Hangzhou BA05 Treadmill for Home User Manual

TREADMILL
FOR HOME BA05

**** Please read this manual carefully and keep it properly before using the product!

SAFETY PRECAUTIONS

∨ Please read all instructions carefully before operating this product.
CAUTION: please adhere to the directives outlined below to prevent harm to yourself or others.

1. Prior to initiating use of the treadmill, ensure it is effectively grounded, thus mitigating potential risks and accidents.

2. Please start from suitable sport as excessive exercise may affect health.

3. (1) Consult a medical professional before commencing an exercise regimen.
   (2) Wear appropriate athletic shoes during exercise sessions (avoid running in slippers as they can become entangled with the machine, leading to malfunction).
   (3) Maintain a tidy surrounding to prevent dust particles from accumulating on the treadmill causing mechanical issues.

4. This particular model of the treadmill was designed for individual use only. Avoid proximity to children or pets at any time while treadmill is operational to avoid potential incidents.

5. When fully extended, provide a minimum clearance between the treadmill and the walls and furniture (at least three feet on each side).

6. Discontinue using the treadmill should the pawer cord be damaged.

7. Should the treadmill malfunction or sustain damage, it is imperative to cease use. We kindly request you reach out immediately to your local distributor far prompt repair service.

8. Refrain from touching any moving parts manually. Also, kindly refrain from jamming or forcing items into the mechanism of the treadmill.

9. The treadmill should only be utilized indoors, avoiding exposure to extreme outdoor temperatures or potentially unsanitary gym conditions.
   ∨  Please read all instructions carefully before operating this product.

10. Place the treadmill on clean and flat ground, keep the treadmill well ventilated, make sure there’ s no sharp obiect nearby.and do not use the treadmill near water and heat sources.

11. Do not get off before the treadmill stops completely.

12. Do not utilize the treadmill near respiratory equipment or aerosols or sprays causing a mist.

13. To sustain the optimal operation of the treadmill, do not install or attach any accessories or components that are not par of the original assembly provided by the manufacturer of the treadmill.

14. Ensure all components of the treadmill are assembled and secured property.

15. Always turn off the power supply and unplug the treadmill’s power cord following use.

PRODUCT INSTRUCTION

∨ Product Illustrations

V Technical Parameter

| BA05-A| 13A05-B1| BA05-B2| 13A05-C
---|---|---|---|---
Voltage (V)| 120| 120| 120| 120
Peak horsepower (HP)| 1.2| 1.5| 2.2| 2.4
Max Load (Ibs)| 165| 198| 243| 231
Folding Size (inches)| | | |
Product Size (inches)| 38.82 20.24 3.43| 42.76 20.24 3.43| 42.76 20.24 3.43| 46.70 20.24 3.43
Running Area (inches)| 15.55 31.50| 15.55 35.43| 15.55 35.43| 15.55 39.37
Speed (MPH)| 0.6-3.8| 0.6-3.8| 0.6-3.8| 0.6-5.0
Net Weight (lbs)| 39.68| 41.89| 42.99| 45.53

Locate the device model in the carton.
The above data is manual measurement, there may be some deviation, please refer to the actual received prevail.
∨ Parts Lists

No.| Name| Picture| Quantity|

Note

---|---|---|---|---
1| Main FrameMain| | 1 piece|
2| Power Cord| | 1 piece|
3| Remote control unit| | 1 piece|
4| Oil| | 1 piece|
5| L-type 6mm hex socket (dual purpose)| | 1 piece|
6| Screwdriver| | 1 piece|
7| Manual| | 1 piece|
8| After-sales service card| | 1 piece|
g| Quick & Easy Guide| | 1 piece|

RIRST USE GUIDANCE

1. Position the machine on a level surface with 19.7 inches of clearance at the front and rear.
2. Ensure the machine is balanced and the rubber pads are secure and touching the ground.
3. Plugin the power supply and turn on the machine.
4. Ensure the battery is properly installed at the back of the remote control, then press the “ON/OFF” button. Note that there will be a 3-second delay that will show on the panel before operation.
5. Start using the machine.

MANUAL GUIDELINES

Display and key
When the machine is running, luli window changes with the Window value display range the display window automatically switches every 5 seconds. The indicator light at the bottom of the display of the window. The information displayed in different Windows is as follows:

1. WIFI” window Display the WIFI indication. The icon will light up when the WIFI connection is successful.
2. “Bluetooth” window Display the Bluetooth indication. The icon will light up when the Bluetooth connection is successful.
3. “Speed” window The current speed value is displayed in the running state, and the speed is on.
4. “Time” window Display exercise time.
5. “Distance” window Display the moving distance.
6. “Calories” window Display the calorie consumption value.

