Linocell 22555 Handsfree Bluetooth Headset User Manual
- June 4, 2024
- Linocell
Table of Contents
Linocell 22555 Handsfree Bluetooth Headset
Overview
- Microphone
- LED indicator
- Multifunction button
- Micro USB charging port
- Volume +/next track
- Volume -/previous track
- Ear cap
- Ear hook
Specifications
- Bluetooth version: 5.0 (up to 10 m)
- Standby time : Up to 130 h
- Call time Up to 6.5 h
- Charging input : DC5 V/500 mA (USB charger sold separately)
- Charging time : Approx. 2.5 h
- Microphone sensitivity: 100 dB +3 DB
- Charging cable : Micro USB (50 cm, included)
- Weight : 7g
- Size : 71x21x30 mm
- Wireless frequency 2402-2480 MHz
- Max. RF output power : 20 mW
Included:
Headset, Micro USB charging cable (50 cm), 3x ear caps, ear hook, manual.
Use
Charging
- Charge the headset fully before first use.
- Connect the Micro USB cable to the Micro USB charging port (4), a USB power adapter and a wall socket to charge the headset. The LED indicator (2) lights up red during charging and turns blue when the headset is fully charged. The LED indicator (2) flashes red when the battery level is low.
Note! The headset turns off during charging and cannot be used.
Power on/off
Press and hold the Multifunction button (3) to power on the headset, the LED indicator (2) lights up and flashes blue. Press and hold the Multifunction button until the LED indicator lights up red and turns off to power off the headset.
Pairing
-
Make sure the headset is powered off. Press and hold the Multifunction button (3) for 5 seconds to enter Bluetooth pairing mode. The LED indicator (2) lights up and flashes red and blue alternating. Open the Bluetooth settings on your smart device and connect to “Linocell BTH96”. The LED indicator flashes blue to confirm pairing was successful.
-
The headset can be connected to 2 devices at the same time. After pairing a device
to the headset, power off the headset and repeat the pairing process to connect a secondary device. Power the headset off and on again to complete the pairing to both devices. -
The headset automatically pairs to the most recently paired device/devices the next time you power it on.
Note! The switching of source device to the headset only works for calls, not music playback.
Control music and calls
- Answer or end call/play or pause music : press the Multifunction button (3).
- Reject incoming call : press and hold the Multifunction button (3) for 2 seconds. Volume down: press the Volume – button (6)
- Previous track : press and hold the Volume – button (6) for 2 seconds.
- Volume up : press the Volume+ button (5).
- Next track : press and hold the Volume+ button (5) for 2 seconds
- Mute microphone during call : press and hold the Volume – button (6) for 2 seconds. Switch audio from Bluetooth to phone speaker during call: press and hold the
- Volume+ button (5) for 2 seconds.
- Activate voice assistant : press and hold the Multifunction button (3) for 2 seconds.
Control calls connected to 2 devices
- Hang up current call and answer incoming call on secondary device : press the Multifunction button (3).
- Put current call on hold and answer incoming call on secondary device: press the Multifunction button (3) twice.
Safety information
This product contains a rechargeable Li-ion battery, and the battery cannot be replaced. To prevent the risk of hearing damage, do not listen at high volume levels for long periods of time.
Simplified EU Declaration of Conformity
Kjell & Company hereby declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. Full text of the EU declaration of conformity is available at www.kjell.com/22555.
www.linocell.com Box 50435 Malmö Sweden 2022-08-31