottom of the monitor, DC 7~24V Input.

1.5 Installation Way

1. Mount Points
   There are (2) ¼-20 thread points (bottom & right side) can be easily connected to the hot shoe mount, tripod fixed installation.
   

2. Tilt Arm Mounting
   The monitor secures to your camera using the included Tilt Arm via shoe mount or 1/4″-20 thread. The Tilt Arm enables 180° of tilt for convenient monitoring at nearly any angle. A cold shoe on the Tilt Arm lets you secure equipment (like a microphone, LED light, or wireless receiver) that would otherwise be displaced from the
   camera’s accessory shoe.

Menu Operation Instructions

After the monitor is properly connected to the power supply, the indicator light is on (red). Long press /TOUCH button to turn on the monitor, the indicator light turns yellow. After the signal is connected, the indicator light turns green.
After startup, short press /TOUCH to select to turn the screen touch function on or off.

2.1 Touch screen menu operation (default touch screen is on)

1. Double-click on the screen to open the main menu (on the left side of the screen) and click on the corresponding menu to display the secondary menu. You can enter the corresponding function option to select or set with the “<” or “>” key of the option. To exit the menu, click the main menu **** menu or click the touch screen outside the menu.
2. When the menu is not displayed, swipe up from the bottom of the screen to open the shortcut menu, and click the shortcut menu function to open or set the function. Double-click the shortcut menu function, through the menu box “<” or “>” button, you can customize the function settings. Click the touch screen outside the shortcut menu to exit the shortcut menu display.
3. When the menu is not displayed, on the left side of the screen (1/2 split screen), you can directly adjust the brightness of the screen backlight; on the right side of the screen (1/2 split screen), you can directly adjust the volume.

Figure:

2.2 MENU Wheel Menu Operations

1. When the menu is not displayed, directly rotate the wheel to backlight or volume adjustment. The wheel option can be set to backlight or volume in the menu ****.

2. Long press the MENU wheel to open the main menu (left side of the screen), rotate the wheel to select the secondary menu. After selection, press the wheel to enter the secondary menu, and then rotate the wheel to select the secondary menu function. After selection, press the wheel to enter the secondary menu function, rotate the wheel to adjust the parameters. After the adjustment, press the wheel to confirm and exit the secondary menu function, rotate the wheel to enter the next adjustment.
   When finished, long press the MENU wheel to exit the main menu.

3. Short press the MENU wheel to open the shortcut menu (below the screen), rotate the wheel to select the shortcut menu option, press the wheel to directly turn on/off the function, if you press the parameter selection, repeat the above operation. When finished, long press the MENU wheel to exit the shortcut menu.

Menu Function Instructions

Focus Assist| OFF, ON
After the Focus Assist is turned on, the Focus Level (1— 10) and Focus Color (yellow, red, green, blue, white) can be adjusted.
---|---
Zebra| OFF, ON
After the Zebra is turned on, the Zebra Value (1%-100%) can be adjusted.
Monochrome| OFF, gray, red, green, blue
False Color| OFF, type 1, type2
Return ****| Back to the previous OSD menu

After the Marker Mat is turned on, the Marker Mat Alpha (0%, 25%, 50%, 75%) can be adjusted.
Marker Color| yellow, red, green, blue, white, black
Return ****| Back to the previous OSD menu

Under the “user”, you can customize the Video Width (100% – 200%), Video Height (100% – 200%).
Anamorphic Mode| OFF, 1.25x, 1.33x, 1.5x, 2.0x, 2.0x mag
Auto Mirror| OFF, ON
After turning on, the image will automatically adjust
upside down.
Flip H| OFF, ON
Flip V| OFF, ON
Zoom Times| OFF, 100%∼300%
Freeze| OFF, ON
Pixel to Pixel| OFF, ON
Return ****| Back to the previous OSD menu

