neno Lindo Steriliser and Bottle Warmer User Manual

neno Lindo Steriliser and Bottle Warmer

Dear Customer,
Thank you for purchasing the Neno Lindo steriliser and bottle warmer. Please read the user manual before use and keep it in case you need to use it again.

PRECAUTIONS

1. Carefully read the instructions before use.
2. To avoid flooding the steriliser, do not clean it under running water.
3. Keep the appliance away from children and babies. Remove the plug from the socket if the steriliser will not be used for a long time.
4. If the plug or cable is damaged, return it to Neno service, or contact an authorised representative.
5. Do not pour milk or food directly into the warming vessel.
6. Remember that the heating time of the food should not be too long, so that the food does not lose its nutritional value.
7. Check the temperature of the food on your wrist before feeding your baby.
8. The steriliser can be used by adults. Adults with limited physical, mental and sensory abilities may use the device under the supervision of another adult.
9. Cleaning and maintenance should be carried out by adults. Keep all parts of the appliance away from children under 8 years of age.

Tips: Wipe the steriliser with a damp tissue before first use for improved user comfort. Wash the handle, pour distilled water into the heater and switch on the sterilisation function. After sterilisation, pour off the water and leave the device to dry.

CLEANING AND MAINTENANCE

1. Unplug the unit from the socket and allow it to cool down before cleaning.
2. Be careful not to damage the heating surface with sharp metal tools.
3.  If limescale accumulates, pour citric acid or vinegar into the water and boil using the sterilising function.
4. Cleaning: Remove the top cover from the body and wipe the surface of the unit with a damp, soft cloth. It is recommended to clean the unit every 10–15 days.
5. Do not use abrasive cleaning tools to avoid scratching the product. Other-wise, the protective layer on the hob surface will be damaged, resulting in oxidation and blackening of the hob surface.
6. Set the unit aside to dry after cleaning. Do not immerse the body in water for cleaning.
7. Every two months, it is recommended to pour a mixture of citric acid and vinegar or detergent into the vessel and leave it for 10 minutes, then rinse it under running water.

SPECIFICATION

• Power: AC 220V 200W
• Recommended operating temperature and humidity: 15–30 °C/ 30–80%Weight: 1.3 kg
• Dimensions: 21.9x 13.2x 26.3 cm
• Cable length: 100 cm

DISPLAY AND OPERATING PANEL SEE FIG. A

1. Set temperature/time
2. Time/temperature increase
3. Quick warm milk
4. Formula
5. Breast milk defrosting
6. Timer
7. Power switch/standby
8. Current temperature/time
9. Time/temperature reduction
10.  Milk warming
11. Food Warming
12. Disinfection
13. Night light

