BOSCH GSR Robert Power Tools GmbH Instructions

: June 5, 2024
: Bosch

Table of Contents

Safety Notes
Product Description and Specifications
Product Features
Technical Data
- Assembly
Operation
Maintenance and Service
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Robert Power Tools GmbH
Original instructions

BOSCH GSR Robert Power Tools GmbH -

** GSB 18 V-EC**

BOSCH GSR Robert Power Tools GmbH - fig 1 | BOSCH
GSR Robert Power Tools GmbH - fig
---|---

Safety Notes

General Power Tool Safety Warnings
**WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.
Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.
Work area safety**

Keep work area clean and well-lit. Cluttered or dark areas invite accidents.
Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks that may ignite dust or fumes.
Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

Electrical safety

Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce the risk of electric shock.
Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded
Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges and moving parts. Damaged or entangled cords increase the risk of electric shock.
When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock. Personal safety
Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.
Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.
If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. The use of dust collection can reduce dust-related hazards.

Power tool use and care

Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.

Battery tool use and care

Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.
When the battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.

Service

Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

Safety Warnings for Drills and Screwdrivers
GSB 14,4 V-EC/GSB 18 V-EC

Wear ear protectors when impact drilling. Exposure to noise can cause hearing loss. GSR 14,4 V-EC/GSR 18 V-EC/ GSB 14,4 V-EC/GSB 18 V-EC
Hold power tool by insulated gripping surfaces when performing an operation where the cutting accessory or fastener may contact hidden wiring. Cutting accessories and fasteners contacting a “live” wire may make ex- posed metal parts of the power tool “live” and could give the operator an electric shock.
Use auxiliary handle(s), if supplied with the tool. Loss of control can cause personal injury.
Use appropriate detectors to determine if utility lines are hidden in the work area or call the local utility company for assistance. Contact with electric lines can lead to fire and electric shock. Damaging a gas line can lead to an explosion. Penetrating a water line causes property damage.
Switch off the power tool immediately when the tool inserts jams. Be prepared for high reaction torque that can cause kickback. The tool insert jams when:
— the power tool is subject to overload or
— it becomes wedged in the workpiece.
Hold the machine with a firm grip. High reaction torque can briefly occur while driving in and loosening screws.
Secure the workpiece. A workpiece clamped with clamping devices or in a vice is held more secure than by hand.
Always wait until the machine has come to a complete stop before placing it down. The tool insert can jam and lead to loss of control over the power tool.
Do not open the battery. The danger of short-circuiting.
Protect the battery against heat, e. g., against
continuous intense sunlight, fire, water, and moisture. The danger of explosion.
In case of damage and improper use of the battery, vapors may be emitted. Ventilate the area and seek medical help in case of complaints. The vapors can irritate the respiratory system.
Use the battery only in conjunction with your Bosch power tool. This measure alone protects the battery against dangerous overload.
The battery can be damaged by pointed objects such as nails or screwdrivers or by force applied externally. An internal short circuit can occur and the battery can burn, smoke, explode or overheat.
The battery is supplied partially charged. To ensure full battery capacity, completely charge the battery in the battery charger before using it for the first time.
Read the operating instructions of the battery charger.
Adjust the gear switch only when the machine is at a complete stop.
Always push the gear selector and turn the operating mode selector switch through to the stop. Otherwise, the machine can become damaged.

Product Description and Specifications

Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.
While reading the operating instructions, unfold the graphics page for the machine and leave it open.
Intended Use
The machine is intended for driving in and loosening screws as well as for drilling in wood, metal, ceramics and plastic. GSB machines are additionally intended for impact drilling in bricks, brickwork, and masonry.
The light of this power tool is intended to illuminate the power tool’s direct area of working operation and is not suitable for household room illumination.

Product Features

The numbering of the product features refers to the illustration of the machine on the graphics page.

Tool holder
Keyless chuck
Torque presetting ring
Mode selector switch (GSB 14,4 V-EC, GSB 18 V-EC)
Gear selector
Colour clip
Belt clip
Battery pack
Battery unlocking button
Worklight
Overload protector indicator
Universal bit holder*
Rotational direction switch
On/Off switch
Handle (insulated gripping surface)

*Accessories shown or described are not part of the standard delivery scope of the product. A complete overview of accessories can be found in our accessories program.

