MILANTOAST 420.002 Sandwich Toaster User Manual

Sandwich Toaster
User Manual 420.002

420.002 Sandwich Toaster

CLASSIC SANDWICH TOASTER

Thank you for purchasing this high-quality appliance, original MILANTOAST, made in Italy.
Please read the instructions carefully before using it. Follow the safety instructions and keep the manual for future reference.

PRELIMINARY OPERATIONS

Carefully remove the product from the packaging and keep the original packaging for any return of the product.
Remove all plastic, cardboard, any other protective element, accessories must be removed.
The adhesive plastic film covering the stainless-steel parts must be removed before putting into operation unit.
Remove any adhesive residue with an available stainless-steel cleaner on the market.
Wash the sandwich tongs with water and soap or in the dishwasher.
Data sheet and warnings must not be removed! The packing items should not be left within the reach of children. If the appliance shows signs of damage contact the seller.

IMPORTANT SAFETY INSTRUCTIONS

The safety instructions of this appliance comply with the recognized rules of technology. Nevertheless, we draw your attention to the following safety instructions:

• The device is not designed to be used in an altitude above 2000 m.

• Do not clean with a steam cleaner.

• Make sure that the supply voltage of the distribution network corresponds to that indicated on the appliance plate. The plate is located on the side of the appliance.

• Make sure that the power outlet is equipped with earth contact and that the electrical system follows current regulations.

• In case of incompatibility between the socket and plug of the appliance, have the socket replaced with another of a suitable type by professionally qualified personnel.

• Single or multiple extension cords and adapters are not recommended. It is possible to avoid its use by choosing only adapters or extensions compliant with current  safety standards, without exceeding the load limits indicated.

• It is recommended that the power outlet is protected by a 0.03 A (30mA) differential switch.

• If the appliance is placed near walls, kitchen furniture, decorative finishes, etc. it is recommended that these are made of suitable and non-combustible materials. The  utmost attention must be paid to fire prevention standards. We also recommend keeping the appliance at one minimum distance of 20 cm from the surrounding walls  and at a large distance from the ceiling upwards. Do not cover the device: risk of fire!

• During use, be careful not to obstruct the ventilation openings of the appliance.

• If the supply cord is damaged, it must be replaced with an original cable by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.

• Keep adequate space to place the machine. The support surface must be stable and adequately resistant to the heat given off by the appliance and its weight.

• Once the machine is installed, make sure that the plug is always accessible and the data sheet clearly visible.

• Do not leave the appliance unattended during use.

• Do not use outdoors. Do not use in humid environments.

• Do not immerse or bathe in water or other liquid. The appliance is not water jet proof and therefore must not be cleaned with this system. Do not cover the appliance as there might be a fire hazard.
  Disconnect the plug when not in use. Disconnect the plug before moving it.

• Before moving the appliance, let it cool down for at least 45 minutes.

• Do not pull the power cable or the appliance itself to disconnect the plug from the socket. Do not allow the power cord to touch the appliance.

• Danger of burns.
  Do not touch the hot surfaces of the appliance. The temperature of hot surfaces can be remarkably high when the appliance is working. Always use the handles and  control knobs.

• Before moving the appliance, let it cool down. Do not use if it has been exposed to temperatures below 0 ° C in the previous 24 hours.

• The appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless  they have been given supervised or instruction concerning use of the appliance by a responsible person for their safely

• Young children should be supervised to ensure that they do not play with the appliance

• This appliance is not intended to be operated by means of external timer or separate remote-control system

• Bread may burn, therefore do not use the toaster near or below combustible material, such as curtains.
  The toaster should be attended when in use.

• This appliance is intended to be used in household and similar applications such as:

  • Staff kitchen areas in shops, offices and other working environments;
  • Farm houses
  • By clients in hotels, motels and other residential type environments;
  • Bed and Breakfast type environments

DEVICE CONNECTION, USAGE AND OPERATION

The toaster is intended for toasting one or more slices of bread using radiant heat. Any other use is to be considered improper and therefore dangerous.

FIRST IGNITION OR RE-IGNITION AFTER A LONG PERIOD OF INACTIVITY (Reference page 2)

1. Carry out the operations in a ventilated room.
2. Insert the power plug into the socket.
3. Turn the knobs (3) of the timers clockwise.
4. The indicator lights (2) should stay on for about 4 minutes.
5. Repeat the sequence described above after a few minutes.
   During the execution of these vacuum cycles, white smoke might come out of the ovens.
   It is the processing residue of the heating element.

OPERATION

Attention: The maximum thickness of the bread or sandwich inserted in the sandwich tongs (1) is 3 cm. The minimum size of the slice of bread is 4x4cm while the maximum  is 14x14cm.
The toaster works then automatically, and the ovens are completely independent of each other, each one with its own timer.

