KASTA H1CSB Prescene Touch Remote Switch Instruction Manual
- June 5, 2024
- KASTA
Table of Contents
Installation Instructions HESPERUS Presence Touch Remote Switch
Product Code: H1CSB/H2CSB/H3CSB/ H4CSB/H6CSB
APP Installation
Visit www.kasta.com.au or your app store to
download the free KASTA app. iOS: requires iOS 9.0 or later.
Android: requires Android 4.4 or later. Devices must support Bluetooth 4.0
Important Safety Information
- This product must be installed by a licensed electrician in accordance with all the requirements of AS/NZS 3000 (current edition) and other relevant Standards and Regulations.
- Electricity MUST be disconnected prior to installation. Failure to do so may result in serious injury and or loss of life.
- Indoor use only. Not suitable for damp or explosive environments.
- Complies to Australian Standards AS/NZS 60950.1:2015, AS/NZS CISPR 15.
- No user-serviceable parts inside.
FEATURES
- Mains-powered capacitive touch remote switch mechanism.
- Simple 2 wire connection A, N (LOOP available).
- Pairs to existing hard wired KASTA devices including Switch Relays, Dimmers, Curtain controllers, and many other devices.
- Configure smart functions via the KASTA app such as timers, scenes, and groups as well as button indicator backlight.
- Fits most Australian Standard wall mounting accessories.
- Integral white backlight.
- To prevent a reduction in Bluetooth ® signal strength, install it away from metal objects.
FUNCTION SETUP
| ON/OFF | 1 PRESS |
|---|
Turns paired device on or off. When paired with a dimmable light, light will
adjust to previous brightness level.
DIM UP/DOWN| ONE LONG PRESS
When paired with a light, long press button to dim up or down. Release button
to stop.
FULL BRIGHTNESS| 2 PRESSES
When paired with a light, sets light to full brightness.
DELAY TO OFF| 3 PRESSES
Paired device turns off automatically after a set time (comfigured in the
app). Single click to cancel.
VARIABLE| 4 PRESSES
Refer to the paired device for functionality.
VARIABLE| 5 PRESSES
Refer to the paired device for functionality.
BACKLIGHT| 7 PRESSES
Enable 10% backlight brightness. 7 presses to disable.
FACTORY RESET| 9 PRESSES
9 clicks of any button, restores all settings back to factory.
*If successful, the white LED indicator will flash once.
APP ENABLED FUNCTION
| RETRIGGER TIMER | 1 PRESS |
|---|
Commence timer (on/off). Function must be programmed through the KASTA app first.
TECHNICAL SPECIFICATIONS
Operating Temp: -20ºc to 40ºc
Supply: 220-240V AC 50Hz
CONNECTION DIAGRAM
ver 1.4
kasta.com.au
(02) 9168 5900
Documents / Resources
|
KASTA H1CSB Prescene Touch Remote
Switch
[pdf] Instruction Manual
H1CSB, H2CSB, H3CSB, H4CSB, H6CSB, H1CSB Prescene Touch Remote Switch, H1CSB,
Prescene Touch Remote Switch
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>