Govee H7121 Smart Air Purifier User Manual

June 9, 2024
Govee

Govee H7121 Smart Air Purifier User Manual
Govee H7121 Smart Air Purifier

Safety Instructions

General Safety

  • Only use Smart Air Purifier as described in this manual.
  • Do not use without removing the plastic wrap from the filter. If not removed, the air purifier will not filter air, and may overheat, causing a fire hazard.
  • Do not use the air purifier outdoors.
  • Keep the air purifier away from water or wet, damp areas. Never place in water or liquid.
  • Do not use in excessively humid areas.
  • Keep the air purifier away from heat sources such as stovetops, ovens, or radiators.
  • Do not use where combustible gases, vapors, metallic dust, aerosol (spray) products, or fumes from industrial oil are present.
  • Keep 5 feet / 1.5m away from where oxygen is being administered.
  • Supervise children when they are near the air purifier.
  • Do not place anything into the openings of the air purifier.
  • Do not place heavy objects on the air purifier.
  • Keep the inside of the air purifier dry. To prevent moisture build up, avoid placing in rooms with major temperature changes or underneath air conditioners.
  • Always unplug the air purifier before servicing (such as when changing the filter).
  • Do not use the air purifier if it is damaged or not working correctly, or if the power cord or plug is damaged. Do not repair yourself. Contact Customer Support
  • WARNING: To reduce the risk of fire or electric shock, do not use this air purifier in combination with any 3rd party controls (such as a dimmer switch).
  • Not for commercial use. Household use only

Power Cord & Plug

  • Located the air purifier near the electrical outlet it is plugged into.
  • Never place the power cord near any heat sources.
  • Do not cover the power cord with a rug, carpet, or other covering. Do not place the cord under furniture or appliances.
  • Keep the power cord out of areas where people frequently walk. Place the cord where it will not be tripped over.
  • This air purifier has a polarized plug (one prong is wider than the other), which fits into a polarized outlet in only one orientation. This is a safety feature to reduce the risk of electric shock. If the plug does not fit, reverse the plug to the correct orientation. If it still does not fit, do not bypass this safety feature and try forcing the plug into the outlet. Instead, do not use it with the outlet.
  • This air purifier uses standard US 120V, 60Hz outlets. If using outside the US, check for compatibility

Package Includes

Item Quantity
Air Purifier 1
3-Stage Filter (Pre-Installed) 1
User Manual 1
Quick Start Guide 1

Specifications

Power Supply AC 120V, 60Hz
Rated Power 36W
Effective Range 258 ft² / 24 m² Note:Effective for larger rooms, but

purification will
take longer. Ideal Room Size is based on 5 complete
air changes per hour (ACH).
CADR| 120 CFM / 204m³/h
Noise Level| 20–48dB
Air Purifier Dimensions| 6.6 lb / 3 kg
Air Purifier Weight| Temperature: 14°F–104°F / -10°C –40°C
Operating Conditions| Humidity: < 85% RH

Getting to know your Smart Air Purifier

OVERVIEW

a. Fan Speed Indicator
b. Fan Speed Button
c. On/Off Button
d. Sleep Mode Button
e. Timer Button
f. Timer Indicator
g. WiFi® Indicator
h. Night Light Button
i. Lock Button
j. Filter change Indicator & Button
k. Air Outlet
l. Housing
m. Air Inlet
n. Power Cord
o. Filter Cover
p. True HEPA Filter
q. Screw Nut

Getting Started

  1. Flip the air purifier over. Twist the screw nut counter clockwise and remove bottom filter cover.
    INSTRUCTION

  2. Remove the filter from its plastic packaging and place the filter back into the air purifier.
    INSTRUCTION

  3. Reattach the filter cover and twist clockwise screw nut to lock.
    INSTRUCTION

  4. Place the air purifier on a flat, stable surface with the display facing up. Allow at least 15 inches / 38cm of clearance on all sides of the air purifier. Keep away from anything that would block airflow, such as curtains.

INSTRUCTION

Using Your Smart Air Purifier

Using Govee Home App allows access to additional functions and features, along with the ability to control the air purifier remotely

Functions and Controls

Power On & Off

  1. Plug in the power cord, and all lights will flash once.The air purifier will then enter stand-by status automatically.
  2. Tap On/Off Button to turn the air purifier On/Off. The fan will start on level I once turned On.
    Note: Ensure the outlet’s voltage is compatible with Smart Air Purifier or else it may cause damage.

