CANARMNA IPL926A01113 LED Chandelier Instructions
- June 9, 2024
- CANARMNA
Table of Contents
CANARMNA IPL926A01113 LED Chandelier Instructions
INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS READ ALL INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS
TOOLS AND MATERIALS REQUIRED
-
Phillips Screwdriver
-
Wire Cutters
-
Pliers
-
Wrench
Wiring supplies as required by local electrical code
SAFETY PRECAUTIONS
- TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE.
- THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
- CONNECT THE GROUND WIRES (BARE COPPER OR GREEN) FROM YOUR FIXTURE TO THE GROUND WIRE (BARE COPPER OR GREEN) OR GROUND SCREW IN THE ELECTRICAL BOX.
- TO CLEAN THE FIXTURE, TURN OFF THE POWER, WAIT FOR IT TO COOL, AND WIPE THE FIXTURE WITH A CLEAN, SOFT CLOTH.
NOTE: Product may not look exactly as shown in figures.
INSTALLATION
-
Mount the mounting bracket to electrical box using electrical box screws (not included).
-
Connect the ground wires (bare copper or green) from your fixture to the ground wire (bare copper or green) or ground screw in the electrical box. Connect the black wire from the fixture to the black wire in the electrical box and connect the white wire from the fixture to the white wire in the electrical box.
NOTE: Do not disconnect any pre-wired connections. -
Once connections of wires are completed, carefully tuck wires and wire nuts into the outlet box making sure no bare wire is visible at the wire nuts.
-
Attach fixture to mounting bracket by tightening the 2 screws.
-
Adjust the height of the fixture by pushing the button.
dimmable
This LED light is compatible with the dimmers:
LEVITON# 742-6672-HLW , 722-6674-PDW MAX 150 W, Lutron # SCL 153PH-WH MAX 150
W. The MAX rated wattage of this model is 30.5 W
Tel: 613-342-5424,
Fax: 800-263-4598