Window value display range

Remote control

Remote control

1. Press the “Speed -” key to reduce the speed of the machine.
2. Press the “Speed +” key to increase the speed of the machine.
3. Press the “ON/OFF” button, and the machine will start or stop slowly.

Remote control

1. Press the “-” key to reduce the machine speed.
2. Press the “+” key to increase the machine speed
3. Press the “ON/OFF” button, and the machine will start or stop slowly.
4. Mode” for the mode selection key: in the choice of various modes can use the speed increase and decrease key to set the relevant countdown value, set the completion of the “ON/OFF” button to start the treadmill;
   While running, press the “Mode” button to pause the treadmill In the standby state, directly press the “ON/OFF” button, the treadmill would start to move at the speed of 0.6 miles/hr, other windows start counting up from 0, press “+’,”-” button to change the speed.

Startup Instructions

1. Stick the safety lock to the safety lock position on the panel Turn on the power switch puzzler will beep and the system will go to standby.
2. Press the START key, the window shows a 3-second countdown, and every minus buzzers beep, the motor will not start.
3. Start-up speed is: 0.6MPH, at this time you can press the speed + and-keys to adjust the speed
   Note: Remote control random distribution, please refer to the actual received one.

prerational Guidelines for the PitPat Application

https://www.pitpatfitness.com/pc/app/download

Note : system requirements: i0s13 or above ;android 6.0 orabove.

treadmillicon in the upper right corner

1. Waiting for the treadmill to connect
2. Searching for Wifi

Display “Green”to complete the connection
The treadmill supports a Bluetooth connection to your mobile device, allowing for comprehensive connectivity options. Simply:

1. Download the PitPat application onto your smartphone or scan the QR code scan for easy download.
2. Launch the PitPat software and navigate through the user prompts to register or login with your account.
3. Secure your workout equipment connection by following these steps:
   (1) Activate the Bluetooth function on your smartphone and ensure the location service is switched on as well.
   (2) Access the PitPat application and consent to any requested permits
   (3) Navigate to the home screen of your mobile device and tap the running machine icon located at the top right corner. This will direct you to the search interface within the program. Your phone will automatically detect nearby connected devices, including your treadmill with an identifier beginning with “PitPat-T”. Once detected, select your treadmill to establish a successful link. A single beep from your treadill indicates a completed connection, which is
   accompanied by brightening of the Bluetooth icon displayed onits panel display.
   Note that during this connection process, it’s essential to maintain an active internet connection on your smartphone in order to have full control over the treadmill via Bluetooth. The complete network configuration specifics can be found in the app description.

Reminder: If the treadmill is not connected to PitPat, the Bluetooth icon on the treadmill will be inactive. Conversely, if the treadmill has successfully linked with the app, the Bluetooth symbol shall be active on the machine.
User Guide for Configuring the WiFi Connection on Your Treadmill
Upon successful connection between your treadmill and the mobile app, you will be directed to the WiFi configuration screen of the treadmill. Please note that our model is exclusively compatible with a 2.4GHz frequency range (as indicated on the app, only the 2.4GHz WiFi signals detected on the treadmill will appear). Therefore, ensure that your internet access point can support 2.4GHz frequencies.

1. Identify the network you require to connect to.
2. Enter the required WiFi password as per onscreen instructions. upon establishment of a viable internet connection, the Bluetooth icon located on the display panel of the treadmill will illuminate, signifying that your application has returned to the primary homepage.
3. Note : In the event that the WiFi connection fails or is disrupted, wait until the WiFi signal stabilizes before restarting the treadmillin order to reconnect to the internet.

