HYUNDAI L300 Mobile Phone User Guide
- June 4, 2024
- HYUNDAI
Table of Contents
HYUNDAI L300 Mobile Phone
Attentions
SWITCH OFF IN HOSPITALS
Please abide by relevant provisions or regulations. Please turn off your
mobile phone near medical equipment.
SWITCH OFF WHEN REFUELING
Don’t use the phone at a refueling point. Don’t use near fuel or chemicals.
SIM CARDS ARE PORTABLE
Keep your phone, phone parts and accessories out of children’s reach.
BATTERY
Please do not destroy or damage the battery, it can be dangerous and cause
fire.
Please do not throw battery in fire to avoid hazard.
When battery cannot be used, please dispose in safe environment. If the
battery or the charger is broken or old, please stop using them, and replace
with certified genuine battery.
USE QUALITY EQUIPMENT
Use authorized equipment to avoid danger.
ROAD SAFETY COMES FIRST
Give full attention while driving, Park before using your phone. Please follow
traffic rules of local citytown.
INTERFERENCE
All wireless devices may be susceptible to cause interference, which could
affect performance.
SWITCH OFF IN AIRCRAFT
Wireless devices can cause interference in aircraft. It’s not only dangerous
but also illegal to use mobile phone in an aircraft.
Get Started
Get to grip with the basics and have your phone up and running in no time.
Overview
Keys definition:
| Keys | Definition |
|---|
Power key(End key)
|
- Press it to end a call being dialed or end an ongoing call.
- Press it to exit the menu and return to the standby state.
- You can hold it for two or three seconds can power on/off the mobile phone.
Dial key
|
- Press it to originate a call by entering the called number or selecting a contact from the phonebook.
- Press it to receive an incoming call.
- Press it in standby state to show the latest call records .if you want to dial a call.
Direction key
|
- Press them to scroll the options when browsing a function list.
- In edit state, press direction keys to navigate.
Left and right soft key| The bottom line on the screen displays the functions
of the Left and Right soft key.
OK key| Press it to confirm a selection.
Number keys, * key and # key|
- Press number keys 0 through 9 to input or edit state to input numbers and characters.
- In idle screen, you can press left soft key then press * to lock/unlock keypad.
- Press two times the key * to input “+” in standby interface. When the symbol “+” appears.
- Press the * key quickly to input “P” or “W”,”P” and “W” are used for calling the extension; “+” are used for dialing an international call.
Insert SIM card
- Remove the battery cover
- Put the SIM card into the slot
- Put the SD card into card slot.
Tip: The SIM/SD card are small parts. Please keep away from Children to
avoid swallowing the card by accident.
Please do not touch the metal surface of SIM card and away from
electromagnetic field to avoid damage data.
Charge the Battery
Charge the battery before using it. Connect the USB cable to the USB power
adaptor, and then plug the end of the USB cable into the USB Port.
Settings
Phone settings
In this menu, you can set according to your preferences and in different
situations (Time & date, Language settings, Shortcut settings, Auto power
on/off, Power management, Restore factory settings).
Notes: The password is 1234.
Display
In this menu, you can set according to your preferences and in different
situations (Animation effect, Wallpaper settings, Idle display settings,
Screen saver settings, Contrast, Keypad backlight time, Auto keypad lock).
Security
This function provides you with related settings about safety use (PIN, Modify
PIN2, Phone locked, Modify the cellphone password, Privacy , Lock screen by
end-key, Fixed dialing number, Blacklist).
Call Settings
In this menu, you can set according to different situations.
(Dual-SIM, Call divert, Call waiting, Call barring, Hide ID, Others.)
Connections
In this menu, you can set according to different situations.
(Network account, Data Service, Data roaming, Preferred data SIM, Network
selection, Network type, VoLTE)
Warnings and notes
I MPORTANTIN FORMATION ON SAFE AND EFFICIENT OPERATION. Read this information before using your phone. For the safe and efficient operation of your phone, observe these guidelines:
Potentially explosive at atmospheres: Turn off your phone when you are in any areas with a potentially explosive atmosphere, such as fueling areas (gas or petrol stations, below deck on boats), storage facilities for fuel or chemicals, blasting areas and areas near electrical blasting caps, and areas where there are chemicals or particles (Such as metal powders, grains, and dust) in the air. Interference to medical and personal Electronic Devices: Most but not all electronic equipment is shielded from RF signals and certain electronic equipment may not be shielded against the RF signals from your phone.
Audio Safety : This phone is capable of producing loud noises which may damage your hearing. When using the speaker phone feature, it is recommended that you place your phone at a safe distance from your ear.
Other Media Devices, hospitals: I f you use any other personal medical device, consult the manufacture of your device to determine if it is adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information. Turn your phone OFF in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.
Product statement on handling and use: You alone are responsible for how
you use your phone and any consequences of its use.
You must always switch off your phone wherever the use of a phone is
prohibited. Use of your phone is subject to safety measures designed to
protect users and their environment. Always treat your phone and its
accessories with care and keep it in a clean and dust-free place.
Battery: Please note that use of certain data applications can result in heavy battery use and may require frequent battery charging. Any disposal of the phone or battery must comply with laws and regulations pertaining to lithium-ion or lithium-ion polymer batteries.
Faulty and damaged products: Do not attempt to disassemble the phone or
its accessory. Only qualified personnel must service or repair the phone or
its accessory. If your phone or its accessory has been submerged in water,
Punctured, or subjected to a severe fall, do not use it until you have taken
it to be checked at an authorized service center.
Specific Absorption Rate (SAR) certification information Your device conforms
to U.S. Federal Communications Commission (FCC) standards that limit human
exposure to radio frequency (RF) energy emitted by radio and
telecommunications equipment. These standards prevent the sale of mobile
devices that exceed a maximum exposure level (known as the Specific Absorption
Rate, or SAR) of 1.6W/kg. SAR information on this and other model devices can
be accessed online on the FCC’s website through
transition.fcc.gov/oet/rfsafety/sar.html.
In normal use, the actual SAR is likely to be much lower, as the device has
been designed to emit only the RF energy necessary to transmit a signal to the
nearest base station. By automatically emitting lower levels when possible,
your device reduces your overall exposure to RF energy.
The FCC has granted an Equipment Authorization for this model device based on the compliance of all reported SAR levels with the FCC RF exposure guidelines. This device has a FCC ID number : 2AZP5-L300FS [ Model Number : L300 ] and the specific SAR levels for this device can be found at the following FCC website : www.fcc.gov/oet/ea/.
FCC Warning
Labeling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Information to user.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Information to the user.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. Absorption Rate (SAR) information:
This device meets the government’s requirements for exposure to radio waves.
The guidelines are based on standards that were developed by independent
scientific organizations through periodic and thorough evaluation of
scientific studies. The standards include a substantial safety margin designed
to assure the safety of all persons regardless of age or health.
FCC RF Exposure Information and Statement The SAR limit of USA (FCC) is 1.6
W/kg averaged over one gram of tissue. This device was tested for typical
body-worn operations with the head 0mm and 10mm from the body. To maintain
compliance with FCC RF exposure requirements, use accessories that maintain a
appropriate separation distance between the user’s body and the back of the
device. The use of belt clips, holsters and similar accessories should not
contain metallic components in its assembly. The use of accessories that do
not satisfy these requirements may not comply with FCC RF exposure
requirements, and should be avoided. Use only the supplied or an approved
antenna.
Imported/distributed by DUO AMERICA, LLC Licensed by HYUNDAI Corporation Holdings, Korea
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>