QAZQA 104089 Modern Wall Lamp with Motion Sensor Instruction Manual

QAZQA 104089 Modern Wall Lamp with Motion Sensor

Product Information

Specifications:

• Input Voltage: 220-240V~
• Frequency: 50Hz
• Maximum Power: 2xMax.35W
• Model: Baleno WL 2 AR70 PIR 104089/104090
• IP Rating: IP44
• Overall Sizes: 83mm x 210mm x 102mm

Product Usage Instructions

Installation :

1. Identify the incoming supply wires: LIVE (Brown or Red), EARTH (Green & Yellow), and NEUTRAL (Blue or Black).
2. Turn OFF the power supply.
3. Connect the LIVE wire of the fitting to the LIVE wire of the incoming supply.
4. Connect the EARTH wire of the fitting to the EARTH wire of the incoming supply.
5. Connect the NEUTRAL wire of the fitting to the NEUTRAL wire of the incoming supply.
6. Ensure all connections are secure.

Usage:

To turn ON the light:

7. Switch ON the power supply.
8. Adjust the LUX setting according to your preference. The LUX setting controls the sensitivity of the motion sensor.
9. The light will turn ON when motion is detected within the set LUX range.

To adjust the TIME settings:

10. Switch ON the power supply.
11. Adjust the TIME setting according to your preference. The TIME setting controls how long the light stays ON after detecting motion.
12. The light will automatically turn OFF after the set time.

FAQ:

Q: What is the purpose of the LUX setting?

A: The LUX setting determines the sensitivity of the motion sensor. Higher values mean the sensor will activate the light even in low light conditions, while lower values require more light to trigger the sensor.

Q: How do I adjust the LUX setting?

A: To adjust the LUX setting, follow the usage instructions mentioned above.

Q: What is the purpose of the TIME setting?

A: The TIME setting determines how long the light will stay ON after detecting motion. You can set it according to your preference.

Q: How do I adjust the TIME setting?

A: To adjust the TIME setting, follow the usage instructions mentioned above.

Safety Precautions

Instruction

SAFETY INSTRUCTION

Please study the instruction manual and the below information carefully before installing or using this product. Please keep this user manual for further reference

1. The luminaires may only be installed by authorized and qualified technicians according to the valid regulations for electrical installation.

2. Maintenance of the luminaires is limited to their surfaces. During maintenance, no moisture can come into contact with any areas of the terminal connections or voltage control parts.

3. The electrical supply must be switched off at the outset, preferably by means of a switch in the distribution box, before any installation, maintenance, or repair work is undertaken.

4. Exterior lighting must not be installed during rain.

5. Take account of the minimal separation distance from other objects and the room required around the fitting.

6. If in any doubt, consult a professional, taking local installation requirements into account. Some countries stipulate that lighting may be installed only by registered installers.

7. Clamping screws in electrical connections must be adequately tightened. This is particularly the case with 12V low-voltage conductors.

8. Clean with a clean, dry cloth or brush, use no solvents or abrasives. Avoid dampness on all electrical components

9. Take account of all available technical information.

10. Meaning of symbols:

    • This icon indicates the level of water-proof and dust-proof
    • Protection Class I: the fitting must be earthed
    • Protection Class II: the fitting is doubled insulated and does not require earthing
    • Protection Class III: the fitting is low-voltage
    • Minimum distance from lighted objects (meters)
    • The type of lamp and maximum size and wattage indicated in each lighting unit must not be exceeded; different items require different kinds of light sources with different bulb icons
    • The armature is designed to work only with the indicated voltage. Different items require different working voltages.
    • The luminaire can be used in combination with a dimmer
    • The luminaire can be dimmed by a wall switch
    • The reference light angle and light space of the luminaires
      This luminaire cannot be disposed of together with normal domestic waste in a standard rubbish can, but you have to bring it to a staging area for electrical waste

11. Take note of the symbols when connecting wires:

FittinQ B.V. Smaragdweg 52, 5527 LB Hapert, The Netherlands www.qazqa.nl

References

• QAZQA - Quite Unique | QAZQA

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>