TRIDONIC Wireless Module Passive MTR Instruction Manual
- June 9, 2024
- TRIDONIC
Table of Contents
Wireless Module Passive MTR
Instruction Manual
Article number: 28004483
Wireless Module Passive MTR
Wiring diagram with external PS
Mains supply/DALI wires:
solid/fine-stranded
Wiring diagram with integrated DALI PS
Antenna is located
on the top of the device.
The Wireless Module Passive MTR is a Matter-capable DALI controller with 4
freely configurable push-button inputs.
The module is supplied via the DALI bus, an additional mains supply is not
required.
Technical Data
| Supply voltage DC (acc. IEC 62386-101) | 9.5–22.5 V |
|---|---|
| Current consumption of DALI | 4 mA (30 mA at start) |
| Max. DALI bus current | 250 mA |
| Typ. power input on stand-by | < 0.09 W |
| Input | 4 push-buttons |
| Max. cable length push button | 5 m at 0.2-1.5 mm² |
| Operating frequency radio receiver | 2.4–2.483 GHz |
| Max. output power radio transceiver (E.R.I.P.) ① | < +20 dBm |
| Output | DALI (compatible) |
| Turn on time | ≤ 2 s |
| Ambient temperature | -20… +70 °C |
| tc point | 75 °C |
| Storage temperature | -25… +75°C |
| Dimensions L x W x H ② | 80.7 x 30 x 15.3 mm |
| Type of protection | IP20 |
① E.I.R.P.: Equivalent Isotropic ally Radiated Power.
② Screw fixings can be removed.
Safety instructions
- Installation of this device may only be carried out by specialist staff who have provided proof of their skills.
- Switch off the power supply before handling the device.
- Observe the relevant safety and accident prevention regulations.
Installation Instructions
Make sure that the mains voltage is switched off when making any connections.
Use 0.2 – 1.5 mm² solid or stranded electrical wires for the mains supply/DALI
terminals and 0.14 – 0.5 mm² for the push-button terminals.
Strip the wire 8.5 – 9.5 mm from the end.
Make sure to connect the input and outputs correctly. Mains input connector is
marked with letters L and N.
Hereby, Tridonic declares that the radio equipment type Wireless Module
Passive MTR is in compliance with Directive 2014/53/EU.
Hereby, Tridonic declares that the radio equipment type Wireless Module
Passive MTR is in compliance with Directive UK SI 2017 No. 1206.
The full text is available at the following internet address:
https://trid.help/en28004483cer
Areas of application
The device may only
- Be used for the applications specified.
- For safe installation in dry, clean environment.
- Be installed in such a way that access is only possible using a tool.
12/22-15015378-0
We reserve the right to make technical changes without prior notice.
Tridonic GmbH & Co KG
www.tridonic.com
info@tridonic.com
Tel. +43 5572 395-0
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>