KASTA KB12RGBTWD1 RGB Tuneable White Downlight Instructions
- June 3, 2024
- KASTA
Table of Contents
KASTA KB12RGBTWD1 RGB Tuneable White Downlight
Product Code
- KB12TWD1-WH
- KB12RGBTWD1-WH
APP Installation
- Visit www.kasta.com.au or your app store to download the free KASTA app.
- iOS: requires iOS 9.0 or later.
- Android: requires Android 4.4 or later.
- Devices must support Bluetooth 4.0
Important Safety Information
- This product must be installed by a licensed electrician in accordance with all the requirements of AS/NZS 3000 (current edition) and other relevant Standards and Regulations.
- Electricity MUST be disconnected prior to installation. Failure to do so may result in serious injury and or loss of life.
- Indoor use only. Not suitable for damp or explosive environments.
- Complies to Australian Standards AS/NZS60598.2.2.
- No user serviceable parts inside.
- Not suitable for use with standard in-wall dimmers. Dimmable via the KASTA app only.
- Building insulation used to abut and cover the luminaire must meet the following requirements:
- Be of a type that can maintain its dimensions and structural integrity when exposed to the maximum surface temperatures of the class of luminaire, being 90 Degree Celsius and must withstand a 30s needle flame test carried out in accordance with AS/NZS 60695.11.5 with the flame applied to all surfaces of the sample.
- Loose fill insulation is permitted to abut or cover this luminaire.
FEATURES
- Tuneable White LED Downlight.
- RGB andTuneable White LED Downlight.
- 110mm diameter white trim.
- 90mm cut-out.
- Remote driver with flex and plug.
- IC-4 rated (AU) and IC-F rated (NZ).
- Wireless Bluetooth® Mesh communication.
- Control from the KASTA app or KASTA remote switch devices (8x maximum per downlight).
- On, off, dim and button press functions from local button (remote driver) or KASTA remote switch devices.
- Configured using the KASTA app (iOS and Android), with a white CCT dial, a RGB colour wheel and a pre-set colour palette.
- Supports Group, Scene, Timer and Scheduling automation functions.
- 3 year warranty.
FUNCTION SETUP
(Controllable via KASTA remote switch devices or the RESET button on the LED Driver)
- Restores all settings back to factory (using reset button only).
- If successful, light will pulse the number of times that the switch was clicked, indicating function.
TECHNICAL SPECIFICATIONS
CONNECTION DIAGRAM
CONTACT
- kasta.com.au
- TEL: (02) 9168 5900
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>