1. Insert the crumb tray (4).
2. Insert the power plug into the power outlet.
3. Remove the tong by grasping it by the handles.
4. By exerting a slight pressure on the sandwich tong-handles, the sandwich tongs widen.
5. Insert the slices or sandwich into the sandwich tong with movable walls.
6. You can then insert the sandwich, relieve the pressure on the handles and insert the sandwich tong into the slot.
7. Turn the knob (3) of the timer clockwise to the desired heating time: the lighting of the indicator light (2) displays the operating time.
8. Once the set heating time has elapsed, remove the sandwich tong from the slot.
9. Disconnect the power plug at the end of use.
   Warning: Do not put your hands into the oven. Bread must be introduced strictly into the sandwich tongs.
   Use only the original sandwich tongs supplied.

RECOMMENDATIONS FOR USE

Always follow the requirements for safe use (CHAPTER 2)
The time required to obtain the right toasting level of the bread and the filling depends on many different variables such as quality and variety of food, bread thickness, food  dimensions, bread-and filling temperature.
The toasting time for a slice of white bread (size 10×10 cm, room temperature) can be set with the timer to less than two minutes.
It is then recommended to establish the ideal cooking time for your needs through subsequent tests.
It should also be noted that:

• The possible buttering of the bread surfaces makes the slice softer and cooked but lengthens the cooking time.
• The best results are obtained by using bread and filling at room temperature.
• If you use black bread instead of white bread, you need to increase the cooking time.
• When the toaster is cold, the cooking time must be increased.
• The slices of bread must be cut straight and not rough.
• Never use too small pieces of bread.
  Warning: Food cooked with this toaster can be extremely hot. Handle it carefully.

CLEANING

• Disconnect the power plug before any cleaning operation
• Allow the toaster to cool before each cleaning or moving operation
• Top and base are in polished aluminum. Clean with a dump cloth only.
• Clean the stainless-steel toaster (7000, 7040) externally with a damp cloth or specific products for stainless steel.
• Clean the body of coloured toaster versions (7001, 7002, 7003, 7004, 7005) with a damp cloth only.
• Periodically remove the grease/crumb tray (4) and clean it with a damp cloth or in the dishwasher.
• The sandwich tongs must be cleaned periodically with a damp cloth or in the dishwasher.
• It is forbidden to use tools for cleaning the heating elements.

MAINTENANCE

In case of fault, contact the manufacturer or seller.
Periodically check the conditions of the following parts: power cable, knobs, tightening screws.

DISPOSAL

The symbol ****on the device and on the packaging indicates that this device should not be treated like ordinary household waste. Every consumer is legally obliged to dispose of old devices separately from household waste and e.g. be delivered to a collection point in your community / district. This ensures that old devices are properly recycled in order to avoid negative effects on the environment.

WARRANTY

1. The purpose of the warranty is to insure the buyer against any manufacturing defect. The duration is 2 years from the documented purchase date for private use and 1  year for commercial use. During this period, the warranty also covers spare parts and labour. The warranty is at the retailer’s laboratory, therefore, the transport costs that are charged to the customer. Any replaced parts become exclusive property of the retailer.

2. The warranty is valid in all countries of the European Union.

3. The warranty does not cover the necessary interventions:
   a. breakage caused by knocks and falls
   b. connections to higher electric voltage than the indicated one.
   c. normal wear of the appliance.
   d. parts damaged by neglect and / or tampering.

4. Under this warranty, the manufacturer cannot be held liable responsible for material damage or accidents to people, resulting from an installation that does not comply  with safety standards in force and for:
   a. faulty power socket, absence of earth connection, etc.
   b. unsuitability of the product for the use for which the buyer intends to use it.

DECLARATION OF CONFORMITY

MILANTOAST, given the positive outcome of the test and inspection reports, declares under its own responsibility that the Products CLASSIC SANDWICH TOASTER  MILANTOAST identified with the codes 7000, 7001, 7002, 7003, 7004, 7005 and 7040 comply with the following Directives:
2014/35/UE (LVD), 2014/30/UE (EMC), 1935/2004 (FOOD CONTACT), DM 21/03/1973 (FOOD CONTACT) They also comply with the following standards: 2011/65/CE (RoHS).
It is also declared that these products do not contain asbestos and / or mercury elements.

420002-004-012-022-032 M23NED

Documents / Resources

| MILANTOAST 420.002 Sandwich Toaster [pdf] User Manual
420.002, 420.004, 420.012, 420.022, 420.032, 420.002 Sandwich Toaster, 420.002, Sandwich Toaster, Toaster
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>