Linocell 99477 Solar Power Bank User Manual
- June 12, 2024
- Linocell
Table of Contents
Linocell 99477 Solar Power Bank
Charge the powerbank
- Connect the charging cable to the power bank’s Micro USB port and to a USB charger. The LED indicators show the charging progress in four steps (25, 50, 75, and 100 %). A full charge takes 5-8 hours.
- Solar charging provides up to 800 mA in strong sunlight and is suitable for emergency situations. A green LED indicates solar charging.
Use
Connect a cable from a USB port to a USB device. Press the power switch to turn on the powerbank. The device will start charging automatically. The LED indicators show the capacity left in the powerbank.
LED light
There’s a small LED light on the back of the powerbank. Press and hold the power button for at least 3 seconds to turn it on. It has 3 modes: Steady glow, slow blinking, and fast blinking. Press the button to alternate between modes. Press and hold the button to turn it off.
Warning
- Do not expose the powerbank to temperatures over 45 °C over a prolonged time.
- Do not charge the powerbank at the same time as the powerbank is charging a device.
- Unplug the cables when the powerbank is not in use.
- Do not short-circuit the powerbank.
- Do not puncture the powerbank.
- Do not expose the powerbank to water.
- Do not use the powerbank if it smells strange, is leaking, gets hot or acts abnormal.
Specifications
- Battery: Lithium
- Capacity: 8000 mAh
- Input: 5 V, 2.1 A (solar 120-800 mA)
- Output: 5 V, 2.1 A (total, shared for both sockets)
- Charging time : 5-8 hours
- Weight: 345 g
- Size: 264x155x15 mm
www.linocell.com
Box 50435, Malmö, Sweden.
Version: 2022-05-16.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>