KASTA KF2PPHB Series Powerpoint Double Instruction Manual
- June 5, 2024
- KASTA
Table of Contents
KASTA KF2PPHB Series Powerpoint Double
APP Installation
- Visit www.kasta.com.au or your app store to download the free KASTA app.
- iOS: requires iOS 9.0 or later.
- Android: requires Android 4.4 or later.
- Devices must support Bluetooth 4.0
Important Safety Information
This product must be installed by a licensed electrician in accordance with all the requirements of AS/NZS 3000 (current edition) and other relevant Standards and Regulations.
- Electricity MUST be disconnected prior to installation. Failure to do so may result in serious injury and or loss of life.
- Indoor use only. Not suitable for damp or explosive environments.
- Complies to Australian Standards AS/NZS 60950.1:2015, AS/NZS CISPR 15.
- No user-serviceable parts inside.
FEATURES
Control and monitor appliances with a standard 2 or 3-pin plug.
- 2x 10A individually switched power outlets.
- Simple 3 wire connection – A, N, E.
- Pair with KASTA remote switch devices for control (up to 8x maximum).
- Smart functions per outlet programmed via phone/tablet with the KASTA app. This includes schedules, timers, scenes, and groups.
- Child Lock function per outlet (lock outlet in the off state) activated from the button or the KASTA app.
- Energy monitoring function per outlet viewed from the KASTA app.
- Built-in overvoltage, overcurrent, and overtemperature protection.
FUNCTION SETUP
Operate via individual Load Control Button.
ON/OFF BUTTON 1 CLICK
Turns load on or off. Button LED indicator is white when on.
CHILD LOCK 4 SECOND LONG PRESS
(WHEN OUTLET IS OFF)
Button LED indicator changes to green if successful after long press (four
seconds).
Long press (four seconds) again to deactivate.
DELAY TO OFF 3 CLICKS
- Load automatically turns off after set time selected via the app.
- The LED indicator will flash 3 times if successful. 1 click to cancel.
- An LED indicator will flash once.
FACTORY RESET 9 CLICKS
- Restores all settings back to the factory.
- If successful, light and LED indicator light will pulse the number of times that the button was clicked, indicating function.
TECHNICAL SPECIFICATIONS
- Operating Temp: -20ºc to 40ºc
- Supply: 220-240V AC 50Hz
- Maximum Load: 2 x 10A (2400W)
CONNECTION DIAGRAM
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>