MORRIS S77094EDF Chest Freezer User Manual

MORRIS S77094EDF Chest Freezer

Important safety instructions (SAFETY WARNINGS)

•  This warning is not for EUROPEAN market:  This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

•  This warning is only for EUROPEAN market only: This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
  Children aged from 3 to 8 years are allowed to load and unload refrigerating appliances

•  Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.

•  If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.

•  Please abandon the freezer according to local regulations for its flammable blowing gas. Before you scrap the appliance, please take off the doors to prevent children trapped.

•  WARNING – Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.

•  WARNING – Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer

•  WARNING – Do not damage the refrigerant circuit.

•  WARNING – Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.

•  The LED lamps can only be replaced by the manufacturer for models with LED lamp, can’t be replaced by the user.

•  WARNING –When positioning the appliance, ensure the supply cord is not trapped or damaged.

•  WARNING –Do not locate multiple portable socket-outlets or portable power supplies at the rear of the appliance.

  •  This appliance is intended to be used in household and similar applications such as- staff kitchen areas in shops, offices and other working environments.
  •  farm houses and by clients in hotels, motels and other residential type environments.
  •  bed and breakfast type environments.
  •  Catering and similar non-retail applications.

To avoid contamination of food, please respect the following instructions:

•  Opening the door for long periods can cause a significant increase of the temperature in the compartments of the appliance.
•  Clean regularly surfaces that can come in contact with food and accessible drainage systems.
•  Clean water tanks if they have not been used for 48 h; flush the water system connected to a water supply if water has not been drawn for 5 days.
•  Store raw meat and fish in suitable containers in the refrigerator, so that it is not in contact with or drip onto other food.
•  One-, two- and three-star compartments are not suitable for the freezing of fresh food.
•  If the refrigerating appliance is left empty for long periods, switch off, defrost, clean, dry, and leave the door open to prevent mould developing within the appliance.

NOTE: Our products only store packaged frozen food and not suitable for refrigerated bulk food

Transportation and Placement

•  When transporting the chest freezer from one place to another, the inclination of the cabinet should not exceed 45 degrees, for prevention against compressor or system damage.

•  The position you select for the refrigerator (chest freezer) installation should be well-ventilated and has less hot air. Do not locate the refrigerator (chest freezer) near a heat source such as cooker, boiler, and avoid it from direct sunlight, thus guaranteeing the refrigeration effect while saving energy consumption. Do not locate the refrigerator in the damp place, so as to prevent the refrigerator (chest freezer) from rusting and leaking electricity. The result of the total space of the room in which the refrigerator (chest freezer) is installed being divided by the refrigerant charge amount of the refrigerator shall not be less than 8 m3/g.
  Note : The amount of refrigerant charged for the refrigerator (chest freezer) can be found on the nameplate.

•  Before use, remove all the packing material. The back side of the refrigerator (chest freezer) should be placed to face to the wall and more than 5cm away from the wall, both flank sides more than 10cm. Please prevent people touch hazardous components of the back.

Note ：Figure 1, Figure 2, Figure 3 only as a product space demand size schematic diagram.

•  The freezer should be put in well-ventilated, dry place. Don’t use it under direct sunshine. The freezer should be kept away from water sink, heat source and any volatile, corrosive material.
•  If the equipment cannot be used anymore, please do not throw it away freely, it is necessary to be sent to a qualified organization for further professional disposal.
•  This appliance is intended to be used in household and similar applications such as: home use.

Product Features

Power and Running

•  Single-phase power supply, 50Hz, voltage range 220~240V. If the voltage is unstable, please install a voltage stabilizer with capacity above 1000W.
•  Avoid turning on and off the power too frequently. If the power is turned off, wait an interval of 5 minutes before turning it on again.
•  When the freezer will be out of use for a long time, disconnect the power first, then clean it. Please examine the circuit whether it is excellent before reuse.

Climate Range
The information about the climate range of the appliance is provided on the rating plate. It indicates at which ambient temperature (that is, room temperature, in which the appliance is working) the operation of the appliance is optimal (proper).

Note ：Given the limit values of the ambient temperature range for the climate classes for which the refrigerating appliance is designed and the fact that the internal temperatures could be affected by such factors as location of the refrigerating appliance, ambient temperature and the frequency of door opening, the setting of any temperature control device might have to be varied to allow for these factors, if appropriate. If the power cable is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

Electrical Connection

WARNING

•  This appliance should be properly grounded for your safety. The power cord of this appliance is equipped with a three-prong plug which mates with the standard three prong wall outlets to minimize the possibility of electrical shock. Do not, under any circumstances, cut or remove the third ground prong from the power cord supplied. This refrigerator appliance requires a standard 220-240VAC 50Hz electrical outlet with three-prong ground. This refrigerator appliance is not designed to be used with an inverter. The cord should be secured behind the appliance and not left exposed or dangling to prevent accidental injury.
•  Never unplug the refrigerator (freezer) by pulling the power cord. Always grip the plug firmly and pull straight out from the receptacle.
•  Do not use an extension cord with this appliance. If the power cord is too short, have a qualified electrician or service technician install an outlet near the appliance. Use of an extension cord can negatively affect the performance of the unit.Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is damaged, have it replaced by an authorized service center.

