CRYSTORAMA ABB-3009-BK Abbott 11 Light Black Chandelier Instruction Manual

ABB-3009-BK Abbott 11 Light Black Chandelier

ASSEMBLY INSTRUCTION MODEL SASS-3009-BR

WARNING :

All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes.
You will need 11-Candelabra 40 Watts Recommended 60 Watts Max. USE LED BULBS FOR EXTENDED USE THIS FIXTURE IS DRY RATED

How to install for hanging:

Please place the fixture frame on a soft cloth covered table before the installation.

1. Determine the desired hanging height and choose the correct length of Rod (G. H and I).
2. Feed the fixture wires through the rods and canopy. Afterwards, connect the rods together then screw the swivel onto the top of the upper-most rod.
3. Attach the Canopy (E) with the Washer (D) and the Hex Nut (C) to the swivel on top of the Rod (G), then lock the Canopy (E) with the Hex Nut (C) using the Wrench (8) supplied.
4. The Canopy of the fixture can now be mounted to the ceiling by following Drawing 2.
5.  Place the Candle Sleeve (L) over the Sodcet, then Install the Bulb to the Socket.

WARNING: This product can expose you to Lead which is known to the state of California to cause cancer and/or birth defects or reproductive harm. For more information go to www.P65Wamings.ca.gov

Part Number

Part Numbers
A. (1)-Mounting hardware
B. (1)-Wrench
C. (2)-Hex Nut
D. (2)-Washer
E. (1)-Canopy L7-7/8″x W5-3/8″ (XFW3009BKCAN7.88IN)
F. (1)-Metal Nut (XFW3009BKNUT)
G. (2)-Rod with Swivel
H. (4)-Long Rod W5/8″x H12″ (XFW3009BKROD12IN)
I. (2)-Short Rod W5/8″x H6″ (XFW3009BKROD6IN)
J. (1)-Lamp Body
K. (11)-Bulb (Not included)
L. (11)-Candle Sleeve (XFW3009BKCDL2.75IN)      

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>