cudy WR1300 AC1200 Gigabit Dual Band Wi-Fi Router Installation Guide

: June 3, 2024
: cudy

Table of Contents

Quick Installation
Button Explanation
- More Features
- Support
Frequently Asked Questions (FAQ)
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

cudy WR1300 AC1200 Gigabit Dual Band Wi-Fi Router

Quick Installation

If your internet connection is through an ethernet cable directly from the wall instead of through a DSL/Cable/Satellite modem, connect the ethernet cable to the router’s WAN port, and skip steps 1, 2 ,3.

6. Connect your computer to the router (Wired or Wireless)
Wired
Turn off the Wi-Fi on your computer and connect it to router’s LAN port via an ethernet cable.
Wireless
Connect your device to the router’s Wi-Fi using the SSID (network name) and Password printed on the bottom of the router.

7. Launch a web browser, and enter http://cudy.net/ or http://192.168.10.1/ in the address bar. Use admin for password to log in.

Note: If the login window does not appear, please refer to FAQ > Q1.

8. Then below window will pop up, please follow the step-by-step instructions to set up the internet connection.

Button Explanation

BUTTON

|

DESCRIPTION

---|---
WPS| Press and hold for 1 second to enable the WPS function.
Reset| Press and hold this button for about 6 seconds to reset the router to its factory default settings.

More Features

The Cudy router supports various features. You can log in to the router’s web management page at http://cudy.net/ to configure these functions. For instructions, please refer to the user guide at http://www.cudy.com

Support

For technical support, the user guide and more information, please visit: http://www.cudy.com/support | support@cudy.com

Email:support@cudy.com

Website:www.cudy.com

Enjoy the internet!

Frequently Asked Questions (FAQ)

Q1: What can I do if the login window does not appear?****

A1: Disable the VPN service you are using on your PC or Mobile phone.
A2: If the computer is set to a static IP address, change its settings to obtain an IP address and DNS server address automatically.
A3: Verify that http://cudy.net/ or 192.168.10.1 is correctly entered in the web browser .
A4: Use another web browser and try again.
A5: Reboot your router and try again.
A6: Disable and then enable the network adapter being used.

Q2: What should I do if i can not find Wi-Fi signal?****

A: Please make sure the router is connected, power and broadband interface has no loose. If everything is normal but still no signal, please try to use computer to set, or restore the router to factory settings. If after restoring factory settings but still no signal, you can restat the router, if it still doesn’t work, maybe the router has fault.

Q3: How to Reset to defaults?****

A: While the power is still on, keep pressing the reset button for 6 seconds, and wait for 1-2 minutes and it will restore to factory settings.

Q4: Why can’t my phone enter the Setting Page of Router?****

A: Please make sure your Phone is connected to the Cudy Router Wi- Fi(default name is printed on the bottom of router), and make sure you enter the right site in the browser. (Please follow instructions FAQ -> Q1)

Q5: Why can’t I enter the Setting Page after restarting the Router?****

A: After restarting the Router, maybe your phone connect automatically to other Wi-Fi, please make sure your phone is connected to Cudy Router Wi-Fi. (default name is printed on the bottom of router)