Technical Data

Cordless Screwdriver		GSR 14,4 V-EC	GSR 18 V-EC	GSB 14,4 V-EC	GSB 18 V-EC
Article number		3 601 JE8 O.	3 601 JE8 1.	3 601 JE9 0.	3 601 JE9 1.
Rated voltage	V=	14.	18	14.	18

No-load speed – 1st gear
– 2nd gear| Milli
Milli| 0-600
0-1900| 0-600
0-1900| 0-600
0-1900| 0-600
0-1900
Impact rate| Milli| | | 0-28 500| 0-28 500
Max. torque for soft screwdrivint
application according to ISO 5393| Nm| 28| 31| 28| 31′
Maximum torque, hard screwdriving application according to ISO 5393| Nm| 56.| 60| 56| 60
Maximum drilling diameter (lst/2nd gear)
– Wood
– Steel
– Brickwork| mm
mm
mm| 35
13| 38
13| 35
13
13| 38
13
13
Tool holder| | 1/5/13| 1/5/13| 1/5/13| 1/5/13
Max. screw dia.| mm| 8| 10| 8| 10
Weight according to EPTAProcedure 01:2014| kg| 1.4 -1.7′| 1.5 – 2.0′| 1.5 -1.7′| 1.5 – 2.0*
Permitted ambient temperature – during charging_
– during operation and during storage| °C
°C| 0… +45
-20… +50| 0… +45
-20… +50| 0… +45
-20… +50| 0… +45
-20… +50
Recommended batteries| | GBA 14,4V..| GBA 18V.. GBA 18V… W| GBA 14,4V..| GBA 18V.. GBA 18V… W
Recommended chargers| | AL 18.. GAL 3680| AL 18.. GAL 3680| AL 18.. GAL 3680| AL 18.. GAL 3680
Recommended chargers for wireless charging batteries| | | GAL 18… W| | GAL 18… W

*depending on the battery pack being used
Limited performance at temperatures <0 °C
**

Noise/Vibration Information
Sound emission values are determined according to
EN 60745-2-1, EN 60745-2-2.
GSR 14,4 V-EC / GSB 14,4 V-EC
Typically the A-weighted noise levels of the product are: Sound pressure level 86 dB(A); Sound power level 97 dB(A). Uncertainty
K=3 dB.
Wear hearing protection!
GSR 18 V-EC / GSB 18 V-EC
Typically the A-weighted noise levels of the product are Sound pressure level 87 dB(A); Sound power level 98 dB(A). Uncertainty K =3 dB.
Wear hearing protection!

| | GSR 14,4 V-EC| GSR 18 V-EC| GSB 14,4 V-EC| GSB 18 V-EC
---|---|---|---|---|---
Vibration total values ah (triax vector sum) and uncertainty K determined according to toEN 60745-2-2.| | | | |
Drilling in metal:
ah K| m/s 2
m/s 2| <2.5
1.5| <2.5
1.5| <2.5
1.5| <2.5
1.5
Impact drilling in concrete:
ah K| m/s 2
m/s 2| –
–| –
–| –
–| –
–
Screws:
ah K| m/s 2
m/s 2| <2.5
1.5| <2.5
1.5| <2.5
1.5| <2.5
1.5

The vibration level given in this information sheet has been measured in accordance with a standardized test given in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure. The declared vibration emission level represents the main applications of the tool. However, if the tool is used for different applications, with different accessories or insertion tools or is poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running but not actually doing the job. This may significantly reduce the exposure level over the total working period. Identify additional safety measures to protect the operator from the effects of vibration such as: maintaining the tool and the accessories, keeping the hands warm, and organization of work patterns.
Declaration of Conformity
We declare under our sole responsibility that the product described under “Technical Data” is in conformity with all relevant provisions of the directives 2009/125/EC (Regulation 1194/2012), 2011/65/EU, until 19 April 2016:
2004/108/EC, from 20 April 2016 on 2014/30/EU, 2006/42/EC including their amendments and complies with the following standards: EN 60745-1, EN 60745-2-1, EN 60745-2-2, EN 50581.
Technical file (2006/42/EC) at: Robert Bosch Power Tools GmbH, PT/ECS, 70538 Stuttgart, GERMANY
Henk Becker: Helmut Heinzelmann
E xecutive Vice Preside: Head of Product Certification
Engineering and Manufacturing: PT/ECS

Robert Bosch Power Tools GmbH
70538 Stuttgart, GERMANY
Stuttgart, 01.01.2017

Assembly

Battery Charging
Note: The battery supplied is partially charged. To ensure full capacity of the battery, completely charge the battery in the battery charger before using your power tool for the first time.
The lithium-ion battery can be charged at any time without reducing its service life. Interrupting the charging procedure does not damage the battery.
The lithium-ion battery is protected against deep discharging by the “Electronic Cell Protection (ECP)”. When the battery is empty, the machine is switched off by means of a protective circuit: The inserted tool no longer rotates.

