telldus 15261 Door/Window Sensor Bluetooth User Manual
- June 9, 2024
- TELLDUS
Table of Contents
telldus 15261 Door/Window Sensor Bluetooth
Installation
Placing the sensor
Recommended installation location is the magnet (smaller size one) on the frame and the main unit (bigger size one) on the door or window, with the mark on the same side of the magnet. The detection range of the sensor is 1 cm.
Maintenance
Replace battery
Wake up sensor
Press the red button for 2 seconds when you want to change the settings of
the sensor from the App.
Reset sensor
Press the red button for 6 seconds if you cannot include the sensor using
the App.
Read this before installation
- This sensor may not be installed outdoors.
- For smooth surfaces: You may use double adhesive tape for fastening the sensor.
- Adjust the sensor according to the actual condition.
- The distance between the sensor and the magnet must not be greater than 1 cm for the sensor to recognize it as Closed.
Specifications
- Article number: 15261
- Size: 35x42mm
- Detection area: ≤1cm
- Battery: 3V CR1632
- Range: 0-30m
- Protection class: IP20
- Frequency: Bluetooth 2.4GHz
- Operating temperature: -10– + 55
Correct disposal of the products
Within the European Union, this symbol indicates that the products must not be disposed of in the household waste. Devices contain valuable recyclable materials that should be recycled for reuse and uncontrolled waste disposal may cause harm to the environment and human health. Please dispose of the old products via suitable collection systems or send the unit to the office where you bought it. This will make the product recycle.
Proove Distribution AB
Birger Svensson Väg 34 B 432 40 Varberg, Sweden
www.telldus.com
support.telldus.com.