Linocell 23846 Wireless Kids Headphone User Manual
- June 6, 2024
- Linocell
Table of Contents
Linocell 23846 Wireless Kids Headphone User Manual
Overview
Specification
Bluetooth Version | 5.0 |
---|---|
Sensitivity: | 8513d8/1 mw1S.P.L at 1K1-1z) |
Listening frequency: | 20 Hz – 20 kHz |
Wireless frequency: | 2402.2480 MHz |
Transmission power: | 20 mW (max) |
Charging input: | 5 V, 300 mA |
Charge time: | 2 h |
Battery time: | Up to 20 h |
Range: | Up to 10m |
Charging cable: | Micro-USB |
Charging cable length: | 20 cm |
Audio cable length: | 120 cm |
Weight: | 86.5 g |
Use
Power on/off
To turn on the headphones, press and hold the Multifunction button until the
status indicator blinks blue. To turn off the headphones, press and hold the
Multifunctional button again until the status indicator blinks red.
Charging
Connect the USB cable to the charging port and a computer or a USB power
adapter. The status indicator is red during charging and turns off when the
battery is fully charged. The status indicator blinks red if the battery level
is low. Note: The head-phones turn off when connected to a charging source.
Pairing
Make sure the headphones are turned off. Press and hold the Multifunctional
button for 5 seconds to enter pairing mode. The status indicator blinks blue
and red. Turn on Bluetooth on your device and search for “BTH-70”, select it
when found. If necessary, enter the password “0000” to pair and connect the
headphones. Some devices also ask to confirm the headset connection after
pairing. The status indicator blinks blue after the pairing is successful. If
no Bluetooth devices are paired within 5 minutes the headphones turn off.
General functions
Change the volume with the Volume + and Volume – buttons. You can also skip to
the next track or go to the previous one by holding in the corresponding
button. Play or pause the current track by pressing the Multifunctional
button. To answer or end a call, press the Multifunctional button. Press and
hold it for at least 2 seconds to reject an incoming call. Double-click it to
redial the last call.
Note: The functions of the buttons may not always be the same for all
devices and brands.
AUX cable
If the battery level of the headphones is low, you can listen to music
withthe AUX ca-ble instead. Connect the AUX cable to the headphones and your
device with a 3.5 mm audio port to listen to music wired. The control buttons
do not work with the cable.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>