Temperature button controls the temperature inside the box

Turn up the temperature button

•  Temperature down button
•  FAST FREEZING INDICATOR

Quick-frozen button
DIGITAL TEMPERATURE DISPLAY

FUNCTION INSTRUCTION

Setting Temperature:

•  Press the temperature setting key to set or adjust the temperature.
•  Temperature can be set between -14℃ ~ -26°℃Recommended temperature setting is -18oC

Food storage

•  Before use the cabinet, pls turn the control knob to”7” and keep the cabinet running for 4 hours. Then turn the knob to the factory settings for use.
•  There must be space between the foods stored in the cabinet, between the foods and the inner surface of the cabinet, so as to keep good ventilation of cold air and freeze evenly. Do not put in any bottled or canned beverage with freezing point above the temperature in the cabinet when it is below zero.
•  For foods that should be moisture-free or lose water easily, wrap them up with hermetical food bags or fresh films before putting in the cabinet for the sake of avoiding smell-mixing and reducing frosting.
•  Storage of volatile and combustible gases, liquids such as strong alkalis, strong acids, petrol ,etc. are forbidden.

Use of the frozen food storage compartment
The freezer temperature is controlled below -18 ℃, and it is advisable to store the food for long-term preservation in the freezer compartment, but the storage duration indicated on the food packaging should be adhered to. The freezer drawers are used to store food that needs to be frozen. Fish and meat of large block size should be cut into small pieces and packed into fresh- keeping bags before they are evenly distributed inside the freezer drawers.

•  Allow the hot foods to cool down to the room temperature before putting them in the freezer compartment.
•  Do not put a glass container with liquid or the canned liquid that is sealed in the freezer compartment, so as to avoid burst due to volume expansion after the liquid gets frozen up.
•  Divide the food into appropriately small portions
•  You’d better pack the food up before freezing it, and the packing bag used should be dry, in case the packing bags are frozen together. Foods should be packed or covered by such suitable materials as are firm, tasteless, impervious to air and water, non-toxic and pollution-free, to avoid cross-contamination and transfer of odor.

Tips for shopping the frozen foods

1.  When you are buying frozen food, look at the Storage Guidelines on the packaging. You will be able to store each item of frozen food for the period shown against the star rating. This is usually the period stated as “Best to use them before×”, found on the front of the packaging.
2.  Check the temperature of the frozen food cabinet in the shop where you buy the frozen foods.
3.  Make sure the frozen food package is in perfect condition.
4.  Always buy frozen products last on your shopping trip or visit to the supermarket.
5. Try to keep frozen food together whilst shopping and on the journey home, as this will help to keep the food cooler.
6.  Don’t buy frozen food unless you can freeze it straight away. Special insulated bags can be bought from most supermarkets and hardware shops. These keep the frozen foods cold longer.
7.  For some foods, thawing before cooking is unnecessary. Vegetables and pasta can be added directly to boiling water or steam cooked. Frozen sauces and soups can be put into a saucepan and heated gently until thawed.
8.  Use quality food and handle it as little as possible. When foods are frozen in small quantities, it will take less than for them to freeze up and thaw.
9.  Estimate the amount of foods to be frozen up. When freezing large amounts of fresh food, adjust the temperature control knob to the low mode, with the freezer temperature lowered. So, foods can be frozen up in fast manner, with the food freshness well kept.

Maintenance and cleaning

•  The freezer should be cleaned regularly. When cleaning, turn off the power, take out the foods in the cabinet, clean the inside using water or a little neutral detergent.
•  Do not use boiling water, acid, chemical diluents, petrol and oil, or dirt-removing powder.
•  Dry it after cleaning.
•  Use light soap water when cleaning the door seal, apply a little of talcum powder on it after natural drying to extend its service life.
•  Use soft cloth with water or a little detergent to clean the out surface. Note, keeping the power supply and lower part of connect wires away from water to avoid electricity leakage.
•  Except common breakdowns, those who are not service technician should not take apart and repair the freezer on their own so as to avoid worsening the trouble. Unauthorized repair of electrical part such as compressor, temperature controller is forbidden.

Before cleaning, unplug the power plug first; Do not plug in or plug out the plug with wet hand, because there is a risk of electric shock and injury. Do not spill water directly on the refrigerator (freezer), to avoid rust, electricity leakage and accidents. Do not stretch your hands into the bottom of the refrigerator (freezer), since you might be scratched by sharp metal corners. Internal cleaning and external cleaningThe food residuals in the refrigerator (freezer) are liable to produce bad odor, so the refrigerator (freezer) must be cleaned regularly. The fresh food compartment is usually cleaned once a month. Remove all shelves, crisper box, bottle racks, cover board, and drawers etc., and clean them with a soft towel or sponge dipped in warm water or neutral detergent. Clear off the dusts accumulated on the rear panel and side plates of the refrigerator often. After using detergent, be sure to rinse it with clean water, and then wipe it dry. Do not use bristle brush, steel wire brush, detergent, soap powder, alkaline detergent, benzene, gasoline, acid, hot water and other corrosive or soluble items to cleanse the cabinet surface, door gasket, plastic decorative parts, etc., so as to avoid damage. Carefully wipe dry the door gasket, clean the groove using a wooden chopstick wrapped with cotton string. After the cleaning, fix the four corners of the door gasket first, and then embed it segment by segment into the door groove. Interruption of power supply or failure of the refrigerating system

•  Take care of the frozen foods in the event of an extended non-running of the refrigerating appliance (such as interruption of power supply or failure of the refrigerating system).
•  Try to open the refrigerator (freezer) door as less as possible, in this way can food safely and freshly kept for hours even in hot summer.
•  If you get the power outage notice in advance
  •  Adjust the thermostat knob to the high mode an hour in advance; so that foods get fully frozen (Do not store new food during this time!). Restore the temperature mode to the original setting when power supply becomes normal in a timely manner.
  •  You can also make ice with a watertight container and put it in the upper part of the freezer, so as to extend the time for fresh food to be stored.

Defrosting
After a period of use, a thin layer of frost will be formed on the freezer compartment inner wall (or evaporator) surface, which may affect the refrigeration effect if exceeding 5mm in thickness. In such case, you need to gently scrape the frost off using an ice scraper rather than the metal or sharp hardware. Frosts need to be cleared off every 3 months or so, and if the normal use of drawers and normal access of foods are affected by frosting, make sure to remove the frosts in a timely manner. Follow the following steps to remove frosts: 1、Take out the frozen foods, shut off the mains power supply, open the refrigerator door, and gently remove the frosts from the inner wall with an ice scraper. To speed up the thawing process, you are suggested to place a bowl of hot water inside the refrigerator/freezer, and when the solid ice frosts become loose, use an ice scraper to scrape them off and then take them out. After defrosting, clean the refrigerator/freezer inside, and switch on the power supply.

Changing the lamp
The LED lamp is used by the refrigerator for lighting, which features low energy consumption and long service life. In case of any abnormality, please contact the after-sales personnel for visiting service. The lamps can only be replaced by the manufacturer, together with a part of the appliance.

The following are not faults and Defrosting

•  When the freezer is working or after is stops for a while, the refrigerant in the pipes is cycling and gives out＂running water＂sounds.
•  The surface temperature of the compressor may be up 70℃~95℃ when it is working.
•  The back side of step freezer gives out heat.
•  In rainy season, the outer surface of the cabinet may have dew, which makes no defects on normal use. Just dry it with a piece of cloth.
•  Defrost for better freezing efficiency when the frost film in the cabinet is 4-5mm thick.
•  When thawing, turn off the power, take out the frozen food, open the door and let it melt naturally. Wash with water and a soft cloth.
•  Do not use sharp metal tools such as steel brush to clean the frost film when defrosting so as to avoid evaporator

Troubleshooting

With regard to the following small faults, not every failure needs to be fixed by the technical service personnel; you can try to solve the problem

The indicator is not on.

The compressor doses not start.

| The plug isn’t connected to the socket really.| Re-plug it.
no power| Connect the socket with power.
The indicator is on ,but the com- pressor doesn’t

work and buzzes only

| The power voltage is＜187V.|

Put a power regulator more than 1000W power together.

The compressor stops a minute after start, and

restart after a few minutes, and so repeatedly.

| The power voltage is＞242V.

The compressor works normally, but the temperature in the cabinet lowers too slowly.

| The door is opened too frequently.| Reduce open times.
The food in the cabinet is too much, and placed improperly.| Place foods properly keep place between them for ventilation of

cold air.

The frost film is too thick.| Take out foods and defrost.
The surface of the condenser is too dirty.| Stop and clean the condenser.
The door seals badly.| Adjust the door seal.

The noise is too loud

| The freezer is placed unstably.| Place it stably.
The fixing of the freezer is loose.| Tighten the fixing.
there’s contact between pipes.| Separate them.

