KASTA-D1-10VIB Smart 0-10V Dimmer Instruction Manual
- June 1, 2024
- KASTA
Table of Contents
KASTA-D1-10VIB Smart 0-10V Dimmer
Product Information
- Specifications
- Product Name: Smart 0-10V Dimmer
- Product Code: KASTA-D1-10VIB
- Compatibility: iOS 9.0 or later, Android 4.4 or later, Bluetooth 4.0
- Manufacturer: KASTA
- Version: 1.4
Product Usage Instructions
- APP Installation
- Visit www.kasta.com.au or your app store to download the free KASTA app.
- For iOS devices, ensure iOS 9.0 or later. For Android devices, ensure Android 4.4 or later with Bluetooth 4.0 support.
- Function Setup
- ON/OFF SWITCH:
- Short Press: Turns lights on or off.
- DIM UP/DOWN:
- One Long Press: When lights are on, a long press button to dim up or down. Release the button to stop.
- FULL BRIGHTNESS:
- Two Clicks: Sets lights to full brightness.
- ADD DELAY TO OFF:
- *Three Clicks:** Lights automatically turn off after a set time.
- RESTORE TO FACTORY SETTINGS:
- Nine Clicks: Reset password to the default setting.
- Contact Information
- For further assistance, please contact KASTA at kasta.com.au or (02) 9168 5900.
FAQs
- Q: How do I reset the device to factory settings?
- A: To reset the device to factory settings, perform nine clicks on the switch.
- Q: What devices are compatible with the Smart 0-10V Dimmer?
- A: The Smart 0-10V Dimmer is compatible with iOS devices running iOS 9.0 or later, Android devices running Android 4.4 or later, and devices that support Bluetooth 4.0.
Important Safety Information
- This product must be installed by a licensed electrician per all the requirements of AS/NZS 3000 (current edition) and other relevant Standards and Regulations.
- Electricity MUST be disconnected before installation. Failure to do so may result in serious injury and or loss of life.
- Indoor use only. Not suitable for damp or explosive environments
- Complies to Australian Standards AS/NZS 60669.2.1:2013 with AS/NZS 60669.1:2013 (IEC 60669-2-1 Ed. 4.1 MOD with IEC 60669-1 Ed.3.2 MOD).
- No user-serviceable parts inside.
FEATURES
- Smart functions via phone/tablet with the app such as schedules, timers, scenes and groups.
- Dimmable (via KASTA app, KASTA remotes, KASTA SLO2AB-BH or Push button momentary switch only).
- To prevent a reduction in Bluetooth signal strength, install with line of sight between devices if possible.
- 0-10V output signal suitable for 0-10V LED driver.
- Controls the output according to the Bluetooth® signal received from the daylight sensor.
FUNCTION SETUP
(using a smart remote switch or momentary switch)
Reset the password to the default setting.
- If successful, light will pulse the number of times that the switch was clicked, indicating function.
TECHNICAL SPECIFICATIONS
- Supply: 220-240V~50/60Hz
- Operating Frequency: 2.4Ghz
- Output Current (Max.): 40mA
- Operating Temp: -20ºc to 50ºc
- Dimming Method: 1-10V
- IP Rating: IP20
- Maximum Number of Drivers: 30
- Dimensions: 45x45x25mm
CONNECTION DIAGRAM
APP Installation
- Visit www.kasta.com.au or your app store to download the free KASTA app.
- iOS: requires iOS 9.0 or later.
- Android: requires Android 4.4 or later.
- Devices must support Bluetooth 4.0
- ver 1.4
- kasta.com.au.
- (02) 9168 5900
- Product Code: KASTA-D1-10VIB
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>