OPERATION OF THE DEVICE

1. When the plug is inserted into the socket, the device will automatically go to sleep.
2. Press the power button to switch the unit on or off. When switched on, the function indicators will illuminate on the screen.
3. Only pour distilled water into the appliance. The use of tap water can cause large-scale accumulations.
4. Select one of the possible functions:
   • Quick heat: Pour in approximately 500 ml of water, then insert a bottle or jar of food and replace the lid. Press the quick heat function button and set the temperature between 35°C–40°C, the default temperature is 40°C. The appliance will start the accelerated heating mode. Once heated to the set temperature, the heater will switch off but will continue to give off heat, so the actual temperature may differ from the set temperature by up to ~10°C. If you want a stable heating temperature, use the milk heating function. Check the temperature of the warmed food before giving it to your baby. Once warming is complete, press the power button or quick warm again to put the unit into sleep mode or disconnect the steriliser from the power supply.
   • Temperature maintenance: Pour between 300 and 500 ml of water, then insert the bottle, pouch or jar of food and replace the lid. Press the modified milk function button and set the temperature between 40°C–65°C, the default temperature is 45°C. When finished heating, press the power button or reheat modified milk to put the unit into sleep mode or disconnect the steriliser from the power supply.
   •  Heating the milk: Pour in between 300 and 500 ml of water, then insert a bottle, pouch or jar of breastmilk and replace the lid. Press the milk warming function button and set the temperature between 35°C–45°C, the default temperature is 40°C. When heating is complete, press the power button or the milk reheat button to put the unit into sleep mode or unplug the steriliser.
   • Defrosting: pour in between 300 and 500 ml of water, then insert a bottle, pouch or jar of food and replace the lid. Press the defrost function button and set the temperature between 25°C–40°C, the default tempe-rature is 35°C. After 30 minutes, the appliance will go into a 40°C keep warm state. If you want a constant temperature use the Milk Warm-up mode. Once heating is complete, press the power button or the defrost button again to put the unit into sleep mode or unplug the steriliser.
   • Sterilisation: Pour in the correct amount of water according to the selec-ted programme, then place the bottles on the bottle holder and insert them into the machine. SEE FIG B Press the disinfection function button and select one of the three modes.
   • Mode for plastic bottles, pour in 100–120 ml of water. Duration: 18 minutes, the machine heats the water for 15 minutes and for the next 3 minutes allow the machine to cool down gently.
   • Mode for silicone bottles and accessories, pour in 100–120 ml of wa-ter. Duration: 20 minutes, the device heats the water for 17 minutes, and for the next 3 minutes allow the device to cool down gently.
   • Mode for glass bottles, pour 120–150 ml of water. Duration: 25 minutes, the machine heats the water for 22 minutes and the next 3 minutes allow the machine to cool down gently.
   • Heating food: Pour in between 100 and 200ml of water, insert the bottle holder with the tabs to the underside SEE FIG C, then insert the bottle, pouch or jar of food and replace the lid. Press the food warming function button and set the temperature between 65°C–75°C, the default tempe-rature is 45°C. When finished heating, press the power button or reheat the breastmilk to put the unit into sleep mode or unplug the steriliser.
   • Timer switch: select one of the functions, set the temperature or mode and then press the „Timer” button. Set the time between 30 minutes and 24 hours. The heater will illuminate the set time three times and then start counting down. The unit 30 minutes before the end of the time will stop displaying the time and start heating so that the food is ready after the time set on the warmer. Remember that the unit will not switch itself off, use the off/sleep button to end the warming process.
   • Night light- You can use the light in both sleep and working mode. Press the lamp button to switch it on. Pressing again will switch the lamp off after 30 seconds. When pressed again, the lamp will switch off immediately.

The time taken to prepare the food will vary depending on the temperature and the amount of food.

CONSTRUCTION OF THE DEVICE SEE FIG. D

1. Bottle holder
2. Main machine
3. Power cable
4.  Transparent cover
5. Control panel

WARRANTY CARD

Dear Customer, thank you for purchasing our Neno Lindo steriliser and bottle warmer. If you have any problems with the operation of the device under normal conditions, please contact an authorised Neno brand service centre or distributor. Keep your warranty card in case repairs are required. The product comes with a 24-month guarantee. Warranty conditions can be found at: https://neno.pl/gwarancja Details, contact and service address can be found at: https://neno.pl/kontakt Specifications and contents are subject to change without notice. We apologise for any inconvenience.

DISPOSAL

The crossed out trash can symbol indicates that unusable electrical or electronic devices, its accessories (such as power supplies, cords) or components (for example batteries, if included) cannot be disposed of alongside with household waste. In order to dispose to the devices or its components (for example,, batteries) deliver the device to the collectionpoint, where it will be accepted free of charge. Disposal is subject to the recast version of the WEEĘ Directive (2012/19/ EU) and the Directive on batteries and accumulators (2006/66 EC). Proper disposal of the, device prevents degradation of the natural environment. Information about the collection points of the facilities is issued by the competent local authorities. Incorrect disposal of waste is subject to penalties provided for by the law in force in the given area.

Producent/ Manufacturer:
KGK Trade sp. z o.0. sp. k. Ujastek 5b 31-752 Cracow Poland Made in PRC

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>