Return
****| Back to the previous OSD menu

Lut Switch| OFF, ON
After the LUT Switch is turned on, you can use the Lut (SLOG2, SLOG3, LOGC, VLOG).
---|---
Lut Out| OFF, ON (With SDI interface version)
Under the SDI signal, you can choose whether to loop out the LUT after the LUT function is turned on, and the default is off.
Lut Import (SD)| After copying the 3D LUT file to the SD card and inserting it into the SD card slot, you can click the “<” or “>” key in the Lut (SD) option, or rotate the wheel to import the 3D LUT file.
Note: the chip should be faced up when inserting the SD card, and press it after inserting to ensure that the SD card is fully inserted.
HDR| OFF, ON
After turning on, can choose Gamma and Gamut corresponding to the company Sony, Canon, Panasonic, Fujifilm, Bolex, RED, ARRI
Colortemp| 5600K, 6500K, 9300K, user
Under the “user”, the red, green, and blue values of the image can be adjusted.
Backlight| 0∼100
Brightness| 0∼100
Contrast| 0∼100
Saturation| 0∼100
Hue| 0∼100
Sharpness| 0∼100
Return ****| Back to the previous OSD menu

Wheel| Backlight, Volume, Zoom Times
After selecting the wheel option, you can click the “<” or “>” button in the wheel option, or rotate the wheel to select one of the shortcut keys to set it to the rotary wheel adjustment (when the menu is not displayed).
---|---
Language| r133C, English, 19*-E, Deutsch, Francais, Italian°, Espanol, !!., PyccktiA
OSD Alpha| OFF, low, middle, high
OSD Time| 5s, 10s, 15s, 20s, 25s, 30s, always
Volume| 0-100
Mute| OFF, ON
Fan| auto, off, low, middle, high
Under “auto”, the backlight is in the range of 81 to 90, the fan automatically turns on the mid-range; the backlight is in the range of 91 to 100, the fan automatically turns on the high-end; under other backlight brightness, the fan does not work.
Reset| OFF, ON
After selecting the reset option, you can click the “<” or “>” key in the reset option or rotate the wheel to restore the factory settings.
Input| HDMI, SDI (With SDI interface version)
Firmware Update| After copying the update file to the SD card and inserting it into the SD card slot, you can click the “<” or “>” key in the firmware update option or rotate the wheel to update.
Note: the chip should be faced up when inserting the SD card, and press it after inserting to ensure that the SD card is fully inserted.
Return ****| Back to the previous OSD menu

Support Formats

SDI Input Support Format (SDI version)| 720p (60/59.94/50/30/29.97/25/24/23.98) 1080i (60/59.94/50)
1080p (60/59.94/50/30/29.97/25/24/23.98) 2048x1080i (60/59.94/50)
2048x1080p (60/59.94/50/30/29.97/25/24/23.98)
---|---
SDI Output Support Format (SDI version)| 720p (60/59.94/50/30/29.97/25/24/23.98) 1080i (60/59.94/50)
1080p (60/59.94/50/30/29.97/25/24/23.98)
HDMI Input/ Output Support Format| 480i/480p/576i/576p 720p (60/59.94/50/30/29.97/25/24/23.98) 1080i (60/59.94/50)
1080p (60/59.94/50/30/29.97/25/24/23.98) 3840x2160p (30/29.97/25/24/23.98)
4096×2160p (24Hz)

Technical Parameters

mirrorless camera)
Input Voltage| 7∼24V
Power Consumption| ≤16W
Unit Size| 162Lx93.2Hx29D (mm)
Unit Weight| 300g
Mount Points| (2) Y4-20 thread points (right, bottom)
Working Temperature| -20°C∼50°C
Storage Temperature| -30°C ∼60`C

Trouble Shooting

6.1 Only black and white or monochrome picture:

1. please check saturation, brightness & contrast adjustment.
2. Please check “Monochrome” is in black, white or monochrome image or other condition.

6.2 NO Image after put on the power

1. Check if signal cable connecting is in good condition.
2. Check signal cable connecting, and make sure to use the standard adapter to connect the monitor. If power is supplied by battery, please check if the battery is fully charged.

6.3 Earphone No sound
Check if Volume control do not open, press the volume button, and try to increase the volume.

■ If there are still other problems, please contact with our related technologists.
★ As we are improving product features and product performance, so if there is any change on the specification without prior notice.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>