Change Fan Speed
Tap Fan Speed Button to change fan speeds between I, II, and III.
Note:

  • The fan speed indicators are not buttons and cannot be used to change fan speed.
  • The fan speed indicators will light up when active.
  • Fan speed III is the loudest, but cleans the air quickest.
  • For best results, or to address a specific air quality issue such as smoke, run the air purifier at high speed (fan speed III) for 15–20 minutes before using a lower speed.
  • To effectively clean air, keep windows and doors closed while the air purifier is on.

LED Indicators

Working Status Indicator Status
Power On Power Indicator lights up white
Fan Speeds I, II, and III Indicators separately light up blue
Timers 2h, 4h, and 8h Indicators separately light up blue
Filter Change Needed Filter Change Indicator lights up red
Locked Lock Indicator lights up white
Sleep Mode On Sleep Mode Indicator lights up white
Night Light On Night Light Indicator lights up white
Display Off All indicator lights will dim
Ready for Wi-Fi Connection Wi-Fi Indicator light slowly flashes blue
Wi-Fi Connecting Wi-Fi Indicator light quickly flashes blue
Wi-Fi Connected Wi-Fi Indicator light shows solid blue

Pairing Your Smart Air Purifier with Govee Home App

Due to ongoing updates and improvements, Govee Home app’s interface and features may be slightly different than those shown in the manual. In case of differences, follow the in app instructions.

Pairing Steps

  1. To download the Govee Home App, scan the QR code or search “GOVEE” in the Apple App Store® (iOS devices) or Google Play Store (Android devices).
  2. Turn on your smartphone’s Bluetooth.
  3. Open the Govee Home App, tap the “+” icon in the top right corner, and search “H7121”.
  4. Tap the device icon and follow the on-screen instructions to complete pairing.

About the Filters

The air purifier uses a 3-stage filtration system to purify air.

About the Filters

Pre-Filter

  • Captures large particles such as dust, lint, fibers, hair, and pet fur.
  • Maximizes the filter’s life by protecting it from large debris.

H13 True HEPA Filter

  • Captures at least 99.97% of airborne particles 0.3 microns (µm) in size.
  • Filters small particles such as fine dust, smoke particles, pollen and pet dander.

Activated Carbon Filter

  • Physically adsorbs smoke, odors, and fumes.
  • Filters compounds such as formaldehyde, benzene, ammonia, hydrogen sulfide and volatile organic compounds (VOCs).

Clean Air Delivery Rate

  • This air purifier has a Clean Air Delivery Rate (CADR) of 120 cubic feet per minute (CFM), or 204m³/h.
  • CADR measures the efficiency of an air purifier by indicating the volume of clean air it purifies per minute. This is based on removal of dust, pollen, and smoke, which are the 3 most common indoor air pollutants. The higher the CADR, the more particles the air purifier will remove and the larger the area it can clean. The rating is measured at the air purifier’s highest speed.

Air Change Per Hour

  • The Air Change Rate is how many times all of the air in a room can be purified (or “changed”) by the air purifier in 1 hour. Air changes per hour are calculated on the recommended room size, assuming 8 ft / 2.4 m ceilings.
  • For smaller rooms, the air change per hour will increase. This air purifier has an air change per hour of 5, which means it can change air 5 times per hour at the max speed in a single, closed room up to 183 ft² / 17m². The air purifier is effective for larger rooms, but air purification will take longer, with fewer air changes per hour.
    Note: To effectively clean air, keep windows and doors closed while the air purifier is on.

Humidity
Moisture may damage the filters. This air purifier should be used in an area with a humidity level below 85% RH. If the air purifier is used in excessively humid areas, the surface of the filter may become moldy.

Essential Oils

  • Do not add essential oils to the air purifier or filter. The filter can be damaged by the oil and will eventually release an unpleasant smell.
  • Do not use diffusers near the air purifier.

Care And Maintenance

Cleaning Steps

  1. Unplug before cleaning.
  2. Wipe the outside of the air purifier with a soft, dry cloth. If necessary, wipe the housing with a damp cloth, then immediately dry.
  3. Vacuum the inside of the air purifier.