Do not continue to press the On/Off switch after the machine has been automatically switched off. The battery can be damaged.

Removing the battery
The battery 8 is equipped with two locking levels that should prevent the battery from falling out when pushing the battery unlocking button 9 unintentionally. As long as the battery is inserted in the power tool, it is held in position by means of a spring.

BOSCH GSR Robert Power Tools GmbH - fig 7

To remove the battery 8, press the unlocking button 9 and pull out the battery toward the front. Do not exert any force.
Changing the Tool (see figure A)

Before any work on the machine itself (e. g. maintenance, tool change, etc.) as well as during transport and storage, remove the battery from the power tool. There is a danger of injury when unintentionally actuating the On/Off switch.

Open the keyless chuck 2 by turning in rotation direction 1, until the tool can be inserted. Insert the tool. Firmly tighten the collar of the keyless chuck 2 by hand in rotation direction 2. This automatically locks the drill chuck.

Dust/Chip Extraction

Dust from materials such as lead-containing coatings, some wood types, minerals, and metal can be harmful to one’s health and cause allergic reactions, leading to respiratory infections and/or cancer. Materials containing asbestos may only be worked by specialists.
– Provide for good ventilation of the working place.
– It is recommended to wear a P2 filter-class respirator. Observe the relevant regulations in your country for the materials to be worked.
Prevent dust accumulation at the workplace. Dust can easily ignite.

Operation

Starting Operation
Inserting the battery
Note: The use of batteries not suitable for the machine can lead to malfunctions of or cause damage to the power tool.
Set the rotational direction switch 13 to the centre position in order to avoid unintentional starting. Insert the charged battery 8 into the handle so that it can be felt to engage and faces flush against the handle.
Reversing the rotational direction (see figure B)
The rotational direction switch 13 is used to reverse the rotational direction of the machine. However, this is not possible with the On/Off switch 14 actuated.
Rotate clockwise: Move the rotational direction switch 13 on both sides up to the stop into position**←**.
Rotate anticlockwise: Move the rotational direction switch 13 on both sides up to the stop into position **→**.
Setting the operating mode
Drilling
GSR 14,4 V-EC, GSR 18 V-EC: Set the torque selector setting ring 3 to the required torque.
GSB 14,4 V-EC, GSB 18 V-EC: Set the operating mode selector switch 4 to the “drilling” symbol.
Screwdriving
GSR 14,4 V-EC, GSR 18 V-EC: Set the torque selector setting ring 3 to the “screwdriving” symbol.
GSB 14,4 V-EC, GSB 18 V-EC: Set the operating mode selector switch 4 to the “screwdriving” symbol.
Impact drilling(GSB 14,4 V-EC, GSB 18 V-EC) Set the operating mode selector switch 4 to the “impact drilling” symbol.

Switching On and Off
To start the machine, press the On/Off switch 14 and keep it pressed.
The LED 10 lights up when the On/Off switch 14 is halfway or fully pressed and enables illumination of the screwing location in unfavorable light conditions.
To save energy, only switch the power tool on when using it.
Adjusting the Speed
The speed of the switched-on power tool can be variably adjusted, depending on how far the On/Off switch 14 is pressed.
Light pressure on the On/Off switches 14 results in a low rotational speed. Further pressure on the switch results in an increase in speed.
Setting the torque
With the torque preselection ring 3, the required torque can be preselected in 20 steps. The inserted tool is stopped as soon as the set torque is reached.
Gear selection, mechanical

The gear selector 5 can be actuated at standstill or when the machine is running. However, this should not be done while operating at full load or maximum speed.

