sOmfy RS100 9.6V NIMH Battery Stick Instructions

sOmfy RS100 9.6V NIMH Battery Stick

Product Information

The 9.6V NIMH Battery Stick and 16.8V NIMH Battery Stick are designed to store the electrical energy provided by Somfy 2.5W Solar Panels (TAPE) and 5.8W Solar Panels (TAPE) and to supply the low-consumption RS100 SOLAR io drive. The extended voltage range of the batteries allows for efficient and effective use of Somfy’s solar panels and drive.

Technical Specifications

• Voltage: 9.6V or 16.8V
• Battery Type: NIMH
• Compatibility: Compatible with Somfy 2.5W Solar Panels (TAPE) and 5.8W Solar Panels (TAPE) and low-consumption RS100 SOLAR io drive

Product Usage Instructions

Safety Instructions:

• Danger: Indicates a danger that may result in immediate death or serious injury.
• Warning: Indicates a danger that may result in death or serious injury.
• Precaution: Indicates a danger that may result in minor or moderate injury.
• Attention: Indicates a danger that may result in damage to or destruction of the product.

Installation

Before installation or commissioning, it is recommended to fully
charge the battery using the external NIMH Battery Charger (not supplied) Installing the Battery

The shape of the battery has been specially designed for installation in a corner for greater discretion. The battery can be installed behind a runner, at the rear or under the housing of the motorized product, under the window frame or in the corner of an interior wall. Choose according to the configuration and type of motorized product.

• Attention: When installing on the rear of the housing, Somfy recommends using pop rivets to be riveted via the interior of the housing.
• Make an opening on the rear of the housing in order to feed the battery cable inside 15 mm

Screw Mounting

Somfy recommends screw-mounting the battery to ensure a secure hold over time and to facilitate after-sales operations.

1. Remove the plastic covers from each end of the battery:
2. Disconnect the cable from the battery connector to avoid damaging the cable during installation.
3. Select the direction in which the battery is positioned according to the configuration of your installation and identify the position of the holes as per the corresponding diagram.
4. Drill the battery fastening holes in the locations indicated.

Use and Maintenance

Charging the Battery

Use an external NIMH Battery Charger (not supplied) to charge the battery fully before installation or commissioning.

Protecting the Battery against Excessive Discharge

It is recommended to protect the battery against excessive discharge to ensure optimal performance and longevity.

Maintenance

Regular maintenance of the battery is recommended to ensure optimal performance.

Tips and Advice for Use

For tips and advice on using the 9.6V NIMH Battery Stick and 16.8V NIMH Battery Stick, please refer to the product manual or contact a Somfy advisor for further assistance.

GENERAL INFORMATION

Safety instructions

Danger
Indicates a danger which may result in immediate death or serious injury.
Warning
Indicates a danger which may result in death or serious injury.
Precaution
Indicates a danger which may result in minor or moderate injury.
Attention
Indicates a danger which may result in damage to or destruction of the product.

PRIOR INFORMATION

FIELD OF APPLICATION

The 9.6V NIMH BATTERY STICK and 16.8V NIMH BATTERY STICK have an extended voltage range enabling them to store the electrical energy provided by Somfy 2.5W SOLAR PANELS (TAPE) and 5.8W SOLAR PANELS (TAPE) and to supply the low- consumption RS100 SOLAR io drive (for more information, consult the instructions for the solar panels and the drive).

LIABILITY

Please read these instructions carefully before installing or using this product.
This product must be installed by a drive and home automation professional, in accordance with Somfy’s instructions and the regulations applicable in the country in which it is commissioned.
Any use of the product outside the above field of application is forbidden. Such use, and any failure to comply with the instructions given in this guide, absolves Somfy of any liability and invalidates the warranty.
The installer must inform his customers of the operating and maintenance conditions of this product and must provide them with the operating and maintenance instructions after installing the product. Any After-Sales Service operation on the product must be performed by a drive and home automation professional.
If in doubt when installing the product, or to obtain additional information, contact a Somfy adviser or consult the website www.somfy.com.