ERROR AND SOLUTIONS

∨  Error codes and Solutions

(1).Check for loose, disconnected or damaged communication cables.
(2).Check or replace the electronic panel if needed.
(3)•Check or replace the controller if needed.
Er 3| Overvoltage| (1).Check whether thevoltage of the power supply is at a normal level of AC 120V.
(2).Check or replace the controller.
(3).Check or replace the motor.
Er 4| Overcurrent| (1).Check for overload status.
(2).Check if any mechanical moving part is stuck.
(3).Check the level of film release agent. The lack of film release agent may increase the friction between the running belt and the running board, which causes overcurrent.
(4),Check the running board for severe wear.
(S).Check the running belt for severe wear.
(6).Check if any short circuit exists in the motor line. rf/Check or replace the controller. (6).Check or replace the motor.
Er 5| Overload| (1)•Check for overload.
(2).Check if any mechanical moving part is stuck.
(3).Check the level of film release agent. The lack of film release agent may increase the friction between the running belt and the running board, which causes overcurrent.
(4).Checkthe running board for severe wear.
(S).Check the running belt for severe wear.
(6).Check if any short circuit exists in the motor line.
(2).Check or replace the controller.
(6).Check or replace the motor.
Er 6| Motor is not connected| (1).Check for loose or disconnected lines for the motor.
(2).Checkor replace the controller.
(3).Assess the need to replace the controller.
Er 7| Communication failure, the controller cannot receive signals| (1).Check for loose, disconnected or damaged communication cables.
(2).Checkor replace the electronic panel.
(3)•Check or replace the controller.
Er 13| 1613T Short Circuit| (1).Ascertain whether the treadmill is experiencing severe interference from externalsignals.
(2). Examine or replace the controller if necessary.
Er 14| Load Short Circuit| (1).Check if there is any foreign object at the output of the controller that causes a short circuit.
(2).Checkor replace the motor.

SIN

| So block code| Old obstacle| Fault diagnosis|

solution

---|---|---|---|---
I| E02| Main motor open circuit| (1).       The main motor line is not connected or loose;
(2).        Main motor open circuit, damaged;
(3).        The controller is open and damaged.| (1).Re-reinforce the main motor connection wire;
(2). Replace the motor;
(3). Replace the controller.
2| E03| motor overvoltage protection| (1).The user’s power grid voltage is unstable, and the peak voltage Is very high;
(2).     Wheel diameter setting error;
(3).     The controller is damaged.| (1).  Need to increase the external filter regulator;
(2).  Reset the wheel diameter value to try not to exceed the rated voltage of the motor;
(3).  Replace the controller.
3| E05| Overcurrent protectIon| (1). Heavy load;
(2).The motor or roller has a foreign body stuck;
(3). The roller is not lubricated enough. and the resistance Increases;
(4). The controller is damaged.
(5). Motor damage resistance increases;| (1).Reduce the load, try not to exceed the rated load;
(2). Remove stuck foreign bodies;
(3). Add lubricant;
(4). Replace the controller.
(5). Replace the motor;
S/N| So block code| Old obstacle| Fault diagnosis|

solution

---|---|---|---|---
4| E06| Communication error| (1). The main cable connector of the upper and lower controller is loose.
(2). The main cable of the upper and lower controller is broken.
(3). The electronic watch is broken; (4).The controller is damaged.| (1). Harden the cable port.
(2).  Replace the main cable of the upper and lower controller.
(3).  Replace the electronic watch;
(4).  Replace the controller.
5| Eoc| Power tube breakdown Explosion protection| (1). Power transistor breakdown, controller damage;| (1). Replace the controller.

v Belt Adjustment

1. When running belt leans to the left, adjusting screw on the left 1-2 turns clockwise. Then, test running; If the running belt still leans to the left, repeat the above steps until the running belt is aligned.
2. When running belt leans to the right, adjusting screw on the right 1-2 turns clockwise. Then, test running; If the running belt still leans to the right,repeat the above steps until the running belt is aligned.
3. When the running belt gets too tight it will cause stronger resistance. Please adjust both sides screws 1-2 turns counterclockwise, loosen the belt until stopping skidding or pausing; When the running belt too loose, please adjust both sides screws 1-2 turns along the clockwise.

Warning! Do not overtighten the rollers! It may cause permanent damage to the bearing!

MAINTENANCE

Maintenance Guidance
Proper maintenance helps keep the treadmill in the best condition while improper maintenance may damage or shorten the life span of the treadmill.

1. Regularly clean and maintain the treadmill, ensuring all components are kept immaculate.
2. After each use of the treadmill, employ a pristine towel or cloth to wipe down vital areas such as the console, depleting sweat and debris. Take care not to allow electrical elements or running belt to come into contact with water.
3. Seek to position your treadmill in an area that is clean, dry and free from moisture. Ensure it is powered off and disconnected from its socket prior to storage.
4. Ease of transportation is incorporated within this product, equipped with wheels for seamless relocation. Prior to shifting the treadmill, ascertain it is unplugged and correctly folded.
5. Conduct constant checks on the individual parts of the treadmill and ensure they are securely fastened. Components exhibiting signs of damage should be swiftly replaced.
6. Prior to commencing exercise, the running belt has been appropriately adjusted; however, with continuous usage, there maybe varying degrees of stretching experienced by the belt.
   This may result in wearing out the belt due to its deviation from the center and friction with the side roller and rear cover. Belt slippage over time is common. If the running belt slips or gets stuck during movement on the treadmill, you can adjust the belt for better performance.

