IPC-S22FP-IMOU 1080P H.265 Wi-Fi P&T Camera Cruiser User Guide
- June 5, 2024
- imou
Table of Contents
Quick Start Guide
Version 1.1.0
1.2.51.32.17527-000 …
Package Content
Camera Introduction
Disconnect the camera from the power before installation or taking out its SD card.
- Press and hold the reset button for 10 s to reset the camera.
- Double-press the reset button to enable camera’s hotspot.
See the table below for definitions of camera’s LED behaviors.
| LED Indicator Status | Device Status |
|---|---|
| Off | • Power off/LED turned off |
• Rebooting after reset
Solid red| • Booting
• Device malfunction
Flashing red| • Network connection failed
• Pairing falied
Flashing green| • Ready for network configuration
• Ready to pair
Solid green| Operating properly
Flashing green and red alternately| Updating firmware
Setting up Camera
Follow the steps below to add the camera to your Imou account.
Step 1 Scan the following QR code or search “Imou Life” in Google Play or App Store to download and install the app.
If you already use the app, make sure that you are using the latest version.
http://mobile.easy4ipcloud.com/imou/detect.html
Step 2 Launch the app. Then create an account if you are a new user.
Step 3 Connect the camera to power source with the power adapter.
Step 4 After the camera boots up, the LED indicator light flashes green
(wire-free camera) or is on solid green (wired camera).
If the LED indicator status goes wrong, reset the camera.
Step 5 Follow the on-screen prompts to add the camera. Repeat the adding
process if you have multiple cameras.
Installing Camera
Make sure that the mounting surface is strong enough to hold at least three times the weight of the camera and the bracket.
Step 1 Peel off the U-shaped mounting template and stick it to the
desired installation area.
Step 2 Drill holes into the mounting surface as the mounting template
marks and then insert wall anchors as needed.
About the Manual
- This manual is for reference only. The operation of the actual product shall prevail if there is any inconsistency.
- All the designs and software are subject to change without prior written notice.
- All trademarks and registered trademarks mentioned are the properties of their respective owners.
- Please visit our website or contact your local customer service if there is any problem when using the device.
- If there is any uncertainty or controversy, we reserve the right of final explanation.
Step 3 Secure the mounting bracket to the surface with included mounting
screws.
Step 4 Align on the top of the camera with on the bracket, then fit the
two parts together.
Step 5 Rotate the camera counterclockwise until it is locked. Make sure
align with .
Step 6 Power on the camera and then adjust its angle properly.
Step 1 Peel off the rectangular mounting template and stick it to the
desired installation area.
Step 2 Drill holes into the mounting surface as the mounting template
marks and then insert wall anchors as needed.
Step 3 Secure the mounting bracket to the surface with included mounting
screws.
Step 4 Align on the top of the camera with on the bracket, then fit the
two parts together.
Step 5 Rotate the camera counterclockwise until it is locked. Make sure
align with .
Step 6 Power on the camera and then adjust its angle properly.
Pole Mount
- Make sure that the pole is strong enough to hold at least three times the weight of the camera and the bracket.
- The hoops are not provided. Please prepare them in advance.
Step 1 Thread the hoop through the mounting holes on the bracket, then
attach the bracket to the pole .
Step 2 Align on the top of the camera with on the bracket, then fit the
two parts together.
Step 3 Rotate the camera counterclockwise until it is locked. Make sure
align with .
Step 4 Power on the camera and then adjust its angle properly.
FAQ
Q: The device cannot boot up or work as expected?
Check the LED indicator status. If the light is not in green, press and hold
the reset button for 10 s to reset the camera.
Q: How to connect the camera to another Wi-Fi network?
- If the camera is online, select Device Details > Network Config to change the Wi-Fi connection on the app.
- If the camera is offline, reset the camera, and then configure the camera again.
Q: Connection takes too long?
- Check if the distance between the camera and the router, and that between the camera and the smart phone is both within 5 m (16.4 ft) during the connection.
- Check the Wi-Fi configuration of the router: Select the channel to auto, and the mode to 11bgn mixed.
Q: When the micro SD card is full, how is the recorded video saved?
When the micro SD card is full, the system will overwrite the previous
recorded videos. Save the important information in time.
Q: Where are the recorded videos saved?
If you have activated the cloud storage and installed a micro SD card, the
recordings will be both saved to the card and cloud. If the cloud storage is
deactivated, the recordings are saved to the SD card. Videos recorded during
live view or playback is saved on your phone.
Q: The device is offline?
Check the indicator status:
- Solid green: Check whether the router can connect to the Internet. If the network is connected, restart the camera.
- Flashing red: Reset the camera, and then configure the camera again.
- Solid red: The camera is faulty.
For more questions, please scan the QR code below or visit:
www.imoulife.com/web/support/help
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>