Linocell 89995 Wireless QI Car Charger User Manual

June 4, 2024
Linocell

manual


Wireless QI car charger

Item: 89995

www.linocell.com
Box 50435 Malmo
Sweden
2022-07-13

Linocell®

Specifications
Input: (DC) 5 V, 2 A/9 V, 2 A (QC 3.0)
Output: 5 W/7.5 W/10 W/15 W
Charging cable: USB-A to USB-C, 1 meter (incl.)
Length, extendable arm: 18-23 cm
Width, holder: 58-87 mm
Size: 75x68x120 mm (excl. mount)
Weight: 126 g (excl. mount)
Frequency: 110-205 KHz
Effective radiated power: -43.812 dBuA/m
Mounting

Unscrew the mounting ring (3) from the holder. Thread the mounting ring over the ball joint (2) on top of the mount, insert the ball joint into the holder and secure the pieces together by screwing the mounting ring on the holder.

Use the included dashboard adapter to attach the mount on the dashboard.
Wash the adhesive side with water and mild detergent and let dry to reapply to a new surface.

Lift the lock lever (1) on the front of the mount and attach the rubber cup to a flat surface. Press the lock lever down to secure it.
Press the release button (4) to release the brackets. Place your device into the holder and on the transparent adjustable foot (6). Push the brackets together while pressing your device to the back of the holder (5).

Note! Using excessive force to remove the device from the holder can cause damage.

Charging
Connect the holder to a USB-C cable and to a USB power adapter (sold separately). The holder turns on automatically.

The LED indicator shows the status of the holder:

Blue: charging
Green: charger is on or device is fully charged.

Simplified EU Declaration of Conformity

Kjell & Company hereby declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. Full text of the EU declaration of conformity is available at www.kjell.com/89995

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals