LUMASCAPE FAISCA F3 LS9230 Instruction Manual
- June 9, 2024
- LUMASCAPE
Table of Contents
FAISCA F3 LS9230
Instruction Manual
FAISCA F3 LS9230
| MODEL | LS9230 |
|---|---|
| PART NUMBER | LS9230 – xD xxx x xx xx xxx x xx xx xx xx |
| INSTALLATION TYPE | MARKER PIXEL |
| IP RATING | IP66/67 (Passes IP68 Test) |
| SUPPLY VOLTAGE | 30-48 Vdc ~ |
| INSTRUCTIONS COVER | PowerSync™, Non-Dimmable |
| DIMENSIONS (LxWxH) | Refer to included drawings |
| WEIGHT | 1.1 lbs (0.5 kg) per node Cable not included |
Tools Required
Included Components
| Do Not Lift or Carry By the Cord
---|---
| Do Not Use Power Tools on Screws
| Keep Electronics Free From Dirt and Moisture
| Keep Away from Flammable Materials
| Do Not Hose or Pressure Clean
| Do Not Use Silicone On Outside Surface
| Do Not Cut Cable to the Luminaire
CAUTION Risk of Electric Shock
Please read and follow all safety instructions carefully.
Failure to do so will void warranty.
WARNING – Product Warranty is void if product is not installed as per installation instructions and in compliance with all local and provincial codes.
› Ensure installation complies with local electrical rules and regulations.
› All electrical work must be performed by a licensed electrician.
› Class III product SELV (symbol 3).
› For LED Options 2,700K, 3,000K, Red, Green, Blue, RGBA, RGBW, Tunable White:
This product contains a light source of energy efficiency class G.
› For LED Options 3,500K, 4,000K, 5,000K: This product contains a light source
of energy efficiency class F.
› All luminaires may become hot. Use discretion on where the luminaire is
mounted. Take care when setting luminaire as it may become hot.
› Luminaire should only be used complete with protective shield. If protective
shield is cracked, immediately stop using luminaire. Isolate light source,
keep it dry and immediately contact Lumascape for replacement of protective
shield (symbol 10).
› If the external flexible cable or cord of this luminaire is damaged, it
shall be exclusively replaced by Lumascape or their service agent in order to
avoid a hazard.
› The light source contained in this luminaire shall only be replaced by
Lumascape or their service agent.
› To reduce the risk of strangulation the flexible wiring connected to this
luminaire shall be effectively fixed to the wall if the wiring is within arm’s
reach.
› Ensure mains input power is surge protected.
› Never make or break connections while the circuit is energized.
› Do not make modifications or alter the product.
› Keep luminaire clean and free of debris.
› Only clean with warm water.
› Do not use chemicals or abrasives to clean luminaire as this may void the
product warranty.
› Connections are to be kept clean and dry at all times.
› Suitable for use indoors or outdoors.
Assembly Instructions
ADJUSTABLE
CATENARY
SURFACE
STRAP
SCREW MOUNT
Suitable for use on custom brackets.
Wiring Designations
PowerSync (6-Core)
| Designation | Color |
|---|---|
| Positive | Red |
| Negative | Black |
| Data + | Orange & White |
| Data – | Orange |
| Data GND | Green & White |
| Data GND | Green |
Do not Hi-Pot test
Mounting
Montage
Dimensions
Type S: Surface Mount (Side Entry Only)| Type A: Adjustable Bracket (Side
Entry Only)
---|---
|
Type C: Catenary Mount (Side Entry Only)| Type F: Strap Mount (Side Entry
Only)
|
Type D: Screw Mount (Side and Bottom Entry)
Note:
No mounting bracket is supplied.
4 x M4 screw points are provided for attaching to custom mounting plates and
hardware.
Find more product resources at lumascape.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>