Note : If the above descriptions are inapplicable to troubleshooting, do not disassemble and repair it yourself. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact the local store where your purchase was made. This product should be serviced by an authorized engineer and only genuine spare parts should be used.When the appliance is not in use for long periods, disconnect from the electricity supply, empty all foods and clean the appliance, leaving the door ajar to prevent unpleasant smells.

Locks
If your Refrigerator (freezer) is fitted with a lock, keep the key out of reach and not in the vicinity of the appliance to prevent children being entrapped. When disposing of an old Refrigerator (freezer), break off any old locks or latches as a safeguard.

Warranty Information

The manufacturer provides warranty in accordance with the legislation of the customer’s own country of residence, with a minimum of 2 years, starting from the date on which the appliance is sold to the end user. The warranty only covers defects in material or workmanship. The repairs under warranty may only be carried out by an authorized service centre. When making a claim under the warranty, the original bill of purchase (with purchase date) must be submitted. The warranty will not apply in cases of:

•  Normal wear and tear
•  Incorrect use, e.g. overloading of the appliance, use of non-approved accessories
•  Use of force, damage caused by external influences
•  Damage caused by non-observance of the user manual, e.g. connection to an unsuitable mains supply or non-compliance with the installation instructions
•  Partially or completely dismantled appliances

Tips for special needs

Moving the refrigerator/freezer

Location
Do not place your refrigerator/freezer near a heat source, e.g. cooker, boiler or radiator. Avoid it from direct sunlight in out-buildings or sun lounges.

Leveling
Make sure to level your refrigerator/freezer using the front leveling feet. If not level, the refrigerator/freezer door gasket sealing performance will be affected, or even it may lead to the operating failure of your refrigerator/freezer.
After locating the refrigerator/freezer in position, wait for 4 hours before using it, so as to allow the refrigerant to settle.

Installation
Do not cover or block the vents or grilles of your appliance. When you are out for a long time

•  If the appliance will not be used for several months, turn it off first, and then unplug the plug from the wall outlet.
•  Take out all foods.
•  Clean and dry the interior thoroughly. To prevent odor and mold growth, leave the door ajar: block it open or have the door removed if necessary.
•  Keep the cleaned appliance in a dry, ventilated place and away from the heat source, place the appliance smoothly, and do not place heavy objects on top of it.
•  The unit should not be accessible to child’s play.

Certifications

Electrical information This electrical appliance must be grounded This product is equipped with a plug, which is suitable for all houses equipped with sockets meeting the current specifications If the fitted plug is not suitable for your socket outlets, it should be cut off and carefully disposed of. To avoid a possible shock hazard, do not insert the discarded plug into a socket. This product complies the EEC directives

Warnings for disposal

•  Refrigerant and cyclopentane foaming material used for the refrigerator are flammable. Therefore, when the refrigerator is scrapped, it shall be kept away from any fire source and be recovered by a special recovering company with a corresponding qualification other than be disposed of by combustion, so as to prevent damage to the environment or any other harm.
•  When the refrigerator is scrapped, disassemble the doors, and remove the gasket of door and shelves; put the doors and shelves in a proper place, so as to prevent trapping of any child.

Disposal
Old appliances still have some surplus value. An environmentally friendly approach will ensure that valuable raw materials are recycled. The refrigerants used in your equipment and insulation materials require special handling procedures. Make sure there is no pipe damage on the back of the equipment before handling. Up-to-date information on the options for disposing of old equipment and packaging from old equipment can be obtained from the local municipal office.This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal，recycle it responsibly to promote the sustainable reuse of material resources. To return your used device. Please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

Access to professional repair, such as internet webpages, addresses, contact details； Aftersales service station list：

Note : The address or contact phone number of the service site is subject to change without prior notice. Please confirm whether the service station is a directly affiliated one of our company when requiring services.

You can access the product database where the model information is stored by scanning the QR code on the energy label.

NOTICE ABOUT RECYCLING
Your product is designed and manufactured with high quality materials and components which can be recycled and reused. This symbol means that electrical and electronic equipment, at their end-of-life, should be disposed of separately from your household waste. Please dispose of this equipment at your local community waste collection/ recycling centre. In the European Union there are separate collection systems for used electrical and electronic products. Please help us to conserve the environment we live in!

DECLARATION OF CONFORMITY

Herewith, we state that this product, complies with the requirements of below directives:

• EMC-Directive: 14 / 30 / EU
• Low Voltage Directive: 14/ 35 / EU
• ErP Directive 09 / 125 / EC
• CE Marking: 93 / 68 / EEC RoHS Directive: 11 / 65 / EU & Delegated Directive (EU) 15 / 863 The detailed declaration of conformity can be found at www.morris.gr

IMPORTER:
Kalliopi Karyda & Co, LP 87 A, 17th November str. 55535, Pylea, Thessaloniki Tel. 2316 006600 Fax. 2316 006650 www.morris.gr

References

• Home - Morris

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>