KASTA D1-10VIBH Smart 1-10V Dimmer Instruction Manual
- June 5, 2024
- KASTA
Table of Contents
Installation Instructions
Smart 1-10V Dimmer
Product Code: D1-10VIBH
APP Installation
Visit www.kasta.com.au or your app store to download the free KASTA app. iOS: requires iOS 9.0 or later. Android: requires Android 4.4 or later. Devices must support Bluetooth 4.0
Important Safety Information
- This product must be installed by a licensed electrician in accordance with all the requirements of AS/NZS 3000 (current edition) and other relevant Standards and Regulations.
- Electricity MUST be disconnected prior to installation. Failure to do so may result in serious injury and or loss of life.
- Indoor use only. Not suitable for damp or explosive environments.
- Complies to Australian Standards AS/NZS 60950.1:2015, AS/NZS CISPR 15.
- No user-serviceable parts inside.
FEATURES
- Smart functions via phone/tablet with the app such as schedules, timers, scenes, and groups.
- Dimmable (via KASTA app, KASTA remotes, KASTA SLO2AB-BH, or Push button momentary switch only).
- To prevent a reduction in Bluetooth signal strength, install a line of sight between devices if possible.
- 1-10V output signal suitable for 1-10V LED driver
- Controls the output according to the Bluetooth® the signal received from the daylight sensor
FUNCTION SETUP
(using KASTA-RB02-W smart remote switch or momentary switch)
| ON/OFF SWITCH | SHORT PRESS |
|---|---|
| Turns lights on or off. | |
| DIM UP/DOWN | ONE LONG PRESS |
When lights are on, long-press the button to dim up or down. Release the
button to stop.|
FULL BRIGHTNESS| 2 CLICKS
Sets lights to full brightness.|
ADD DELAY TO OFF| 3 CLICKS
Lights automatically turn off after set time.|
6 CLICKS PAIRING MODE| 6 CLICKS
Enter pairing mode for multi-way dimming.|
FACTORY RESET| 9 CLICKS
Reset the password to the default setting.
*If successful, light pulse the number of times that the switch was clicked, indicating function.
TECHNICAL SPECIFICATIONS
| Operating Temp: | -20ºc to 50ºc |
|---|---|
| Operating Frequency: | 2.4Ghz |
| Supply: | 220-240V~50/60Hz |
| Output Current (Max.): | 40mA |
| Dimming Method: | 1-10V |
| IP Rating: | IP65 |
| Maximum Number of Drivers: | IP65 |
| Dimensions: | 125x51x44mm |
CONNECTION DIAGRAM
ver 1.4
kasta.com.au
(02) 9168 5900
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>