KASTA MEPBLS1440-WH Unison Switch Relay Instruction Manual
- June 9, 2024
- KASTA
Table of Contents
MEPBLS1440-WH Unison Switch Relay
Instruction Manual
APP Installation
Visit www.kasta.com.au or your app store to
download the free KASTA app.
iOS: requires iOS 9.0 or later.
Android: requires Android 4.4 or later. Devices must support Bluetooth
4.0
Important Safety Information
- This product must be installed by a licensed electrician in accordance with all the require ments of AS/NZS 3000 (current edition) and other relevant Standards and Regulations.
- Electricity MUST be disconnected prior to installation. Failure to do so may result in serious injury and or loss of life.
- Indoor use only. Not suitable for damp or explosive environments.
- Complies to Australian Standards AS/NZS AS/NZS 60669.2.1, AS/NZS 60669.1, AS/NZS CISPR 15
- No user serviceable parts inside.
FEATURES
- Relay for switching a load on and off.
- Push Button Control.
- Fits most Australian Standard wall mech apertures.
- Simple 3 wire connection-Active in, load out and neutral.
- Integral blue backlight that can be enabled/disabled after installation.
FUNCTION SETUP
ON/OFF SWITCH: 1 CLICK
Turns load or off.
BACKLIGHT ON/OFF: 7 CLICKS
Disables or enables backlight on button.
FACTORY RESET: 9 CLICKS
Restores all settings back to factory.
*If successful, light will pulse the number of times that the switch was clicked, indicating function.
TECHNICAL SPECIFICATIONS
Operating Temp: -20ºc to 40ºc
Supply: 220-240V AC 50Hz
Load: 480W
Thermal Derating: 25ºc to 40º (480W-100 W)
CONNECTION DIAGRAM
ONE WAY SWITCHING
kasta.com.au
(02) 9168 5900
ver 1.2
Documents / Resources
|
KASTA MEPBLS1440-WH Unison Switch
Relay
[pdf] Instruction Manual
MEPBLS1440-WH Unison Switch Relay, MEPBLS1440-WH, Unison Switch Relay, Switch
Relay, Relay
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>