Lubricant

1. The treadmill must be lubricated after half a year or a cumulative run of 100 hours, add 1/3 to 1/2 bottle at a time.

2. Confirm the lubrication status. With the treadmill off, lift the running belt from one side and reach for the surface under the running belt, and if the lubricant can be touched, there is no need to add more lubricant. But if the lubricant dries up, refill it with it. (Use only non-petroleum-based lubricants).

3. Follow the figure below to properly add the lubricant.

4. Clean the treadmill.

5. Turn off the power, lift the running belt and apply silicone oil to the inner surface.

6. Start the treadmill and lubricate at 3 mph for 10-20 seconds.

WORKOUT ROUTINES

Warm-up
Awarnv-up exercise of 5-10 minutes is required before each operation.
Breathing
Do not hold your breath during the operation. Normally, when you are ready to restore your movements, breathe through your nose and exhale with your mouth. Breathing should be coordinated with your movements. If you breathe too quickly, you should imme diately stop exercising.
Frequency
Muscles in the same area should have 48 hours of rest, that is, the same area can be trained the next day.
Load
According to the individual physical condition to determine the amount of training, and then exercise according to the principle of asymptotic load, muscle soreness is normal at the beginning of training, as long as you continue the exercise, soreness can be eliminat- ed.
Relax
Five minutes of restoring action should be taken after each exercise, especially when the foot muscles are stretched and relaxed to prevent long- term coagulation and maintain muscle elasticity.
Diet
In order to protect the digestive system, you can exercise one hour after a meal. After training, you should eat at least half an hour. During exercise, you should drink less water, especially large amounts of water, so as to avoid increasing the burden on the heart and kidney.
Exercise Guidelines and Recommendations
DECLARATION OF CAUTION: Prior to commencing this or any exercise regimen, itis imperative that you consult your health care professional.
Warm up exercises enhance blood circulation, providing muscles with increased oxygenation, elevation in body temperature, and preparation for the physical exertion to follow.
Each training session should initiate with a five to ten minutes stretch routine and light movements warmup. The accompanying illustrations showcase various fundamental stretches.
The recommended approach is to undertake a warm-up session prior to executing your workout. For comprehensive warm-up benefits, repeat each stretch for three consecutive sets.

1. Stretch down:
   Bend your knees slightly with your body stretch down slowly, let your back and shoulders relax, and try to exten your hands to touch your toes. Hold for 10-15 seconds and take a break for a few seconds. Repeat 3 imes.

2. Hamstring stretch:
   Sit down ona clean cushion, frighten one leg and place the other leg inward towards the thigh and snug on the inside of the straightened leg. In the meantime, try to touch the toes of your straitened le5 with the hand at the same side. Hold for 10-15 secands and take a break for a few seconds. Repeat 3 times for each leg.

3. Calf and Achilles Tendon Stretches:
   Place both hands against the wall while standing with ane foot behind the other, keeping your back leg straight and both heels planted on the ground while leaning against the wall. Hold for 10-15 seconds and take a break for a few seconds. Repeat 3 times for each leg.

4. Quadriceps Stretch:
   Hold your body steady with your left hand holding against the wall and right hand reaching back to grab your right heel and pull it slowly towards your hips, until you feel the muscle tightness at the front side of your thigh. Hold for 10-15 seconds and take a break for a few seconds. Repeat several times for each leg.

5. Sartorius (muscle of inner thigh) Stretch: Sit on the floor with your two feet holding against each other and your knees pointing to the opposite directions, grab your feet with your hands and pull them toward your grain. Hold for 10-15 seconds and take a break for a few seconds. Repeat 3 times.

SERVICE COMMITMENT

This product is exclusively intended for domestic applications. Any anomalies associated with commercial usage will not be subject to our warranty coverage.
If you experience any issues with the functionality of your product, kindly liaise with your local distributor regarding customer support!

FCC Wamning

“This device complics with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any inte reference received, including interference that may cause undesired operation Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FOC Rules. These limits are  designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause hamful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause hamful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or mare of the following measures:

• Reorient or relocate the re iing antenna.
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
• Consult the dealer or an experienced radio/ TV technician for help.

Radiation Exposure Statement
“This equipment complis with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated vith minimum distance 20cm between the radiator and your body.

Support Service: +1 888-318-4777
Email: [email protected]
+1888-318-4777
[email protected]

https://h5.pitpatfitness.com/#/erp/pitpath5

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>