FirsTime Co 70480_IM Dark Silver Hayden Nesting End Table Instruction Manual
- June 15, 2024
- FIRSTIME CO
Table of Contents
FirsTime Co 70480_IM Dark Silver Hayden Nesting End Table Instruction
Manual
PARTS
INSTALLATION INSTRUCTION
Large Table
STEP 1
Attach Legs Cx3 To The Large top A.
Tighten Screws 75%
STEP 2
Attach base B to the legs Cx3.
Tighten all screws 100%.
Rotate Table
Note:
Place screw E through WIDE opening on bottom of base B.
Small Table
STEP 3
Attach legs Hx3 to the small top F.
Tighten screws 75%.
STEP 4
Attach Base G to the legs Hx3.
Tighten all screws 100%
Rotate Table.
Note:
Place screw J through WIDE opening on bottom of base G.
NOTE:
Screws D+E & I+J will be attached to top A+F and leg pieces C+H. Please
remove before assembly. Do not tighten screws 100% until Fully assembled. 36
LB. Wight LIMIT.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>