SAFETY INSTRUCTIONS

Danger

• Keep away from children. if swallowed, contact medical assistance at once.
• In the event of a cell leaking, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice.
• Secondary cells and batteries need to be charged before use. Always use the correct charger and refer to the manufacturer’s instructions or equipment manual for proper charging instructions.
• Do not use any charger other than that specifically provided for use with the equipment.
• Do not leave a battery on prolonged charge when not in use.
• After extended periods of storage, it may be necessary to charge and discharge the cells or batteries several times to obtain maximum performance.
• Do not expose cells or batteries to heat or fire. Avoid storage in direct sunlight.
• Do not dismantle, subject to pressure, open or shred secondary cells or batteries.
• Do not subject cells or batteries to mechanical shock.
• Do not incinerate or mutilate batteries, may burst or release toxic material.
• Do not solder directly to cells or batteries.
• Observe the plus (+) and minus (–) of the battery and the equipment and ensure correct use.
• Do not modify the connectors.
• Do not short-circuit batteries, permanent damage to batteries may result.
• Unplug a battery by holding the connector itself and not by pulling at its cord.
• Never put a battery into water or seawater.
• Store batteries in a cool dry place.
• Avoid batteries being used in an airtight compartment. Ventilation should be provided inside the battery compartment otherwise batteries may generate hydrogen gas, which could cause an explosion if exposed to an ignition source.
• Do not subject batteries to an adverse conditions such as extreme temperature, deep cycling and excessive overcharge/over-discharge.
• If find any noise, excessive temperature or leakage from a battery, please stop its use.
• When the battery is hot, please do not touch it and handle it, until it has cooled down.
• After use, if the battery is hot, before recharging it, allow it to cool in a well-ventilated place out of direct.
• Do not remove the outer sleeve from a battery pack nor cut into its housing.
• Do not use any cell or battery which is not designed for use with the equipment.
• Always purchase the battery recommended by the device manufacturer for the equipment.
• Retain the original product literature for future reference.
• Use the cell or battery only in the application for which it was intended.
• Dispose of in a suitable container.
• Do not commission a product that has been dropped; isolate it and take it to a recycling point.

INSTALLATION

Danger

• These instructions are mandatory for the home drive and automation professional installing the drive.
• The battery must be prevented from touching the motorized product’s apron.
• Never drop, knock or puncture the battery or immerse it in liquid.
• Do not dispose of the battery by burning it. Risk of explosion
  Before installation or commissioning, charge the battery fully using the external NIMH BATTERY CHARGER (not supplied).

INSTALLING THE BATTERY

Attention

• The three components – solar panel, battery, and drive – must be installed on the same side of the motorized product.
• The battery must be protected from rain (IPX4).

The shape of the battery has been specially designed for installation in a corner for greater discretion. The battery can be installed behind a runner (A), at the rear (B) or under the housing of the motorized product, under the window frame, or in the corner of an interior wall (C): choose according to the configuration and type of motorized
product. When installing on the rear of the housing (B), Somfy recommends using pop rivets to be riveted via the interior of the housing.

Make an opening on the rear of the housing in order to feed the battery cable inside:

• Cut a half-oblong 10 mm in diameter and 15 mm long from the edge of the housing, as per the diagram.

Screw mounting

Somfy recommends screw-mounting the battery to ensure a secure hold over time and to facilitate after-sales operations.

1. Remove the plastic covers from each end of the battery:
2. Disconnect the cable from the battery connector to avoid damaging the cable during installation.
3. Select the direction in which the battery is positioned according to the configuration ofyour installation and identify the position of the holes as per the corresponding diagram.
4. Drill the battery fastening holes in the locations indicated.
   • Do not drill through the battery supports.
5. Secure the battery using the steel pop rivets or screws with Ø 5 mm in the holes drilled.
   • When installing on the rear of the housing, Somfy recommends using pop rivets to be riveted via the interior of the housing.
   • Do not use countersunk screws.
6. Reconnect the cable to the battery connector.
7. Reposition the covers at each end of the battery and press until they clip into place.
   • Check that the cable grommet and the sealing pellet are correctly positioned under the covers.

Adhesive-mounting

• Somfy does not recommend adhesive-mounting the battery, especially on non-smooth and porous surfaces such as plastering, concrete or wood.
• The ambient temperature when applying the adhesive must be between 20°C and 38°C.
• Clean the chosen installation points well using a degreasing agent and wipe the adhesive surface.

1. Select one of the two flat surfaces on which to stick the adhesive in accordance with the configuration of your installation.
2. Remove the protective paper from the adhesive and stick it to the flat surface of the battery selected.
3. Remove the other protective paper from the adhesive and press the battery onto the cleaned surface using even force.

WIRING

Warning
Never cause a short circuit across the battery terminals. Risk of burns and explosion.

