linocell 24366 True Wireless Earphone Instruction Manual

manual

True Wireless Earphones

Item: 24366, 24367

www.linocell.com
Box 50435, Malmo,
Sweden
2023-04-26

        Linocell®

Overview

Charging case

1. USB-C charging port
2. LED indicator

Earphones

1. Left
2. Right
3. Microphone/LED indicator
4. LED indicator
5. Multifunction button

Specifications

of ear tips (S/M/L), manual

Use

Charging

Charge the charging case and earphones fully before first use.

Connect the included USB-C cable between the charging port on the back of the charging case and a USB power adapter. Connect the USB power adapter to a wall socket. The charging case’s LED indicator lights up red during charging and turns off ‘when the charging case s fully charged.

Place the earphones in the charging case to charge them. Both earphones has an LED indicator that lights up red during charging. The LED indicators turn off when the earphones are fully charged

Power on/off

Take the earphones out of the charging case. The earphones’ LED indicator lights up and the earphones turn on automatically. If the LED indicators do not light up when the earphones are taken out of the charging case, place the earphones back in the charging case, charge the case and try again.
Place the earphones back in the charging case to turn them off.

Pairing

Before pairing, make sure the earphones are placed in the charging case

Remove the earphones from the charging case. The earphones pair together automatically and the LED indicators start flashing rapidly. Open the Bluetooth settings on ‘your smart device and connect to “Linocell BTH13″. The LED indicators stop flashing rapidly to confirm the pairing was successful. The earphones automatically connect to the last paired smart device the next time they are removed from the case.

Note! The earphones power off automatically after 5 minutes if they have not been paired with a device via Bluetooth,

Control music and calls

Play or pause music/end call: double press the Multifunction button on either earphone
Answer an incoming call: press the Multifunction button on either earphone.
Reject an incoming call: press and hold the Multifunction button on either earphone for 2 seconds.
Increase volume: press the Multifunction button on the right earphone.
Decrease volume: press the Multifunction button on the left earphone.
Next track: press and hold the Multifunction button on the right earphone for 1 second.
Previous track: press and hold the Multifunction button on left earphone for 1 second.
Voice assistant: triple press the Multifunction button on either earphone.

Reset

Take the earphones out of the charging case. Press the multifunction button on both earphones at the same time rapidly 6 times. The LED indicators light up red and the earphones are reset. Place the earphones back in the case.

Follow the instructions under “Troubleshooting - > Problem 2″ in this manual to remove the connection between the earphones and your smart device.

Troubleshooting

Problem 1: Pairing fails.
If the pairing process keeps failing, try the following:

• Restart your smart device.
• Keep the earphones and your smart device within 10 meters of each other during pairing.
• Make sure there are no obstacles between the earphones and your smart device during pairing, or signal interferences nearby (for example thick walls or a radio transmitter such as a wifi router or repeater).

Follow the instructions under “Pairing” in this manual to connect the earphones to your smart device.

Problem 2: | paired the earphones with my phone previously, but they fail to pair again.
Make sure Bluetooth is enabled on your smart device. Go to the Bluetooth settings for ‘your smart device. Find “My devices”/“Paired devices”, locate “Linocell BTH13″ in the list and tap the “ ” icon. Select the option “Forget This Device”

Follow the instructions under “Pairing” in this manual to connect the earphones to your smart device.

Problem 3: The connection to the earphones is not stable.
Make sure that the distance between your earphones and smart device is not more than 10 meters. Make sure there are no objects between the earphones and your smart device, or that a radio transmitter or wifi signal is interfering.

Problem 4: The earphones’ battery power depletes rapidly.
The earphones’ playtime varies depending on the volume level and audio content. Place the earphones back into the charging case after use to avoid unnecessary power consumption.

Problem 5: The earphones are automatically reconnecting to my phone while being charged in the charging case.
If the charging case runs out of power during charging, the earphones automatically turn on and attempt to reconnect to the latest paired Bluetooth device. Make sure the charging case’s built-in battery is charged and that the earphones connect properly to the metal connectors when they are placed in the charging case.

Safety information

This product contains a rechargeable Li-Po battery that cannot be replaced. To prevent possible hearing damage, do not listen at high volume levels for long periods of time.

Simplified EU Declaration of Conformity

Kiell & Company hereby declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. Full text of the EU declaration of conformity is available at www.kjell.com/24366

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>