KASTA H2PPHB Powerpoint Double Horizontal Instruction Manual
- October 27, 2023
- KASTA
Table of Contents
KASTA H2PPHB Powerpoint Double Horizontal Instruction
APP Installation
Visit www.kasta.com.au or your app store to download the free KASTA app. iOS: requires iOS 9.0 or later. Android: requires Android 4.4 or later. Devices must support Bluetooth 4.0
Important Safety Information
- This product must be installed by a licensed electrician in accordance with all the requirements of AS/NZS 3000 (current edition) and other relevant Standards and Regulations.
- Electricity MUST be disconnected prior to installation. Failure to do so may result in serious injury and or loss of life.
- Indoor use only. Not suitable for damp or explosive environments.
- Complies to Australian Standards: AS/NZS 3112; AS/NZS 60669.2.1; AS/NZS 4268 and AS/NZS CISPR 15.
- No user serviceable parts inside.
- It is strongly recommended to have a surge protection device installed at the main switchboard. Products that are damaged by power surges are not covered by warranty.
FEATURES
- Control and monitor appliances with a standard 2 or 3-pin plug.
- 2x 10A individually switched power outlets.
- Simple 3 wire connection – A, N, E.
- Pair with KASTA remote switch devices for control (up to 8x maximum).
- Smart functions per outlet programmed via phone/tablet with the KASTA app. This includes schedules, timers, scenes and groups.
- Child Lock function per outlet (lock outlet in off state) activated from the button or the KASTA app.
- Energy monitoring function per outlet viewed from the KASTA app.
- Built in overvoltage, overcurrent and overtemperature protection.
FUNCTION SETUP
-
ON/OFF SWITCH: 1 CLICK
Turns load on or off. Button LED indicator is blue when on. -
CHILD LOCK: 4 SECOND LONG PRESS
(WHEN OUTLET IS OFF)
Button LED indicator changes to green if successful after long press (four seconds).
Long press (four seconds) again to deactivate. -
DELAY TO OFF : 3 CLICKS
Load automatocally turns off after set time selected via the app.
LED indicator will flash 3 times if successful. 1 click to cancel,
LED indicator will flash once. -
FACTORY RESET : 9 CLICKS
Restores both outlets back to factory setttings.
If successful, light and LED indicator light will pulse the number of times that the button was clicked, indicating function.
TECHNICAL SPECIFICATIONS
- Supply: 220-250V a.c. 50Hz
- Operating Temp: -20ºc to 40ºc
- Maximum Load: 2 x 10A (2400W)
CONNECTION DIAGRAM
kasta.com.au
(02) 9168 5900
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>