Attention

• Do not cut or modify the cable.
• The connections with the drive must be inside the housing of the motorized product.
• A cable crossing a metallic wall must be protected and insulated by means of the cable grommet supplied on the cable.
• Attach cables to prevent any contact with moving parts.
• Somfy recommends placing the connectors between the end piece and flange and fixing the cables inside the housing of the motorized product.
  Wire the 2-pin connector of the battery (A) to the 2-pin connector of the drive (B).

COMMISSIONING

• Before commissioning, charge the battery fully using the external NIMH BATTERY CHARGER available in the Somfy catalog.

• Once the battery is charged, disconnect the charger to be able to use the drive.
  Warning

• Any use of another battery charger is prohibited.

• Do not exceed the maximum charging time of 3.5 hours.

• Do not disconnect the battery when commissioning.

1. Connect the external battery charger power cable to a mains socket. The green indicator light flashes.
2. Disconnect the solar panel connector (C) from the drive connector (D).
3. Connect the external battery charger connector (E) to the drive connector (D). The indicator light on the charger turns solid yellow while the battery is being charged.
4. Wait until the LED turns green: the battery charging phase is complete.
5. Disconnect the charger from the main socket.
6. Disconnect the external battery charger connector (E) from the drive connector (D).
7. Connect the solar panel connector (C) to the drive connector (D).

BATTERY CHARGING

After installing and commissioning the RS100 SOLAR io kit (drive, Somfy battery, Somfy solar panel), the battery charges with electrical energy via the solar panel.
The electrical energy transmitted by the solar panel is stored by the battery to supply the drive.

NOTE: It is possible to check the battery’s actual charge level via the TaHoma application. To do this, beforehand, an order to raise the motorized product is necessary to update this level.

PROTECTING THE BATTERY AGAINST EXCESSIVE DISCHARGE.

Normal voltage
The drive works normally.

Response to low battery
When the Up, or Down button is pressed, the drive checks the battery voltage:
if it is low (or the shutter is very heavy), the drive can reduce its speed to preserve the battery life, but if the voltage is too low, please refer to the following paragraph.

Response to insufficient battery
When the Up, my or Down button is pressed, the drive does not execute the command but makes a short up-and-down movement.

Response to the drained battery (less than 6.8 V for 9.6 V batteries, and less than 11.9 V for 16.8 V batteries)
When the Up, my or Down button is pressed, the drive no longer reacts to the command.

Thanks to the solar panel, the battery voltage will increase to 9.6 V or 16.8 V again, depending on the version used, and the drive will resume normal operation. There is nevertheless an alternative solution to recharge the battery using the NIMH BATTERY CHARGER available in the Somfy catalog.

MAINTENANCE

Attention

• Any use of another battery charger is prohibited.
• Never leave the battery discharged.

The life of the battery is about 8 years.
If the motorized product behaves abnormally as described in the previous section and the drive does not return to normal operation after a sunny period, there has probably been a major discharge from the battery. In this case, the battery needs to be charged using the Somfy-compatible external battery charger by a drive and home automation professional.

• If this occurs on a regular basis, the battery must be replaced or the orientation of the solar panel must be changed by a drive and home automation professional.

TIPS AND ADVICE FOR USE

Questions about the battery?

wiring and modify it if necessary.
Check that the connection between the motor and the battery has been carried out correctly.
The battery is low.| Wait while the solar panel recharges the battery, or have the battery recharged.
One of the components (motor, solar panel, control point, etc.) is not working.| See the corresponding instructions.
Observations| Possible causes| Solutions
---|---|---
The motorised product performs two brief movements in the same direction, when the Down button or STOP/my button is pressed.| The battery is low| Wait while the solar panel recharges the battery, or have the battery recharged.
The battery is recharged several times a year using the external battery charger.| The solar panel is incorrectly positioned.| Check the location of the solar panel; see the Somfy solar panel instructions.
The solar panel is defective or damaged.| Replace the solar panel; see the Somfy solar panel instructions.
The battery has reached the end of its service life.| Replace the battery.

Recharging and replacing the battery
To recharge and replace the battery, contact a drive and home automation professional.

Please separate storage cells and batteries from other types of waste, and recycle them via your local collection facility.

TECHNICAL DATA

this period, there is a risk that the battery may be completely discharged.
Maximum charging current via the solar panel| 280 mA
Maximum charging current via the NIMH BATTERY CHARGER| 800 mA
| ****|

For more information about the technical data relating to this battery, please contact a Somfy representative.

References

• Somfy.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>