1st gear: Low-speed range; for working with large drilling diameters.
2nd gear: High-speed range; for drilling with a small drilling diameter.
Temperature Dependent Overload Protection
When used as intended for, the power tool cannot be subject to overload. When the load is too high or the allowable battery temperature range is exceeded, the speed is reduced. The power tool will not run at full speed until reaching the allowable battery temperature.
Activation of the temperature-controlled overload protector is indicated by the LED 11 on the power tool lighting up red. The LED 11 will go out once the temperature of the tool’s battery is back within the permissible range.
Protection Against Deep Discharging
The lithium-ion battery is protected against deep discharging by the “Electronic Cell Protection (ECP)”. When the battery is empty, the machine is switched off by means of a protective circuit: The inserted tool no longer rotates.
Rapid Shut-off
The rapid shut-off feature enables better control of the power tool. The power tool shuts off in case of sudden and unexpected rotation of the power tool around the drilling axis. The rapid shut-off feature is indicated by a flashing LED on the power tool.
To restart the machine , release the On/Off switch and then actuate again.

Rapid shut-off can trigger only when the power tool is running at maximum operating speed and can rotate freely around the drill bit axis. Choose a suitable work position for this. Otherwise, rapid shut-off will not be ensured.

Working Advice

Apply the power tool to the screw only when it is switched off. Rotating tool inserts can slip off.

An auxiliary tool can be used to remove the screwdriver bit, a universal bit holder.
Belt Clip
With belt clip 7, the machine can be hung onto a belt. The user has both hands free and the machine is always at hand.
Colour clip (see figure D)
You can use the color clip 6 to individually label the power tool.

Maintenance and Service

Maintenance and Cleaning

Before any work on the machine itself (e. g. maintenance, tool change, etc.) as well as during transport and storage, remove the battery from the power tool. There is a danger of injury when unintentionally actuating the On/Off switch.
For safe and proper working, always keep the machine and ventilation slots clean.

When the battery is no longer operative, please refer to an authorized after- sales service agent for Bosch power tools.
After-sales Service and Application
Service Our after-sales service responds to your questions concerning the maintenance and repair of your product as well as spare parts. Exploded views and information on spare parts can also be found at: www.bosch- pt.com
Bosch’s application service team will gladly answer questions concerning our products and their accessories.
In all correspondence and spare parts orders, please always include the 10-digit article number given on the nameplate of othe product.

Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com| Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
---|---
Australia, New Zealand, and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
www.bosch.com.au| Republic of South Africa
Customer service
Hotline: (011) 6519600
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Johannesburg
Tel.: (011) 4939375
Fax: (011) 4930126
E-Mail: bsctools@icon.co.za| KZN – BSC Service Centre
Unit E, Almar Centre
143 Crompton Street
Pinetown
Tel.: (031) 7012120
Fax: (031) 7012446
E-Mail: bsc.dur@za.bosch.com
Western Cape – BSC Service Centre
Democracy Way, Prosperity Park
Milnerton
Tel.: (021) 5512577
Fax: (021) 5513223
E-Mail: bsc@zsd.co.za| Bosch Headquarters
Midrand, Gauteng
Tel.: (011) 6519600
Fax: (011) 6519880
E-Mail: rbsa-hq.pts@za.bosch.com

Transport
The contained lithium-ion batteries are subject to the Dangerous Goods Legislation requirements.
The user can transport the batteries by road without further requirements. When being transported by third parties (e.g.: air transport or forwarding agency), special requirements on packaging and la-belling must be observed. For the preparation of the item being shipped, consulting an expert for hazardous material is required.
Dispatch batteries only when the housing is undamaged. Tape or mask off open contacts and pack up the battery in such a manner that it cannot move around in the packaging. Please also observe possibly more detailed national regulations.
Disposal
The machine, rechargeable batteries, accessories, and packaging should be sorted for environmental-friendly recycling.
Do not dispose of power tools and batteries/rechargeable batteries into household waste!
Only for EC countries:
**** According to the European Guideline 2012/19/EU, power tools that are no longer usable, and according to the European Guideline 2006/66/EC, defective or used battery packs/batteries, must be collected separately and disposed of in an environmentally correct manner.
Batteries no longer suitable for use can be directly returned at:

Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
Battery packs/batteries:
Li-ion: Please observe the instructions in section “Transport”, page 18. Subject to change without notice.

|
---|---
GBA 14,4 V.| GBA 18 V.
GBA 18V… W
|
AL 1820 CV
(14,4 / 18 V)| AL 1880 CV
(14,4 / 18 V)
|
AL 1880 CV
(14,4 / 18 V)| 2 608 438 692
(L-BOXX 136)
|
1 600 A00 2WA| 1 600 A00 2WC

Robert Bosch Power Tools GmbH
70538 Stuttgart
GERMANY
www.bosch-pt.com
1609 92A 33A (2015.09) I / 220 EURO