AES GLOBAL E-KP Wireless E-Keypad Instructions
- October 29, 2023
- AES GLOBAL
Table of Contents
SIMPLE AND SECURE
433.39 MHz Transceiver.
Waterproof housing.
Operates from a single coin cell 2450 lithium Battery.
Can be unlocked and used as an Entry button.
Simple 4 to 8 pin code operation.
Compatible with any E-transceivers or gate controller.
Coding remote
NOTE: e-Keypad will come in unlocked mode and it must be in this mode to code into Transceiver.
- Put Transceiver into Code Learn (refer to Transceiver instructions).
- On the e-Keypad, press the OPEN button once and release, then press it a second time and release. The eKeypad is now coded.
Activate e-Keypad
- 1To Activate e-Keypad, press and hold button 4 for 5 seconds. The ‘Lock’ LED will illuminate, then after 3 seconds, it will turn off.
2. You can now operate the e-Keypad by entering default code 1221, then pressing the OPEN button.
3. To unlock e-Keypad, press and hold button 2 for 5 seconds, the ‘Lock’ LED will display, as well as the ‘Code’ LED.
4. Now enter your code and press OPEN. The ‘Unlock’ LED will illuminate, then after 3 seconds exit lock mode. The OPEN button will now activate the door or gate without entering code.
Changing access code
- To change access code, press and hold button 1 for 5 seconds. The ‘Menu’ LED will illuminate as well as the ‘Code’ LED.
- Enter default code 1221, then press OPEN and the ‘Code’ LED will flash. Now enter new code (a minimum of 4 numbers and maximum of 8 numbers can be entered – for example 341323).
- Now press OPEN and the ‘Con’ LED will flash. Re-enter code (e.g, 341323) and press OPEN again.
If the changed code is successful, the ‘Code’ LED will come on solid for 3
seconds, then exit the coding sequence. If the code is unsuccessful, both the
‘Code’ LED and ‘Con’ LED will flash 3 times, then exit the coding sequence. In
this instance, the access code will revert back to the original code.
NOTE: If you forget your pin code you will need to call tech support for
assistance. The system will require a factory reset to set it back to its
original settings.
E. sales@aesglobalonline.com
T: +44 (0) 288 639 0 693
www.aesglobalonline.com