Replacing the Filter

The filter should be replaced every 6–8 months. You may need to replace your filter sooner or later depending on how often you use your air purifier.

Replacing Steps

  1. Unplug the air purifier. Flip the air purifier over and remove the bottom filter cover.
  2. Remove the old filter.
  3. Clean out any remaining dust or hair inside the air purifier using a vacuum hose. Do not use water or liquids to clean the air purifier.
  4. Unwrap the new filter and place it into the housing
  5. Reattach the cover. Plug in the air purifier.
  6. Reset the Filter Change Indicator.

Note:

  • To maintain the performance of your air purifier, only use official Govee filters. To buy replacement filters, visit Govee’s online store.
  • Remember to reset the Filter Change Indicator after changing the filter.

Filter Replacement Time Period

Using your air purifier in an environment with relatively high pollution may mean you will need to replace the filter more often, even if the Filter Change Indicator is off. You may need to replace your filter if you notice any of the following:

  • Increased noise when the air purifier is on
  • Decreased airflow
  • Unusual odors
  • A visibly clogged filter

Resetting the Filter Change Indicator

Filter Change Indicator

  • Press and hold Filter Change Button for 3 seconds. Filter Change Indicator will flash 3 times and then turn off once successfully reset.
  • Filter Change Indicator will light up as a reminder to replace the filter. Depending on how often you use the air purifier, the indicator should turn on within 6–8 months. You may not need to replace your filter immediately, but you should check the filter when Filter Change Indicator turns on.
  • If the filter was recently changed before Filter Change Indicator light up, reset the countdown again by pressing and holding Filter Change Indicator for 3 seconds.

Troubleshooting

The troubleshooting section below is for solving frequently asked questions for the purifier unit. If your problem persists, please contact customer support.

For Smart Air Purifier

Problem Possible Solution
Air purifier will notturn on or respond totouch controls. Plug in the air

purifier.Check to see if the power cord is damaged. If so, stop using the air purifierand contact Customer Support.Plug the air purifier into a different electrical outlet.The air purifier may be malfunctioning. Contact Customer Support.Make sure the filter’s plastic packaging is removed and is the filter isproperly installed.
Airflow is significantlyreduced.| Tap to increase the fan speed.Make sure there are at least 15 inches / 38cm of clearance on all sides of theair purifier.The pre-filter may be clogged by large particles, such as hair or lint, blockingair flow. Clean the pre-filter.Replace with a new filter.
Air purifier makes anunusual noise whilethe fan is on.| Make sure the filter is properly installed with its plastic packaging removed.Make sure the air purifier is operating on a hard, flat, level surface.Replace the filter .The air purifier may be damaged, or a foreign object may be inside. Stopusing the air purifier and contact Customer Support.Do not try to repair the air purifier yourself.Clean the filter or replace with a new filter if necessary
Strange smell iscoming from thepurifier.| Make sure not to use your air purifier in an area with high humidity or whilediffusing essential oils.

For App & Connectivity

  • Make sure the Bluetooth of your smartphone is enabled and your smartphone is not connected with other Bluetooth air purifiers.
  • Enable the smartphone’s Location Services.
  • Try connecting with another smartphone.
  • Make sure your App is the latest version.
  • Make sure you are connected to the 2.4GHz network, and confirm the network is working correctly.
  • Make sure the Wi-Fi password you entered is correct.
  • Shorten the distance between the air purifier, Wi-Fi router, and the smartphone.
  • Make sure your air purifier and the Wi-Fi router are located away from appliances that produce electromagnetic radiation (e.g. microwave ovens, refrigerators, etc.).

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. this device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

FCC Radio Frequency Exposure Statement

The device has been evaluated to meet general RF exposure requirements. The device can be used in fixed/mobile exposure condition. The min separation distance is 20cm.

QR CODE

FCC ID:2AQA6-H7121
The following importer is the responsible party
Name: GOVEE MOMENTS(US) TRADING LIMITED
Address: 13013 WESTERN AVE STE 5 BLUE ISLAND IL 60406-2448
Email: support@govee.com
Contact information: https://www.govee.com/support

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals